Pro-Ject Debut PRO B Balanced Turntable

1. Introduzione

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Debut PRO B Balanced Turntable. Please read these instructions carefully before using the product to ensure optimal performance and longevity. The Pro-Ject Debut PRO B is engineered for high-fidelity audio reproduction, featuring a carbon fiber tonearm, a precision-machined aluminum platter, and a pre-mounted Pick it PRO Balanced cartridge for exceptional sound quality.

Figure 1: Pro-Ject Debut PRO B Turntable with its dust cover open, showcasing il piatto e il braccio.

2. Istruzioni di sicurezza

• Always disconnect the turntable from the power supply before cleaning or maintenance.
• Tenere il giradischi lontano da acqua, umidità e luce solare diretta.
• Do not place heavy objects on the turntable.
• Ensure the turntable is placed on a stable, level surface to prevent vibrations and ensure proper operation.
• Avoid touching the stylus with bare hands to prevent damage.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• Pro-Ject Debut PRO B Turntable Unit
• Piatto in alluminio
• Cintura di sicurezza
• Copertura antipolvere con cerniere
• Contrappeso
• Peso anti-skating
• Alimentazione elettrica
• Connect it E RCA Cable
• Stilo Manometro
• Manuale d'uso

4. Impostazione

Follow these steps to set up your Pro-Ject Debut PRO B turntable:

4.1. Installazione del piatto e della cinghia di trasmissione

1. Carefully place the aluminum platter onto the spindle in the center of the turntable.
2. Locate the drive belt. Gently stretch the drive belt around the motor pulley and the sub-platter rim. Ensure the belt is seated correctly and not twisted.
3. Rotate the platter manually a few times clockwise to ensure the belt is properly aligned.

Figura 2: primo piano view of the turntable platter and drive belt mechanism.

4.2. Configurazione del braccio e della testina

The Pick it PRO Balanced cartridge is pre-mounted on the carbon fiber tonearm. You will need to install the counterweight and set the tracking force.

1. Slide the counterweight onto the rear end of the tonearm with the numbers facing forward.
2. Unlock the tonearm from its rest. Carefully remove the stylus protector from the cartridge.
3. Adjust the counterweight by rotating it until the tonearm is balanced and floats horizontally when released.
4. Una volta bilanciato, tenere fermo il contrappeso e ruotare solo l'anello numerato fino a raggiungere la posizione '0'.
5. Then, rotate the entire counterweight (including the numbered ring) to set the recommended tracking force for the Pick it PRO Balanced cartridge (typically 1.8g). Use the supplied stylus pressure gauge for precise adjustment.
6. Install the anti-skating weight by looping the thread over the anti-skating stub and through the appropriate groove (usually the second groove for 1.8g tracking force).

Figura 3: dettagliata view of the tonearm and counterweight for adjustment.

Figure 4: The Pick it PRO Balanced cartridge attached to the tonearm.

4.3. Livellamento del giradischi

Ensure the turntable is perfectly level for optimal performance. Use a spirit level (not included) or the adjustable feet to achieve this.

Video 1: This video demonstrates the initial setup steps for a turntable, including platter installation, counterweight adjustment, and leveling. While featuring a Fluance turntable, the principles apply to the Pro-Ject Debut PRO B.

4.4. Connessione a un Amplificatore/ricevitore

The Debut PRO B features a true balanced connection. Connect the supplied RCA cable from the turntable's audio output to your amplificatore o ricevitore. Se tuo amplifier has a dedicated 'PHONO' input, use it. If not, you will need an external phono preamppiù vivace.

Figura 5: Posteriore view of the turntable, highlighting the RCA output and grounding terminal.

Video 2: This video illustrates how to connect a turntable to a stereo amplifier, covering both direct phono input and external preamp scenarios. The connection principles are applicable to the Pro-Ject Debut PRO B.

5. Istruzioni per l'uso

5.1. Accensione/Spegnimento

Connect the power supply to the turntable and a wall outlet. The turntable is ready for operation when the power indicator light is on.

5.2. Selezione della velocità

Use the speed selector switch located on the plinth to choose between 33 RPM and 45 RPM, corresponding to your record's playback speed.

5.3. Riproduzione di un disco

1. Metti un disco sul piatto.
2. Sbloccare il braccio dal suo supporto.
3. Lift the cueing lever to raise the tonearm.
4. Posizionare con attenzione il braccio sulla traccia desiderata del disco.
5. Abbassare la leva di avanzamento per far cadere delicatamente la puntina sul disco.

5.4. Interruzione della riproduzione

1. Lift the cueing lever to raise the tonearm from the record.
2. Rimettere il braccio nella sua posizione di appoggio e fissarlo con la clip del braccio.
3. Turn off the turntable using the speed selector switch.

6. Manutenzione

6.1. Pulizia dello stilo

Use a soft brush designed for stylus cleaning. Brush gently from back to front (in the direction of play) to remove dust and debris.

6.2. Pulizia dei registri

Use a carbon fiber record brush before each play to remove surface dust. For deeper cleaning, use a record cleaning solution and cloth.

6.3. Pulizia del giradischi

Wipe the turntable plinth and platter with a soft, dry, anti-static cloth. Avoid using harsh chemicals or abrasive materials.

6.4. Cura della copertura antipolvere

Pulisci il coperchio antipolvere con un panno morbido eamp cloth. Do not use window cleaning fluids or abrasive cloths as they may scratch the surface.

7. Risoluzione Dei Problemi

In caso di problemi, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

• Senza energia: Controllare il collegamento del cavo di alimentazione e la presa a muro.
• No sound from one or both channels: Verify RCA cable connections to both turntable and amplifier. Check cartridge wiring.
• Distorted or inconsistent sound: Ensure tracking force and anti-skating are correctly set. Check for stylus wear or damage.
• Ronzio: Ensure the ground wire is properly connected between the turntable and amplifier. Check for proximity to other electronic devices.
• Velocità errata: Verify the drive belt is correctly installed and not stretched. Ensure the speed selector is set to the correct RPM.

8. Specifiche

9. Garanzia e supporto

Your Pro-Ject Debut PRO B turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or spare parts, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems website. EU spare part availability duration is 25 years.