1. Introduzione
Grazie per l'acquistoasing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Informazioni sulla sicurezza
- Sicurezza degli occhi: Do not look directly into the laser light beam. Direct exposure to laser light can cause eye damage.
- Fonte di energia: Assicurarsi che la fonte di alimentazione corrisponda al voltage requirements specified on the product label. Use only the provided power adapter.
- Uso esterno: While the projector is IP65 waterproof, ensure the power adapter and connections are protected from water exposure.
- Installazione: Install the projector securely to prevent it from falling or being dislodged by wind or other environmental factors.
- Bambini e animali domestici: Tenere il dispositivo fuori dalla portata dei bambini e degli animali domestici per evitare danni o lesioni accidentali.
- Temperatura: Do not operate the device outside its specified temperature range (-30°F to 104°F).
- Manutenzione: Non tentare di aprire o riparare il dispositivo da soli. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti nel pacco:
- Minetom RGB Christmas Laser Light Projector
- Controllo remoto RF
- Palo di terra
- Base tonda
- Power Adapter (with 16.4ft extension cord)
- Manuale dell'utente (questo documento)
4. Impostazione
4.1 Scelta di un metodo di installazione
The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.
- Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
- Montaggio a parete: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
- Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.
4.2 Collegamento di alimentazione
- Connect the projector to the provided power adapter.
- Use the 16.4ft extension cord to reach a suitable outdoor power outlet.
- Assicurarsi che tutti i collegamenti siano sicuri e protetti dall'umidità.
- Collegare l'adattatore di alimentazione a una presa elettrica dotata di messa a terra.
5. Istruzioni per l'uso
Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.
5.1 Funzioni del telecomando
The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Image: RF Remote Control layout with functions for each button.
| Pulsante | Funzione |
|---|---|
| ACCESO/SPENTO | Accende o spegne il proiettore. |
| 2 ore / 4 ore / 6 ore | Sets the timer for 2, 4, or 6 hours. |
| (H) Restore | Restores to default timing (6 hours on, 18 hours off). |
| Ciclo colore | Cycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle. |
| Modalità di respirazione | Activates a slow fade-in/fade-out effect. |
| Jumping Mode | Activates a rapid color change effect. |
| S0 (Static) | Sets the light display to static (no motion). |
| S- / S+ | Adjusts rotation speed (S- for slow, S+ for fast). |
| R/G/B | Selects Red, Green, or Blue light individually. |
| R/G/B Breathing | Activates breathing mode for individual Red, Green, or Blue colors. |
| R/G/B Strobe | Activates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop). |
| R/G/B Steady | Sets individual Red, Green, or Blue colors to steady (non-flashing). |
5.2 combinazioni di colori
The projector supports various color combinations to create diverse effects.

Immagine: Examples of the 7 available color combinations.
- Rosso
- Verde
- Blu
- Rosso Verde
- Rosso Blu
- Verde Blu
- Rosso Verde Blu
6. Grado di impermeabilità IP65
The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.
7. Coverage Area
The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.
8. Manutenzione
- Pulizia: Gently wipe the projector lens and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Magazzinaggio: Quando non in uso, conservare il proiettore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Ispezione dei cavi: Periodically check the power cord and adapter for any signs of damage. Discontinue use if damage is found.
9. Risoluzione Dei Problemi
| Problema | Soluzione |
|---|---|
| Il proiettore non si accende. |
|
| Il telecomando non risponde. |
|
| L'emissione luminosa è debole o incostante. |
|
| Multiple projectors interfere with each other. |
|
10. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | BL-HW02 |
| Marca | Minetom |
| Colore | Rosso Verde Blu |
| Materiale | Plastica |
| Tipo di finitura | Proiettore |
| Tipo di sorgente luminosa | Diodo ad emissione luminosa |
| Fonte di alimentazione | Elettrico con cavo |
| Tipo di montaggio | Montaggio a pavimento, montaggio a parete |
| Dimensioni del prodotto | 2.75 cm L x 2.75 cm P x 11.02 cm A |
| Peso dell'articolo | 14 once |
| Angolo del fascio | 120 gradi |
| Grado di impermeabilità | Grado di protezione IP65 |
| Temperatura di esercizio | -30°F a 104°F |
| Coverage Area (approx.) | 3229.17 sq ft at 32.8 ft distance |
11. Garanzia e supporto
For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom websito. Conserva la ricevuta d'acquisto come prova d'acquisto.