1. Introduzione
The Noyafa NF-563 is a portable digital thermometer and hygrometer designed for accurate measurement of temperature and relative humidity. This device is suitable for various applications including indoor and outdoor environmental monitoring, HVAC systems, agriculture, and industrial settings. It features a high-precision sensor, backlit LCD screen, and multiple measurement functions to provide reliable data.
2. Caratteristiche del prodotto
- High-precision sensors for accurate readings.
- Measures temperature and relative humidity.
- Calculates dew point and wet bulb temperature.
- Funzione di conservazione dei dati.
- MAX/MIN value display.
- Switchable temperature units (Celsius/Fahrenheit).
- Display LCD retroilluminato per una chiara visibilità in diverse condizioni di illuminazione.
- Low power warning indicator.
- Funzione di spegnimento automatico per preservare la durata della batteria.

Figura 2.1: Oltreview of Noyafa NF-563 functions and display.

Figure 2.2: Detail of the high-precision sensor for accurate measurements.

Figure 2.3: The HD backlit display ensures readability in various lighting conditions.
3. Impostazione
3.1 Installazione della batteria
The Noyafa NF-563 requires batteries for operation. To install or replace batteries:
- Individuare il vano batteria sul retro del dispositivo.
- Aprire il coperchio del vano batterie.
- Inserire le batterie necessarie, assicurandosi della corretta polarità (+/-).
- Chiudere saldamente il coperchio del vano batterie.
Video 3.1: This video demonstrates the battery installation process for the Noyafa NF-563 and initial power-on sequence.

Figura 3.1: Fronte e retro view of the Noyafa NF-563, indicating the battery compartment.
4. Istruzioni per l'uso
4.1 Accensione/spegnimento
Per accendere il dispositivo, tenere premuto il pulsante di accensione (Acceso/Spento) until the display illuminates. To power off, press and hold the power button again.
4.2 Commutazione delle unità di temperatura
The device can display temperature in Celsius (°C) or Fahrenheit (°F). To switch between units, short press the ° C / ° F pulsante.

Figura 4.1: Passaggio tra le unità di temperatura Celsius e Fahrenheit.
4.3 Funzione di conservazione dei dati
Per congelare le letture correnti sul display, premere il tasto HOLD BL pulsante. Premerlo nuovamente per rilasciare il blocco e riprendere le letture in tempo reale.
4.4 Misurazione MAX/MIN
A view the maximum or minimum recorded temperature and humidity values, press the MASSIMO MIN button. Each press will cycle through MAX, MIN, and current readings.
4.5 Controllo della retroilluminazione
To activate or deactivate the display backlight, press and hold the HOLD BL pulsante.
5. Manutenzione
5.1 Pulizia
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the sensor area is kept clean and free from dust or debris for accurate readings.
5.2 Conservazione
Quando non si utilizza il dispositivo per lunghi periodi, rimuovere le batterie per evitare perdite. Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
6. Risoluzione Dei Problemi
6.1 No Display/Device Not Turning On
- Controllare che le batterie siano installate correttamente, con la giusta polarità.
- Sostituisci le batterie vecchie o esaurite con batterie nuove.
- Assicurarsi che il pulsante di accensione sia premuto a sufficienza.
6.2 Letture imprecise
- Assicurarsi che la sonda del sensore sia pulita e libera da ostruzioni.
- Allow the device to stabilize in the measurement environment for a few minutes.
- Avoid placing the device near heat sources, direct sunlight, or strong air currents that could affect readings.
- Verify that the device is within its specified operating temperature and humidity ranges.
6.3 Display Flickering or Unresponsive
- Replace batteries if the low power indicator is on or if the display is dim.
- Try restarting the device by removing and reinserting the batteries.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | NOYAFA |
| Modello | NOYAFA-NF563 |
| Intervallo di temperatura | da 32°F a 140°F (da 0°C a 60°C) |
| Precisione della temperatura | ± 0.5556 ° F (± 0.3 ° C) |
| Umidità ambiente | 0% al 100% di umidità relativa |
| Precisione dell'umidità | ±3% RH (at 25°C, 20%~80% RH) |
| Voltage | 3.7 Volts (Battery dependent) |
| Tipo di montaggio | Da tavolo |
8. Garanzia e supporto
8.1 Informazioni sulla garanzia
NOYAFA products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official NOYAFA websito per termini e condizioni di garanzia specifici.
8.2 Assistenza clienti
For technical assistance, troubleshooting, or product inquiries, please contact NOYAFA customer support through their official website or the contact information provided in your product packaging. Ensure you have your model number (NF-563) and purchase details ready when contacting support.