Giradischi audiofilo Pro-Ject Debut EVO 2

1.1 Unboxing e componenti

Carefully unpack all items from the box. Ensure all components are present before proceeding with assembly.

• Unità giradischi
• Transparent Dustcover
• Cavo di collegamento
• Adattatore di alimentazione universale
• Goniometro di allineamento
• Adattatore singolo

Davanti view of the Pro-Ject Debut EVO 2 turntable.

1.2 Installazione del piatto e della cinghia

1. Carefully place the heavy aluminum platter onto the spindle in the center of the turntable.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and around the motor pulley.
3. Rotate the platter manually a few times clockwise to ensure the belt is properly seated.

Image showing the platter with the drive belt correctly installed around the motor pulley.

1.3 Montaggio del braccio

1. Far scorrere il contrappeso sul retro del braccio.
2. Attach the pre-mounted Pick it MM EVO cartridge to the tonearm headshell.

Dettagliato view of the carbon fiber tonearm and the pre-mounted Pick it MM EVO cartridge.

Diagram illustrating the TPE counterweight and premium bearing block for the tonearm.

1.4 Installazione del parapolvere

Carefully insert the hinges of the transparent dustcover into the corresponding slots on the turntable base.

The Pro-Ject Debut EVO 2 turntable with its transparent dustcover in place.

1.5 Livellamento del giradischi

Place the turntable on a stable, level surface. Use a bubble level (not included) to ensure the turntable is perfectly horizontal. Adjust the turntable's feet as necessary to achieve a level position.

1.6 Bilanciamento del braccio

This critical step ensures proper tracking force and prevents damage to your records and stylus. Follow the detailed instructions in the included manual for precise tonearm balancing and anti-skating adjustment.

Detail of the tonearm showing the anti-skating mechanism.

1.7 Collegamento a un sistema audio

Collega il giradischi al tuo amplifier or receiver using the provided connection cable. Ensure your amplifier has a phono input, or use an external phono preamplifier if necessary. Connect the ground wire to the ground terminal on your amplificatore/preamp to minimize hum.

Video: Fluance Reference Turntable First Time Setup. This video provides a general guide for turntable setup, including platter, belt, tonearm, and dust cover installation, as well as leveling and balancing.

Video: How to Connect a Fluance Turntable to a Stereo Amplifier. This video offers a general guide on connecting a turntable to an amplifier, which can be helpful for the Pro-Ject Debut EVO 2.

2.1 Accensione/spegnimento e selezione della velocità

To power on the turntable, rotate the power knob. The Debut EVO 2 features electronic speed selection for 33 and 45 RPM. Use the dedicated button to switch between these speeds. For 78 RPM records, a special stylus and pulley may be required (sold separately).

2.2 Riproduzione di un disco

1. Metti il ​​tuo disco sul piatto.
2. Select the correct playback speed (33 or 45 RPM).
3. Sollevare delicatamente il braccio utilizzando la leva di regolazione.
4. Posizionare il braccio sulla traccia desiderata del disco.
5. Slowly lower the cueing lever to allow the stylus to descend onto the record groove.
6. At the end of the record, lift the tonearm using the cueing lever and return it to its rest.

3.1 Pulizia

• Regularly clean the dustcover and turntable plinth with a soft, dry cloth.
• Use a carbon fiber brush to gently clean your records before each play to remove dust and static.
• Clean the stylus carefully with a dedicated stylus brush, moving from back to front.

3.2 Cura dello stilo

The stylus is a delicate component. Avoid touching it with your fingers. Replace the stylus when signs of wear appear, typically after 500-1000 hours of playback, to maintain sound quality and prevent record damage.

4.1 Nessun suono

• Check all cable connections between the turntable, preamplifier (if used), and amplificatore/ricevitore.
• Assicurati che sia selezionato l'input corretto sul tuo amplificatore/ricevitore.
• Verify the stylus is properly seated in the cartridge and the tonearm is balanced.

4.2 Skipping or Distortion

• Assicurarsi che il giradischi sia posizionato su una superficie stabile e piana.
• Re-check tonearm balance and anti-skating settings.
• Pulisci il disco e lo stilo.
• Controllare che lo stilo non sia danneggiato o usurato.

4.3 Ronzio

• Assicurarsi che il filo di terra sia collegato saldamente tra il giradischi e il amplificatore/preamp.
• Check for any loose connections in the audio cables.
• Allontanare il giradischi da altri dispositivi elettronici che potrebbero causare interferenze.

6.1 Disponibilità dei pezzi di ricambio

Pro-Ject offers a 25-year spare parts availability guarantee for this turntable, ensuring its longevity and continued performance.

6.2 Assistenza clienti

For further assistance, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Pro-Ject Audio Systems websito.