Introduzione
Grazie per l'acquistoasing the AODK L-Shaped Gaming Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read these instructions carefully before beginning assembly and retain them for future reference.
Informazioni sulla sicurezza
- Montare sempre la scrivania su una superficie morbida e pulita per evitare graffi.
- Assicurarsi che tutte le viti e gli elementi di fissaggio siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
- Do not exceed the maximum weight capacity of 50 kg (110 lbs) for the desktop.
- Per evitare rischi di soffocamento, tenere le parti di piccole dimensioni e i materiali di imballaggio lontano dalla portata dei bambini.
- Evitare di appoggiare oggetti caldi direttamente sulla superficie della scrivania senza protezione.
- Non stare in piedi o seduto sulla scrivania.
- Utilizzare solo l'adattatore di alimentazione fornito per le luci LED e le prese di corrente.
- Se qualche parte risulta mancante o danneggiata, non procedere con il montaggio. Contattare immediatamente l'assistenza clienti.
Contenuto della confezione
Before assembly, verify that all components listed below are present and undamaged. If anything is missing, please contact customer support.
| Parte | Descrizione | Quantità |
|---|---|---|
| Pannelli desktop | L-shaped main desktop surfaces | Vario |
| Componenti del telaio in acciaio | Legs, support bars, cross braces | Vario |
| Supporti per monitor | Elevated platforms for monitors | 2 |
| Scaffali portaoggetti | Mesh or solid shelves for storage | Vario |
| Unità multipresa | Integrated AC outlets and USB ports | 1 |
| Strisce luminose a LED | RGB lighting for desktop | Vario |
| Hardware di montaggio | Screws, bolts, Allen wrench, adjustable feet | Vario |
| Manuale di istruzioni | Questo documento | 1 |
Istruzioni di montaggio
Assembly typically requires two or more people due to the size and weight of the components. Follow the numbered steps carefully. Do not fully tighten screws until all parts are loosely assembled.
Fase 1: Disimballare e identificare le parti
Carefully unpack all components and lay them out on a soft, clean surface. Compare them with the package contents list to ensure everything is present.
Fase 2: assemblare il telaio
Attach the main support legs to the horizontal frame bars using the provided screws. Ensure the frame is stable. The L-shaped configuration can be reversed (left or right orientation) during this step, depending on your preference.
Passaggio 3: collegare i pannelli del desktop
Carefully place the desktop panels onto the assembled frame. Align the pre-drilled holes and secure the panels with the appropriate screws. Ensure the panels are flush and stable.
Step 4: Install Monitor Stands
Attach the two monitor stands to the designated areas on the desktop. These stands are designed to elevate your monitors for improved ergonomics, helping to reduce strain on your neck and shoulders.
Step 5: Install Storage Shelves
Mount the storage shelves to the frame as indicated in the detailed assembly diagram (refer to the included paper manual). The height of some shelves may be adjustable to accommodate different items, such as a PC tower, providing amplo spazio di archiviazione.
Step 6: Connect Power Strip and LED Lights
Integrate the power strip unit into its designated slot. Attach the LED light strips to the underside of the monitor stands or desktop edges as desired. Connect the LED lights and power strip to the main power source.
Fase 7: Serraggio e livellamento finali
Once all components are in place, fully tighten all screws. Adjust the leveling feet at the bottom of the desk legs to ensure the desk is stable and level on uneven floors.
Istruzioni per l'uso
Utilizzo delle prese di corrente integrate e delle porte USB
The desk is equipped with 2 AC power outlets (100-240V/15A) and 2 USB ports (5V-2A) for convenient charging of your devices. Simply plug your devices into the appropriate ports. Ensure the desk is connected to a wall outlet.
Controllo delle luci a LED
The integrated RGB LED lights offer 10 lighting modes and 10 color adjustment modes. Use the control button (usually located near the power strip) to cycle through the modes and colors. The lights have a memory function that retains the last selected mode when turned off and on again, allowing you to create an immersive atmosphere.
Manutenzione
- Pulizia: Pulisci la superficie della scrivania con un panno morbido eamp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the melamine finish.
- Fuoriuscite: Immediately wipe up any spills to prevent water damage or staining. The high-strength melamine laminated board is resistant to dirt, scratches, heat, and moisture.
- Elementi di fissaggio: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario per mantenere la stabilità.
- Componenti elettrici: Ensure the power cord and connections for the LED lights and outlets are not pinched or damaged. Disconnect power before cleaning electrical components.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La scrivania è traballante/instabile | Screws are loose; uneven floor | Tighten all assembly screws. Adjust the leveling feet on the bottom of the legs to compensate for uneven surfaces. |
| Le luci a LED non funzionano | Power not connected; faulty connection; damaged LED strip | Ensure the desk's power cord is plugged into a working wall outlet. Check all LED connections. If still not working, contact customer support. |
| Prese di corrente/porte USB non funzionanti | Desk not powered; circuit breaker tripped; faulty unit | Verify the desk is plugged in. Check your home's circuit breaker. Test with another device. If issue persists, contact customer support. |
| Le parti non si allineano durante il montaggio | Incorrect orientation; screws overtightened prematurely | Loosen all screws, re-align parts, then gradually tighten. Ensure correct orientation of L-shaped sections as shown in the assembly diagrams. |
Specifiche
- Modello: OKTB02013301002JP
- Marca: AODK
- Dimensioni (P x L x A): 102 cm x 150 cm x 76 cm (40.2 pollici x 59.1 pollici x 29.9 pollici)
- Peso: 24.7 kg (54.5 libbre)
- Forma: A forma di L
- Colore: Bianco
- Materiale del tavolo: High-strength melamine laminated board
- Materiale di base: Metal (Steel frame)
- Fine: Powder coating (base material)
- Weight Capacity (Desktop): 50 kg (110 libbre)
- Caratteristiche elettriche: 2x AC outlets (100-240V/15A), 2x USB ports (5V-2A)
- Illuminazione: RGB LED lights with 10 lighting modes and 10 color adjustment modes, memory function
- Caratteristiche aggiuntive: Monitor stand, Storage shelves, Adjustable leveling feet, Reversible L-shaped configuration
- Codice GTIN: 850064516760
Garanzia e supporto
For warranty information, missing parts, or technical support, please contact AODK customer service. Refer to your purchase documentation or the retailer's websito per dettagli di contatto specifici.
