Introduzione
This manual provides instructions for the Kariwust Linear Actuator, Model KDYJT013-105. This component is designed as a replacement motor for power recliner lift chairs. Please read these instructions carefully before installation and operation to ensure proper function and safety.
Image: Kariwust Linear Actuator Kaidi Model KDYJT013-105 shown with a recliner chair, illustrating its application.
Informazioni sulla sicurezza
Adhere to the following safety guidelines during installation, operation, and maintenance:
- Disconnessione dell'alimentazione: Always disconnect the power supply to the recliner before performing any installation, removal, or maintenance procedures.
- Connessioni sicure: Ensure all electrical connections are firm and correctly seated to prevent electrical hazards or malfunction.
- Clear Moving Parts: Keep hands, fingers, hair, and loose clothing clear of all moving parts of the actuator and recliner mechanism during operation.
- No Unauthorized Opening: Do not attempt to open, modify, or repair the motor housing. Refer servicing to qualified personnel.
- Verifica della compatibilità: Verify that the model number on your existing actuator matches KDYJT013-105 or KDYJT006-20 to ensure proper compatibility and fit.
Prodotto finitoview
The Kariwust Linear Actuator Model KDYJT013-105 is an OEM Kaidi replacement motor designed for power recliner lift chairs. It features specific connections and dimensions for broad compatibility.
Caratteristiche principali:
- Replaces Kaidi Model KDYJT006-20.
- 2-Pin flat round power transformer connection.
- 5-Pin hand control plug connection.
- Stroke: 250mm (9.84 inches).
- Minimum installation dimension: 433mm (17.05 inches).
- Maximum load: 1000N.
- Speed: 25mm/s.
Immagine: Primo piano view of the Kaidi KDYJT013-105 linear actuator motor label, showing model number, maximum load, stroke, speed, rating voltage (DC 29V), rated input (75W), and duty cycle (10%, Max 2min ON/18min OFF).
Immagine: dettagliata view of the linear actuator's power connections, including the 2-pin flat round power transformer connection and the 5-pin hand control plug connection.
Specifiche
| Specificazione | Valore |
|---|---|
| Numero modello articolo | KDYJT013-105 |
| Peso dell'articolo | 4.29 libbre |
| Dimensioni del pacco | 25 x 7 x 4 pollici |
| Colpo | 250 mm (9.84 pollici) |
| Minimum Install Dimension | 433 mm (17.05 pollici) |
| Carico massimo | 1000N |
| Velocità | 25mm/secondo |
| Voto Voltage | CC 29V |
| Ingresso nominale | 75W |
| Ciclo di lavoro | 10% (Max 2 minutes ON / 18 minutes OFF) |
| Collegamento di potenza | 2 Pin Flat Round |
| Collegamento del comando manuale | 5 perni |
Configurazione e installazione
Follow these steps to replace your existing linear actuator. Ensure the recliner is unplugged from the power source before beginning.
- Disconnessione dell'alimentazione: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor.
- Identify Existing Actuator: Locate the current linear actuator under your recliner. Note its mounting points and electrical connections.
- Verifica compatibilità: Check the label on your existing actuator. This replacement motor is compatible with Kaidi Model KDYJT013-105 and KDYJT006-20. Ensure the stroke and minimum installation dimensions match your requirements.
- Scollegare i fili: Carefully disconnect the 2-pin power transformer connection and the 5-pin hand control plug from the old actuator.
- Rimuovere il vecchio attuatore: Detach the old actuator from its mounting brackets. This typically involves removing pins or bolts.
- Installare il nuovo attuatore: Position the new KDYJT013-105 actuator in the same location as the old one. Secure it using the existing mounting hardware or the provided screw accessories.
- Collegare i fili: Connect the 2-pin flat round power transformer plug and the 5-pin hand control plug to the new actuator. Ensure connections are firm and correctly oriented.
- Funzionalità di prova: Plug the recliner back into the wall outlet. Carefully test the recliner's functions using the hand control to ensure the actuator operates smoothly and correctly.
Image: Diagram illustrating the linear actuator's stroke of 250mm (9.84 inches) and minimum installation dimension of 433mm (17.05 inches).
Image: The linear actuator shown with the accompanying screw accessories for secure installation.
Istruzioni per l'uso
Once installed, the linear actuator operates in conjunction with your recliner's hand control.
- Reclinazione/Estensione: Use the designated buttons on your recliner's hand control to extend or retract the linear actuator. This action will move the chair into the desired recline or upright position.
- Stop: Release the button on the hand control to stop the actuator at any point during its travel.
- Ciclo di lavoro: Adhere to the specified duty cycle of 10% (Maximum 2 minutes ON / 18 minutes OFF). Avoid continuous operation for extended periods to prevent overheating and ensure the longevity of the motor.
Manutenzione
The KDYJT013-105 linear actuator is designed for low maintenance. Regular checks can help ensure optimal performance.
- Ispezione regolare: Periodically inspect the actuator, its mounting points, and all electrical connections for any signs of wear, damage, or loose wiring.
- Pulizia: Keep the actuator free from dust and debris. Wipe the exterior with a dry, soft cloth. Do not use liquid cleaners directly on the motor or electrical components.
- Lubrificazione: The internal components are pre-lubricated and generally do not require additional lubrication during the product's lifespan.
- Evitare ostacoli: Ensure no objects obstruct the actuator's movement path during operation. Clear any potential impediments immediately.
Risoluzione dei problemi
If you encounter issues with your linear actuator, refer to the table below for common problems and solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'attuatore non si muove | Nessuna alimentazione | Check if the recliner is securely plugged into a functional wall outlet. |
| L'attuatore non si muove | Cablaggio allentato o errato | Ensure the 2-pin power and 5-pin hand control connections are securely attached and correctly oriented to the actuator. |
| Actuator moves intermittently or stops unexpectedly | Surriscaldamento dovuto all'uso prolungato | Allow the motor to cool down. Adhere to the 10% duty cycle (Max 2 minutes ON / 18 minutes OFF) to prevent overheating. |
| L'attuatore emette rumori insoliti | Obstruction in movement path or internal issue | Check for any physical obstructions preventing smooth movement. If noises persist, discontinue use and contact customer support. |
| Actuator does not fit the recliner | Incorrect model or dimensions | Verify that the model number (KDYJT013-105 or KDYJT006-20) and compare the stroke and minimum installation dimensions with your original part before purchase and installation. |
Garanzia e supporto
For any issues not covered in this manual, or for warranty inquiries, please contact Kariwust customer support.
Informazioni sui contatti: Refer to your purchase documentation or the Kariwust store page on Amazon for current support contact details.
Verifica della trasparenza: Each Kariwust item has a unique code that can be verified before shipping, ensuring product authenticity.