Introduzione
L'informazioneamp Solar Flood Light is designed to provide efficient and reliable outdoor illumination with advanced motion sensing capabilities. This manual provides essential information for the proper installation, operation, and maintenance of your solar flood light to ensure optimal performance and longevity.
Key features include a 270° wide-angle illumination, dual motion sensors for enhanced detection, a high-capacity 4000mAh lithium iron phosphate battery, and three distinct operating modes. Its IP65 waterproof rating ensures durability in various weather conditions.
Immagine: Oltreview of the intelamp Outdoor Solar Wall Light highlighting its features.
Cosa c'è nella scatola
Si prega di controllare il contenuto della confezione per assicurarsi che siano presenti tutti gli articoli:
- informazioneamp Solar Flood Light Unit
- Viti di montaggio (2)
- Ancoraggi a muro (2)
- Zip Ties (1 large)
- Manuale di istruzioni
Specifiche
| Marca | informazioneamp |
| Nome del modello | YL002-13A-1P-MANMU |
| Modulo lampada | Proiettore |
| Fonte di alimentazione | Alimentato ad energia solare |
| Luminosità | 1300 lumen |
| Capacità della batteria | Litio ferro fosfato da 4000 mAh |
| Angolo di illuminazione | 270° |
| Campo di rilevamento del sensore di movimento | Up to 180°, Max 26ft |
| Livello di resistenza all'acqua | IP65 impermeabile |
| Materiale | Acrilonitrile Butadiene Stirene (ABS) |
| Dimensioni del prodotto | 9.44 cm L x 5.11 cm P x 1.41 cm A |
| Dimensioni del pannello solare | 9.4" x 4.3" |
| Temperatura del colore | 6500 gradi Celsius |
Installazione
For optimal performance, install the solar flood light in a location that receives direct sunlight for at least 5 hours daily. Ensure the solar panel is unobstructed.
Montaggio a parete
- Choose a suitable wall location that receives ampla luce del sole.
- Mark the drilling points using the light's mounting holes as a template. The hole spacing is approximately 3.5 inches.
- Praticare i fori e inserire i tasselli a muro.
- Align the light with the anchors and secure it with the provided screws.
- Regola la lamp heads and solar panel angle for desired lighting coverage and maximum sun exposure. The solar panel can be tilted up to 60°.
Image: Visual guide for wall installation, showing drilling points and securing the device.
Cable Tie Installation (for poles or fences)
- Identify the slots on the back of the solar light designed for zip ties.
- Thread the provided zip ties through these slots.
- Secure the light to a pole, tree trunk, or fence by tightening the zip ties.
- Adjust the light and solar panel angle as needed.
Image: Product dimensions and location of dual sensors for wider detection.
The recommended installation height is 13 feet for a maximum detecting distance of 26 feet.
Image: Recommended installation height and motion detection range.
Modalità operative
L'informazioneamp Solar Flood Light features a 'MODE' button to cycle through three distinct lighting modes and an off state. Press the button to switch between modes:
Image: Location and function of the 'MODE' button.
Mode 1: Dim-to-Bright Sensor Mode
In this mode, the light maintains a low brightness. When motion is detected, it switches to high brightness. After approximately 30 seconds of no motion, it returns to low brightness.
Image: Visual representation of Mode 1 operation.
Mode 2: Off-to-Bright Sensor Mode
The light remains off until motion is detected. Upon detection, it turns on at high brightness. After approximately 30 seconds of no motion, the light turns off completely.
Image: Visual representation of Mode 2 operation.
Mode 3: Constant Medium Brightness (Dusk-to-Dawn)
In this mode, the motion sensor is deactivated. The light provides a constant medium brightness throughout the night, from dusk until dawn or until the battery is depleted.
Image: Visual representation of Mode 3 operation.
Stato fuori
Pressing the 'MODE' button a fourth time will turn the light off. It will not automatically turn on until a mode is selected again.
Manutenzione
To ensure the longevity and optimal performance of your intelamp Solar Flood Light, follow these maintenance guidelines:
- Pulizia del pannello solare: Pulire regolarmente il pannello solare con un panno morbido e asciutto.amp panno per rimuovere polvere, sporco e detriti. Un pannello solare pulito garantisce la massima efficienza di ricarica.
- Ostacoli chiari: Periodically check that no trees, bushes, or other objects are obstructing the solar panel's exposure to direct sunlight.
- Cura della batteria: The integrated lithium iron phosphate battery is designed for long life. Avoid prolonged storage in extreme temperatures.
- Resistenza alle intemperie: The light is IP65 waterproof, providing protection against rain, snow, and frost. While designed for outdoor use, extreme weather conditions may temporarily affect performance.
Image: The solar light demonstrating IP65 weather resistance in various conditions.
Risoluzione dei problemi
If you encounter any issues with your intelamp Solar Flood Light, refer to the common problems and solutions below:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende di notte | Insufficient solar charge; light installed in a shaded area; 'MODE' button not pressed to activate a mode. | Ensure solar panel receives 5+ hours of direct sunlight daily. Relocate if necessary. Press the 'MODE' button to select an operating mode. |
| Light is dim or on for a short time | Insufficient solar charge; dirty solar panel; low battery. | Clean the solar panel. Ensure optimal sun exposure. Allow several days for full charge. |
| Il sensore di movimento non funziona | Sensor sensitivity too low; light installed too high; light in Mode 3 (motion sensor off). | Ensure light is installed at recommended height (around 13ft). Check that the light is not in Mode 3. |
| Luci lampeggianti | Batteria scarica. | Allow the solar panel to charge under direct sunlight for a full day. |
For further assistance, please refer to the detailed troubleshooting section in the included instruction booklet or contact customer support.
Garanzia e supporto
informazioneamp is committed to providing high-quality products and excellent customer service. If you encounter any problems or have technical questions regarding your solar flood light, please contact our customer support team. We value your feedback and are dedicated to ensuring your satisfaction.
Please retain your purchase receipt for any warranty claims. Specific warranty terms and conditions are detailed in the full instruction manual provided with your product.