Manuale utente della batteria Redodo Smart Bluetooth 12V 100Ah LiFePO4

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Redodo Smart Bluetooth 12V 100Ah LiFePO4 Battery. Please read this guide thoroughly before installation and use to ensure optimal performance and longevity of your battery.

The Redodo Smart Bluetooth LiFePO4 battery is designed for deep cycle applications, featuring an upgraded 100A BMS with low-temperature cut-off protection and Bluetooth 5.0 connectivity for remote monitoring and control. It is ideal for marine, boat, RV, and solar systems.

2. Informazioni sulla sicurezza

• Do not use this battery as a car battery, starter battery, or golf cart battery.
• We do not recommend using it to boot any device.
• Upon arrival, it is essential to charge the battery with a dedicated lithium iron phosphate charger that has a 0V capability for normal function.
• Assicurare una ventilazione adeguata durante la ricarica e il funzionamento.
• Evitare di cortocircuitare i terminali della batteria.
• Tenere la batteria lontana da fonti di calore e luce solare diretta.

3. Cosa c'è nella scatola

• 12.8V Bluetooth 100Ah LiFePO4 Battery with Low Temp Cut Off
• M8- 5/8" Terminal Bolts (2)
• Insulating Caps for Bolts (2)

4. Prodotto finitoview

Figure 1: Redodo Smart Bluetooth 12V 100Ah LiFePO4 Battery with app interface.

Caratteristiche principali:

• Smart Bluetooth App Monitoring: Built-in upgraded smart BMS with Bluetooth 5.0 module. Monitor battery voltage, current, power, and capacity via a smartphone app. Remote control for discharge or power off within 10 meters.
• Protezione da interruzione a bassa temperatura: Automatically cuts off charging below 0°C and restores above 5°C. Discharging is cut off below -20°C.
• Upgraded BMS for Trolling Motors: Enhanced protection against humidity, salt spray, and corrosion, specifically designed for marine environments.
• Design leggero: Weighs approximately 22.6 lbs, significantly lighter than traditional lead-acid batteries.
• Ciclo di vita lungo: Offers 4000+ deep cycles at 100% DOD (15000 cycles at 60% DOD) and a 10-year service life.
• Espandibile: Supports up to 4P4S configuration for a 48V (51.2V) 400Ah battery bank, providing up to 20.48 kWh energy.

5. Configurazione e installazione

5.1 Disimballaggio e ispezione iniziale

Carefully remove the battery and accessories from the packaging. Inspect for any visible damage. Ensure all components listed in the 'What's in the Box' section are present.

5.2 Collegamento terminale

Connect your M8 terminal bolts to the battery terminals. Ensure a secure connection. Use the provided insulating caps for safety.

5.3 Carica iniziale

Before first use, fully charge the battery with a dedicated lithium iron phosphate charger that has a 0V capability.

5.4 Configurazione dell'app Bluetooth

Download the Redodo Smart Bluetooth app from your smartphone's app store. Scan the QR code on the battery or manually search for the device to connect. The app allows you to monitor battery status and control certain functions.

5.5 Power Expansion (Optional)

The Redodo battery supports expansion up to 4P4S (4 in parallel, 4 in series) to create a 48V (51.2V) 400Ah battery bank. Consult a qualified technician for complex wiring configurations.

6. Istruzioni per l'uso

6.1 Monitoring with Bluetooth App

Once connected via Bluetooth, the app provides real-time data including:

• Stato di carica (SOC)
• Voltage
• Corrente (carica/scarica)
• Potenza (watt)
• Temperatura della batteria
• Available Time for Discharge

The app also allows you to remotely manage discharge functions and power off the battery.

Figure 2: Screenshot of the Bluetooth app interface showing battery status.

Figure 3: Remote control of battery discharge and power-off functions through the app.

6.2 Protezione dalle basse temperature

The integrated BMS automatically manages charging and discharging based on temperature to protect the battery:

• Charging is cut off below 0°C (32°F) and restored above 5°C (41°F).
• Discharging is cut off below -20°C (-4°F).

Figure 4: Diagram illustrating low temperature cut-off and recovery thresholds.

6.3 Recommended Charging Methods

La batteria può essere caricata utilizzando diversi metodi:

• Dedicated LiFePO4 Charger (e.g., 12V/14.6V 20A)
• Solar Panels (with suitable MPPT controller, e.g., >400W)
• Generator (with 20A AC-DC charger)
• Alternator (with 20A DC-DC charger)

Figure 5: Visual guide to various recommended charging methods for the battery.

7. Manutenzione

• Controllare regolarmente la tenuta e la corrosione dei collegamenti dei terminali.
• Mantenere la batteria pulita e asciutta.
• Conservare la batteria in un luogo fresco e asciutto quando non viene utilizzata.
• Avoid prolonged storage at 0% State of Charge (SOC).

8. Risoluzione Dei Problemi

Se riscontri problemi con la batteria, fai riferimento alle seguenti soluzioni comuni:

• La batteria non si carica: Ensure the charger is a dedicated LiFePO4 charger with 0V capability. Check all connections. Verify the ambient temperature is above 0°C.
• La batteria non si scarica: Check if the battery is in low-temperature cut-off mode (below -20°C). Ensure the BMS has not triggered any protection (e.g., over-discharge).
• Problemi di connettività Bluetooth: Ensure your device is within 10 meters of the battery. Restart the app and try reconnecting.
• Prestazioni ridotte: Check the battery's SOC via the app. Ensure proper charging cycles are being followed.

For further assistance, contact Redodo customer support.

9. Specifiche

10. Garanzia e supporto

The Redodo Smart Bluetooth 12V 100Ah LiFePO4 Battery comes with a Garanzia di 5 anni and is designed for a Durata di vita utile di 10 anni. For any inquiries or support, please refer to the contact information provided in your product packaging or visit the official Redodo websito.