Manuale utente del modulo relè a 2 canali Tuya Smart WiFi DieseRC TY-2CH 1.0

1. Prodotto finitoview

The DieseRC TY-2CH 1.0 is a versatile 2-channel smart relay module that integrates both WiFi and RF 433MHz wireless control capabilities. It allows users to remotely control various electrical devices via a smartphone application (Tuya or Smart Life) or the included RF remote controls. This module supports multiple power input options and offers passive output (dry contacts) for broad compatibility with different systems.

Contenuto della confezione:

• 1 x DieseRC TY-2CH 1.0 Smart Relay Module
• 2 telecomandi RF
• 1 x Manuale utente (questo documento)

Image 1: The DieseRC TY-2CH 1.0 Smart Relay Module and its two accompanying RF remote controls.

2. Specifiche

3. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo dispositivo. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

• Sicurezza elettrica: All wiring should be performed by a qualified electrician or in accordance with local electrical codes. Ensure the power supply is disconnected before any installation or maintenance.
• Voltage Compatibilità: Verificare che il volume di ingressotage of the module matches your power source and that the connected load's voltage and current do not exceed the module's specifications.
• Solo per uso interno: This device is designed for indoor use in dry environments. Avoid exposure to moisture, extreme temperatures, or corrosive substances.
• Protezione da sovraccarico: Do not exceed the maximum load current of 10A or power of 480W. Overloading can damage the device and pose a fire risk.
• Bambini e animali domestici: Tenere il dispositivo e i suoi componenti fuori dalla portata dei bambini e degli animali domestici.

4. Installazione e cablaggio

The module offers flexible power input and output options. Always ensure power is disconnected before wiring.

4.1 Opzioni di alimentazione

The module can be powered via three methods:

• USB-C 5V: Connect a standard USB-C 5V power adapter (0.5A minimum) to the USB-C port.
• DC 7V~48V: Connect a DC power source within this range to the VIN and GND terminals.
• AC 7V~32V: Connect an AC power source within this range to the VIN and GND terminals.

Image 2: The module supports both USB 5V and DC 7-48V power inputs.

4.2 Connecting Loads (Passive Output)

The module provides two independent relay channels (Channel 1 and Channel 2), each with Normally Open (NO), Common (COM), and Normally Closed (NC) terminals. These are dry contacts, meaning they do not supply power to the load directly but act as a switch in the load's circuit.

Principio generale di cablaggio: Connect the power supply for your load to one side of the load, and the other side of the load to the COM terminal of the relay. Then, connect the NO terminal of the relay to the other side of the load's power supply (or ground, depending on your circuit). When the relay is activated, it will complete the circuit between COM and NO.

Image 3: Various wiring configurations for AC motors, DC motors, and general loads (1V-250V) with the module.

ExampApplicazione: Apriporta da garage

The module can be used to control a garage door opener. Connect the module's relay output (e.g., COM1 and NO1) to the wall button/console terminals of your garage door opener. This simulates pressing the button, allowing remote control via the app or RF remote.

Image 4: The smart relay module connected to a garage door opener for remote operation.

5. Modalità operative

The module supports two primary operating modes, which can be configured via the app:

• Modalità di commutazione: Each press of the button (or app command) toggles the relay state. Press once to turn ON, press again to turn OFF. This is suitable for lights or devices that need to stay ON/OFF.
• Inching (Momentary) Mode: The relay turns ON for a set duration (e.g., 1-2 seconds) after a button press or app command, then automatically turns OFF. This is ideal for momentary actions like garage door openers, electric locks, or pulse switches. The duration can be set in the app.

6. Telecomando RF

The module comes with two 433MHz RF remote controls for local operation. Up to 20 RF remotes can be paired with the module.

6.1 Pairing an RF Remote

1. Assicurarsi che il modulo sia acceso.
2. Press the pairing button on the module due volte quickly. The blue LED indicator will flash.
3. Within 3 seconds, press the desired button (A or B) on the RF remote control.
4. The blue LED will stop flashing and remain solid for a moment, indicating successful pairing.
5. Test the remote control to ensure it operates the connected device.

6.2 Deleting Paired RF Remotes

To clear all paired RF remotes from the module:

1. Assicurarsi che il modulo sia acceso.
2. Press the pairing button on the module otto volte velocemente.
3. The blue LED indicator will flash rapidly and then turn off, indicating that all paired RF remotes have been deleted.

Note: This action will remove all RF remote pairings. Individual remote deletion is not supported.

7. Tuya/Smart Life App Setup

The module is compatible with the Tuya Smart and Smart Life applications, available for Android and iOS devices.

7.1 Download e registrazione dell'app

1. Download the "Tuya Smart" or "Smart Life" app from your device's app store (Google Play Store for Android, Apple App Store for iOS).
2. Apri l'app e registrati per un nuovo account oppure accedi con uno esistente.

7.2 Aggiunta del dispositivo

1. Assicurati che il Wi-Fi e il Bluetooth del tuo smartphone siano abilitati.
2. Power on the DieseRC TY-2CH 1.0 module.
3. Reset the module to pairing mode: Press and hold the pairing button on the module for approximately 5 seconds until the blue LED indicator starts flashing rapidly. If the LED is not flashing rapidly, repeat this step.
4. Open the Tuya Smart or Smart Life app. The app should automatically detect the new device and prompt you to add it. If not, tap the "+" icon in the top right corner and select "Add Device" or "Auto Scan."
5. Follow the on-screen instructions to connect the module to your 2.4 GHz Wi-Fi network. You will need to enter your Wi-Fi password.
6. Una volta connesso, puoi rinominare il dispositivo e assegnarlo a una stanza.

8. App Features and Control

Once the module is successfully added to the app, you can access various smart control features:

8.1 Remote On/Off Control

From the device interface in the app, you can individually switch Channel 1 and Channel 2 ON or OFF from anywhere with an internet connection.

Image 5: The app allows remote control of connected devices over Wi-Fi, eliminating distance limitations.

8.2 Pianificazione e timer

L'app consente di impostare diverse funzioni di temporizzazione:

• Conto alla rovescia: Imposta un timer per l'accensione o lo spegnimento del dispositivo dopo un periodo di tempo specificato.
• Programma: Create daily or weekly schedules for the device to turn ON/OFF at specific times.
• Casuale: Automate ON/OFF times within a random range to simulate occupancy.
• Inching: Configure the momentary ON duration for each channel (e.g., 1-2 seconds).

Image 6: The app provides options for setting up timing, scheduling, and countdown functions for connected devices.

8.3 Integrazione del controllo vocale

The module is compatible with Amazon Alexa and Google Home. Link your Tuya Smart/Smart Life account to your voice assistant app to enable voice commands.

Exampi comandi vocali:

• "Alexa, accendi la luce."
• "Hey Google, open the garage."

Image 7: The module supports voice control through popular platforms like Amazon Alexa and Google Assistant.

8.4 Condivisione del controllo

You can share control of the smart module with other family members through the Tuya Smart or Smart Life app, allowing multiple users to manage the connected devices.

9. Risoluzione Dei Problemi

• Dispositivo offline nell'app:
  1. Check if the module is powered on.
  2. Verify your Wi-Fi network is active and the module is within range.
  3. Ensure your Wi-Fi network is 2.4 GHz. The module does not support 5 GHz Wi-Fi.
  4. Try resetting the module to pairing mode (hold button for 5 seconds) and re-adding it to the app.
• Telecomando RF non funzionante:
  1. Ensure the module is powered on.
  2. Check if the remote control's battery is functional.
  3. Re-pair the RF remote with the module as described in Section 6.1.
• Il dispositivo non risponde ai comandi:
  1. Check all wiring connections to ensure they are secure and correct.
  2. Verify that the connected load is within the module's maximum current and power specifications.
  3. If using the app, check your internet connection. If using the RF remote, ensure it is paired and within range.
• Comportamento dell'indicatore LED:
  
  • Rapidly flashing blue LED: Modalità di associazione.
  • LED blu fisso: Connected to Wi-Fi and operational.
  • No blue LED: Not powered or not connected to Wi-Fi.

10. Manutenzione

To ensure optimal performance and longevity of your DieseRC TY-2CH 1.0 module:

• Mantenere il dispositivo pulito e privo di polvere. Per la pulizia, utilizzare un panno asciutto e morbido.
• Evitare di esporre il modulo alla luce solare diretta, a umidità elevata o a temperature estreme.
• Controllare regolarmente i collegamenti dei cavi per individuare eventuali segni di usura o allentamento.
• Ensure the firmware of the module is updated via the Tuya Smart/Smart Life app when updates are available.

11. Garanzia e supporto

For warranty information and technical support, please refer to the product packaging or contact DieseRC customer service directly. You can typically find contact details on the manufacturer's official websito o tramite la tua piattaforma di acquisto.