Amewi Stingray Speedboat (Model 26108) Instruction Manual

1. Informazioni importanti sulla sicurezza

Avvertimento: This product is not suitable for children under 3 years due to small parts that could be swallowed, posing a choking hazard.

• Always operate the speedboat in open water areas, away from swimmers, animals, and other watercraft.
• Ensure the operating area is clear of obstacles such as weeds, rocks, or debris that could interfere with the jet drive.
• Non utilizzare l'imbarcazione in acqua salata, poiché ciò potrebbe danneggiare i componenti interni.
• Keep fingers and loose clothing away from the jet drive intake and outlet during operation.
• Always remove the battery from the boat and the transmitter when not in use.
• Sorvegliare i bambini durante il funzionamento.

2. Cosa c'è nella scatola

Si prega di verificare il contenuto del pacco in base all'elenco sottostante:

• Amewi Stingray Speedboat Model
• Telecomando 2.4GHz
• Li-ion 2S 7.4V 2000mAh 15C Battery
• Cavo di ricarica USB
• Attrezzo
• Supporto per barca
• Manuale di istruzioni (questo documento)

Accessori richiesti (non inclusi): 3 x 1.5V AA batteries for the remote control.

3. Guida all'installazione

3.1. Ricarica della batteria della barca

The included Li-ion 2S 7.4V 2000mAh battery powers the speedboat.

1. Connect the Li-ion battery to the USB charging cable.
2. Collegare il cavo di ricarica USB a una fonte di alimentazione USB adatta (ad esempio, una porta USB del computer, un adattatore da parete USB).
3. L'indicatore di carica sul cavo USB mostrerà lo stato di carica (fare riferimento al comportamento specifico dell'indicatore del caricabatterie).
4. Charging typically takes 90-120 minutes. Do not overcharge the battery.
5. Una volta caricata completamente, scollegare la batteria dal caricabatterie.

Image: Internal components of the speedboat, including the battery and motor assembly.

3.2. Installazione delle batterie del trasmettitore

The 2.4GHz remote control requires 3 x 1.5V AA batteries (not included).

1. Aprire il vano batterie sul retro del telecomando.
2. Inserire 3 batterie AA, assicurandosi della corretta polarità (+/-).
3. Chiudere bene il vano batterie.

Image: The 2.4GHz remote control for the speedboat.

3.3. Preparing the Speedboat

1. Carefully remove the top hull cover(s) of the speedboat. The boat features a double hull cover for water protection.
2. Connect the fully charged Li-ion battery to the boat's power connector.
3. Carefully place the battery inside the hull, ensuring wires are not pinched.
4. Securely reattach both hull covers to prevent water ingress. Ensure all latches or seals are properly engaged.

Immagine: in alto view of the speedboat, showing the double hull cover design.

4. Istruzioni per l'uso

4.1. Accensione e accoppiamento

1. Place the speedboat gently into the water. The boat's electronics will activate upon contact with water.
2. Turn on the remote control. The remote control and boat should automatically pair. A successful pairing is usually indicated by a solid light on both devices.
3. Se l'associazione non riesce, spegnere entrambi i dispositivi e ripetere la procedura.

4.2. Controlli di base

• Grilletto dell'acceleratore: Pull the trigger to move forward, push to reverse (if applicable). The jet drive provides strong acceleration.
• Volante: Turn the wheel left or right to steer the boat. The thrust vector control allows for high agility and maneuverability.
• Regolazioni di assetto: Use the trim buttons on the remote control to fine-tune steering and throttle for straight running.
• Rash Limitation (Dual Rate): Adjust the sensitivity of the steering and throttle for different driving styles or conditions.

Immagine: Posteriore view of the speedboat, highlighting the jet drive mechanism.

4.3. Funzionalità avanzate

• Switchable LED Lighting: The boat features front and rear LED lighting, which can be switched on/off via the transmitter. This is useful for operation at dusk.
• Sottovoltage Avvertenza: The 2.4GHz transmitter system includes an undervoltage warning function to prevent the boat battery from being discharged too deeply. Pay attention to audible or visual warnings from the transmitter.
• Range Warning: The transmitter will alert you if the boat is approaching or exceeding its maximum operating range (60-80 meters). Bring the boat closer immediately if this warning activates.
• Funzione di auto-raddrizzamento: In case of a rollover, the boat is designed to self-right, allowing it to continue operation without manual intervention.

The Amewi Stingray Speedboat can reach speeds of up to 40 km/h and offers a driving time of up to 12 minutes on a full charge.

5. Manutenzione

• Dopo ogni utilizzo:
  • Remove the boat from the water and immediately disconnect the battery.
  • Open the hull covers and carefully drain any accumulated water. Wipe the interior dry with a soft cloth.
  • Inspect the jet drive intake for any debris (weeds, leaves, etc.) and remove them carefully.
  • Clean the exterior of the boat with a damp stoffa. Non utilizzare prodotti chimici aggressivi.
  • Ensure the water cooling system's inlet and outlet are clear.
• Cura della batteria:
  • Store Li-ion batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store batteries fully charged or fully discharged for extended periods. Aim for a storage charge of around 50%.
• Hull Seals: Regularly inspect the rubber seals around the hull covers for any signs of wear or damage. Damaged seals can lead to water ingress.

6. Risoluzione Dei Problemi

7. Specifiche

8. Garanzia e supporto

Per informazioni sulla garanzia, assistenza tecnica o parti di ricambio, contattare il rivenditore o direttamente il produttore. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Produttore: Amewi