AIYIMA DC48V 10A GaN Power Supply Adapter User Manual

Introduzione

This manual provides essential information for the safe and efficient use of your AIYIMA DC48V 10A GaN Power Supply Adapter. This switching power supply is designed to convert AC110/220V input to a stable DC48V 10A output, suitable for various audio amplifiers, including the TPA3255 Stereo Audio Amplifier series (A07, A07 MAX, A08 PRO, A70).

The adapter features high efficiency, high power delivery, low power consumption, and is built with over-current, over-voltage, and short-circuit protection for reliable operation.

Cosa c'è nella scatola

1 x AIYIMA DC48V 10A GaN Power Supply Adapter (Model JYH37Z)

Note: An AC power cord is typically required and may be sold separately depending on the region.

Impostare

Disimballaggio: Estrarre con cautela l'alimentatore dalla confezione. Verificare che non presenti segni di danneggiamento.
Posizionamento: Place the power supply on a stable, flat surface with adequate ventilation. Ensure it is not covered or placed in an enclosed space that could restrict airflow.
Connettiti a Amplificatore: Locate the DC input port on your compatible audio amplifier (e.g., AIYIMA A07, A07 MAX, A08 PRO, A70). Connect the DC output cable (5.5*2.5mm connector) from the power supply to the amplifier's DC input port. Ensure a secure connection.
Collegamento all'alimentazione CA: Connect a suitable AC power cord (not included) to the AC input port on the power supply. Then, plug the AC power cord into a standard wall outlet (AC110V or AC220V, the unit supports both).
Accensione: Once all connections are secure, switch on the power supply (if it has a switch) and then power on your amppiù vivace.

Posteriore view of AIYIMA DC48V 10A GaN Power Supply Adapter showing AC input and DC output cable.

Immagine: Posteriore view of the power supply, illustrating the AC input port and the attached DC output cable.

In alto e in basso view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Immagine: parte superiore e inferiore views of the power supply, showing the overall design and the AC input port.

Istruzioni per l'uso

The AIYIMA DC48V 10A GaN Power Supply Adapter is designed for straightforward operation. Once properly connected to your audio amplifier and an AC power source, it will provide stable DC48V power.

Ensure the power supply is securely connected to both the AC mains and your amppiù vivace.
Se il tuo amplifier has a power switch, turn it on after the power supply is connected and powered.
The power supply operates automatically within its specified voltage range (AC110V-220V). No manual voltagLa selezione è obbligatoria.
Monitora il tuo amplifier's performance. This power supply is designed to enhance power delivery, dynamics, and clarity for compatible amplificatori.

Davanti view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Immagine: Frontale view of the power supply, showing its compact design.

Manutenzione

Per garantire la longevità e le prestazioni ottimali del tuo alimentatore, segui queste linee guida per la manutenzione:

Pulizia: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners, aerosols, or solvents.
Ventilazione: Ensure that the ventilation openings on the power supply are not blocked. Proper airflow is crucial to prevent overheating.
Magazzinaggio: Se si conserva l'unità per un periodo prolungato, scollegarla dall'alimentazione e conservarla in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
Cura del cavo: Avoid bending or crimping the power cables excessively. Regularly check cables for any signs of wear or damage.

Risoluzione dei problemi

If you encounter issues with your AIYIMA DC48V 10A GaN Power Supply Adapter, refer to the following common troubleshooting steps:

Problema	Possibile causa	Soluzione
Nessun potere di amppiù vivace	Cavo di alimentazione CA non collegato o allentato. La presa a muro non funziona. Power supply or ampspegnere il filtro.	Ensure AC power cord is securely plugged into both the power supply and the wall outlet. Provare la presa a muro con un altro dispositivo. Verify both the power supply and amplifier are switched on.
Humming or noise from amppiù vivace	Problema di ground loop. Interferenze da altri dispositivi elettronici.	Ensure all audio components are connected to the same power strip or outlet. Try isolating the power supply from other devices. Consider using a ground loop isolator if the issue persists.
Power supply feels excessively hot	Ventilazione inadeguata. Overload (drawing too much current).	Ensure proper airflow around the unit. Do not cover. Verifica il tuo amplifier's power requirements do not exceed the power supply's 10A rating.

If the problem persists after attempting these solutions, please contact AIYIMA customer support.

Specifiche

AIYIMA DC48V 10A GaN Power Supply Adapter with dimensions labeled.

Image: Dimensions of the AIYIMA DC48V 10A GaN Power Supply Adapter.

Caratteristica	Dettaglio
Modello	JYH37Z
Marca	AIYIMA
Ingresso volumetage	AC 110V / 220V (Auto-sensing)
Volume di uscitatage	CC 48V
Corrente di uscita	10A
DC Connector Size	5.5*2.5 mm
Tipo di materiale	GaN (nitruro di gallio)
Dimensioni articolo (L x P x A)	8.18 x 3.58 x 1.69 pollici (208 x 91 x 43 mm)
Peso dell'articolo	2.5 libbre
Certificazione di sicurezza	Certificazione TÜV

Garanzia

This AIYIMA power supply comes with a Garanzia di 12 mesi dalla data di acquisto. La presente garanzia copre difetti di fabbricazione e malfunzionamenti in condizioni di normale utilizzo. Non copre danni causati da uso improprio, incidenti, modifiche non autorizzate o installazione impropria.

Conservare la prova d'acquisto per eventuali richieste di garanzia.

Supporto

For technical assistance, troubleshooting, or warranty inquiries, please contact AIYIMA customer support through the retailer where the product was purchased or visit the official AIYIMA websito.

AIYIMA Official Store: ExploreHiFi·HearTrue on Amazon

AIYIMA JYH37Z