Manuale utente della batteria Bluetooth Redodo 12V 100Ah LiFePO4

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Redodo 12V 100Ah LiFePO4 Bluetooth Battery. Designed for deep cycle applications, this battery is ideal for marine, RV, solar, and off-grid power systems. Please read this manual thoroughly before use and retain it for future reference.

Image: The Redodo 12V 100Ah LiFePO4 Bluetooth Battery, showcasingrazie al suo design compatto e alle maniglie integrate.

2. Informazioni sulla sicurezza

Importanti precauzioni di sicurezza:

• Quando si maneggiano le batterie, indossare sempre dispositivi di protezione individuale (DPI) adeguati.
• Non cortocircuitare i terminali della batteria.
• Assicurare una ventilazione adeguata durante la carica e la scarica.
• Non esporre la batteria al fuoco o al calore estremo.
• Evitare di far cadere o danneggiare fisicamente la batteria.
• Use only LiFePO4 compatible chargers.
• Do not connect batteries with different chemistries or voltages in series/parallel.
• Tenere la batteria lontano dalla portata dei bambini e degli animali domestici.
• In caso di incendio, utilizzare un estintore di classe D. L'acqua può aggravare gli incendi causati dal litio.

Protezione a bassa temperatura: This battery features a built-in low-temperature protection system. It automatically stops charging below 32°F (0°C) and resumes above 41°F (5°C). Discharge halts at -4°F (-20°C). This ensures safe operation and prevents damage in freezing climates.

3. Cosa c'è nella scatola

• Redodo 12.8V 100Ah LiFePO4 Battery with Low Temp Cut Off
• Manuale d'uso
• Terminal Bolts (M8)

4. Caratteristiche principali

• Built-in Low-Temperature Protection: Automatically stops charging below 32°F (0°C) and resumes above 41°F (5°C). Discharge halts at -4°F (-20°C).
• Compact Group 24 Design: Standard BCI Group 24 case for easy drop-in replacement in RVs, boats, and campERS.
• Monitoraggio APP Bluetooth: Monitoraggio in tempo reale del volumetage, current, capacity, and discharge control via Redodo App and Bluetooth 5.0 (up to 10 meters).
• Design leggero: Weighs only 22.16 lbs, approximately one-third the weight of comparable AGM batteries.
• Enhanced BMS Protection: Rugged, upgraded Battery Management System (BMS) offers waterproof, salt-spray, and corrosion protection, along with comprehensive safety features (precharge, low/high temp, overcharge/over-discharge, short circuit, overcurrent, auto-recovery from overloads).
• Expandable for Versatile Power: Connect up to four 12V 100Ah LiFePO4 batteries in series (up to 48V) or parallel (up to 400Ah).
• Long 10-Year Lifespan: Built with Grade A cells, delivering 4000+ cycles at 100% Depth of Discharge (DoD).

Image: A Redodo battery with a smartphone displaying the real-time battery status monitoring app, showing remaining usage time, SOC, voltage, current, and remote control options.

5. Istruzioni per l'installazione

1. Disimballaggio: Rimuovere con cautela la batteria e tutti gli accessori dalla confezione. Verificare la presenza di eventuali danni visibili.
2. Carica iniziale: Si consiglia di caricare completamente la batteria prima del primo utilizzo. Utilizzare un caricabatterie LiFePO4 compatibile.
3. Collegamento terminale:
   • Assicurarsi che tutti i collegamenti siano puliti e privi di corrosione.
   • Connect the positive (+) terminal of the battery to the positive (+) terminal of your system using appropriate gauge cables.
   • Connect the negative (-) terminal of the battery to the negative (-) terminal of your system.
   • Tighten all terminal connections securely using the provided M8 bolts and washers.
4. App Installation (for Bluetooth Monitoring):
   • Download the "Redodo App" from your smartphone's app store (Google Play or Apple App Store).
   • Abilita il Bluetooth sul tuo smartphone.
   • Open the Redodo App and follow the on-screen instructions to pair with your battery. You may need to scan a QR code on the battery or manually select it from a list of nearby devices.

Image: A person lifting the lightweight Redodo battery using its integrated handles, highlighting its portability.

6. Istruzioni per l'uso

Your Redodo LiFePO4 battery is designed for deep cycle applications. It can power various devices and systems in RVs, boats, solar setups, and off-grid power systems.

• Dispositivi di alimentazione: Connect your 12V devices or inverter to the battery terminals. Ensure the total current draw does not exceed the battery's maximum continuous discharge current (100A).
• Funzionamento a bassa temperatura: The built-in BMS will automatically manage charging and discharging based on temperature to prevent damage. No user intervention is required for this feature.
• Remote Control (via App): Use the Redodo App to monitor battery status and, if supported, control discharge or power-off functions remotely.

Image: A Redodo battery in an outdoor setting, with a smartphone displaying the app's capacity monitoring feature, ensuring users always know how much power is left.

7. Carica della batteria

Use a dedicated LiFePO4 battery charger with a recommended charging voltage between 14.2V to 14.6V. The recommended charging current is 0.2C (20A for a 100Ah battery) for standard charging, or up to 1C (100A) for fast charging. The battery will reach its full capacity of 100% after approximately 5 hours of charging at 0.2C.

• Caricabatterie CA: Connect a compatible LiFePO4 AC charger to the battery terminals.
• Ricarica solare: Connect the battery to a solar charge controller (LiFePO4 compatible) and then to solar panels.
• Alternator/Generator Charging: If your alternator or generator supports DC output, it may be used to charge the battery. Consult your vehicle's manual or a qualified technician for proper setup.

8. Bluetooth App Monitoring

The Redodo App provides comprehensive real-time data and control over your battery. Ensure your phone is within 10 meters (33 feet) of the battery for optimal Bluetooth connection.

• Stato in tempo reale: View volumetage, current, power, state of charge (SOC), and remaining capacity.
• Conteggio ciclico: Track the number of charge/discharge cycles.
• Temperatura: Monitor the internal temperature of the battery.
• Telecomando: Manage discharge and power-off functions directly from the app.
• Alarms & Protection: Receive alerts for various protection states (e.g., over-voltage, sotto-volumetage, over-current).

Image: Screenshot of the Redodo App interface, illustrating real-time battery status, including SOC, voltage, corrente e capacità.

9. Collegamento in serie e in parallelo

The Redodo 12V 100Ah LiFePO4 battery supports connections of up to four batteries in series or parallel to achieve higher voltage or capacity configurations.

• Collegamento in serie: Connect up to four batteries in series to increase the voltage (e.g., two 12V batteries in series create a 24V system). Ensure all batteries are of the same model and capacity.
• Connessione parallela: Connect up to four batteries in parallel to increase the total capacity (e.g., two 12V 100Ah batteries in parallel create a 12V 200Ah system). Ensure all batteries are of the same model and capacity.
• Bilanciamento: Before connecting multiple batteries, ensure they are fully charged and balanced to minimize voltage differenze.

Image: An illustration showing multiple Redodo batteries connected in a solar power setup, demonstrating their expandability for versatile power solutions.

10. Manutenzione

• Ispezione regolare: Periodically check battery terminals for cleanliness and tightness.
• Pulizia: Keep the battery clean and dry. Use a dry cloth to wipe the battery case.
• Magazzinaggio: For long-term storage, charge the battery to 50-70% SOC and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
• Evitare scariche profonde: While the battery can handle 100% DoD, avoiding frequent deep discharges can extend its overall lifespan.

11. Risoluzione Dei Problemi

Se riscontri problemi con la batteria, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

• Batteria non in carica:
  • Check charger compatibility: Ensure you are using a LiFePO4 compatible charger.
  • Verify connections: Make sure all cables are securely connected and polarity is correct.
  • Check temperature: If below 32°F (0°C), the battery will not charge due to low-temperature protection.
  • BMS tripped: If the battery has been deeply discharged (0V), use a low-power charger (2-5A) for a few minutes to activate the BMS.
• Batteria non scarica:
  • Check load: Ensure the load is within the battery's specifications (max continuous discharge 100A).
  • Verify connections: Ensure all cables are securely connected.
  • Check temperature: If below -4°F (-20°C), the battery will not discharge due to low-temperature protection.
  • BMS tripped: The BMS may have tripped due to over-current, over-voltage, o sotto-volumetage. Disconnect the load, wait 30 seconds for auto-recovery, and then reconnect.
• Problemi di connettività dell'app Bluetooth:
  • Assicurati che il Bluetooth sia abilitato sul tuo telefono.
  • Make sure your phone is within 10 meters (33 feet) of the battery.
  • Riavvia l'app o il telefono.

12. Specifiche tecniche

13. Garanzia e assistenza clienti

Redodo offers a Garanzia di 5 anni on this LiFePO4 battery. For any questions, technical assistance, or warranty claims, please contact our dedicated customer support team.

• Assistenza clienti: Our team provides round-the-clock one-on-one support to ensure your energy system runs smoothly.
• Informazioni sui contatti: Refer to the product packaging or Redodo's official websito per i dettagli di contatto più aggiornati.