LEZYNE Strip Drive 150 Lumens Rear Bicycle Light User Manual

1. Introduzione

The LEZYNE Strip Drive 150 Lumens Rear Bicycle Light is designed to enhance cycling safety with its powerful illumination and versatile features. This manual provides essential information for the proper setup, operation, and maintenance of your new bicycle light.

Figure 1: LEZYNE Strip Drive 150 Lumens Rear Bicycle Light

2. Caratteristiche del prodotto

• Visibilità superiore: Designed for optimal light dispersion with wide-angle optics offering 270-degrees of visibility.
• Costruzione durevole: Built to withstand various weather conditions, tested to IPX7 Waterproofing standards. Features a lightweight yet durable co-molded design.
• Montaggio versatile: Equipped with a silicone rubber mounting strap that attaches to both aero and round seatposts.
• Molteplici modalità di illuminazione: Delivers up to 150 lumens of brightness through its 5 LEDs. Offers 11 light modes, including Blast, Enduro, Economy, Flash 1-6, Day Flash 1, and Day Flash 2.
• Ricaricabile: Conveniently rechargeable via a Micro USB port (cable included).
• Design compatto: Weighs just 54g with dimensions of 79.3mm x 36mm x 35.8mm.

3. Impostazione

3.1. Montaggio

The Strip Drive light comes with a versatile silicone rubber strap for secure attachment to your bicycle's seatpost. It is compatible with both aero and round seatposts.

1. Position the light on your seatpost with the LEDs facing backward.
2. Wrap the silicone strap around the seatpost and hook it onto the designated tab on the light body. Ensure a snug fit to prevent movement during rides.

Figure 2: Light mounted on a seatpost

Figura 3: lato view of light on a bicycle

3.2. Ricarica

The Strip Drive light is equipped with a Micro USB port for convenient recharging. A Micro USB cable is included with your purchase.

1. Locate the Micro USB port on the light, typically covered by a rubber flap to protect against water and dust.
2. Aprire delicatamente la linguetta di gomma.
3. Connect the Micro USB cable to the light's port and the other end to a powered USB source (e.g., computer, wall adapter).
4. The battery indicator LED will show charging status (refer to Section 4.3 for details).
5. Once fully charged, disconnect the cable and securely close the rubber flap to maintain IPX7 waterproofing.

Figura 4: Fronte view della luce

Figura 5: Posteriore view della luce

4. Istruzioni per l'uso

4.1. Accensione/spegnimento

• Per accendere la luce ON, press and hold the power button located on the top of the light for approximately 2 seconds.
• Per accendere la luce SPENTO, tenere premuto il pulsante di accensione per circa 2 secondi.

4.2. Selezione della modalità

Once the light is on, short press the power button to cycle through the 11 available light modes. The light will remember the last selected mode when turned off and on again.

Figure 6: LEZYNE Strip Drive light in operation

Figure 7: Enhanced visibility with the light at night

4.3. Indicatore della batteria

The integrated LED indicator provides a general idea of the battery charge level:

• Luce verde: 100-75% di carica
• Green and Red Light: 75-25% di carica
• Luce rossa: 25-0% di carica (ricaricare presto)

5. Manutenzione

• Pulizia: Pulisci la luce con la pubblicitàamp panno per rimuovere sporco e detriti. Evitare l'uso di prodotti chimici aggressivi o materiali abrasivi.
• Ricarica: For optimal battery life, charge the light regularly, especially after long rides or when the battery indicator shows low charge. Do not store the light with a completely depleted battery for extended periods.
• Magazzinaggio: Quando non viene utilizzata, conservare la lampada in un luogo fresco e asciutto, lontano dalla luce solare diretta.
• Impermeabilizzazione: Ensure the Micro USB port's rubber flap is securely closed at all times when not charging to maintain its IPX7 water resistance.

6. Risoluzione Dei Problemi

• La luce non si accende: Assicurarsi che la batteria sia carica. Collegare il dispositivo a una fonte di alimentazione USB e controllare l'indicatore di carica.
• La luce non si carica: Verify the USB cable is properly connected to both the light and the power source. Try a different USB cable or power source. Ensure the charging port is clean and free of debris.
• Light not staying securely mounted: Re-adjust the silicone strap for a tighter fit around the seatpost. Ensure the strap is correctly hooked.
• Tempo di esecuzione ridotto: Battery capacity may decrease over time with repeated charging cycles. Ensure the light is fully charged before each use.

7. Specifiche

8. Video ufficiale del prodotto

9. Garanzia e supporto

For warranty information and customer support, please refer to the official LEZYNE website or contact your retailer. Product protection plans may be available for purchase separately.

Visitare il Negozio LEZYNE su Amazon per ulteriori prodotti e informazioni.