Manuale utente della telecamera PTZ BirdDog X5 Ultra

1. Introduzione

This manual provides detailed instructions for the setup, operation, and maintenance of your BirdDog X5 Ultra PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

1.1 Contenuto della confezione

• BirdDog X5 Ultra PTZ Camera with 20x Optical Zoom
• Telecomando IR
• Alimentazione 12 V CCDC
• USB-C Cable (5.9')

2. Prodotto finitoview

2.1 Caratteristiche principali

• Capture up to UHD 4K60 Resolution Video with 20x Optical Zoom and AI Auto Tracking/Framing.
• Built-In NDI|HX3 Support.
• 12G-SDI, HDMI 2.0 & USB/UVC Outputs.
• Two Integrated 2.93" E-Ink Displays.
• Built-In Halo Tally.
• PoE+ Support.
• Color Matrix for high quality in low-light conditions.
• Gigabit Ethernet connectivity.

2.2 Componenti della fotocamera

Familiarize yourself with the various parts of the BirdDog X5 Ultra PTZ Camera.

Figura 1: Fronte view of the BirdDog X5 Ultra PTZ Camera. The camera features a prominent lens and an illuminated green tally light indicating its operational status.

Figura 2: lato view of the camera, highlighting the E-Ink display which shows network information and a QR code for easy access to camera settings or support.

Figura 3: Posteriore view of the camera, detailing the various connectivity ports including LAN/PoE+, RS232/422, Audio In, HDMI-2, USB-C, HDMI-1 (MAIN), 12G-SDI, and DC 12V power input.

3. Impostazione

3.1 Alimentazione della fotocamera

1. Connect the provided 12 VDC Power Supply to the "DC 12V" port on the rear of the camera.
2. Alternatively, connect a PoE+ enabled Ethernet cable to the "LAN/PoE+" port for power and network connectivity.

3.2 Collegamenti video e audio

1. For video output, connect a 12G-SDI cable to the "12G-SDI" port or an HDMI 2.0 cable to the "HDMI-1 (MAIN)" or "HDMI-2" ports.
2. For USB video, connect the USB-C cable to the "USB-C" port and to your computer.
3. For external audio input, connect an audio source to the "AUDIO IN" port.

3.3 Connessione di rete

Connect an Ethernet cable from your network switch or router to the "LAN/PoE+" port on the camera. This enables NDI|HX3 streaming and IP control.

4. Istruzioni per l'uso

4.1 Controllo di base della telecamera

The camera can be controlled via the included IR remote, IP control software, or a compatible hardware controller.

Using the IR Remote Controller

• Point the IR remote towards the front of the camera.
• Use the directional buttons to pan and tilt the camera.
• Use the zoom buttons to adjust the optical zoom.
• Refer to the remote's specific instructions for advanced functions.

4.2 NDI|HX3 Streaming

The BirdDog X5 Ultra supports NDI|HX3 for low-latency, high-quality video transmission over IP.

1. Assicurati che la telecamera sia connessa alla rete.
2. On your NDI-enabled receiving device or software, the BirdDog X5 Ultra should appear as an available NDI source.
3. Select the camera as your NDI source to begin streaming.

4.3 AI Auto Tracking/Framing

The camera features AI-powered auto tracking and framing to keep subjects in view.

Consult the BirdDog X5 Ultra software interface or advanced settings for configuration and activation of AI features.

5. Manutenzione

5.1 Pulizia

• Pulire delicatamente il corpo della fotocamera con un panno morbido e asciutto.
• Per la pulizia delle lenti, utilizzare un panno e una soluzione specifici. Evitare materiali abrasivi.
• Assicurarsi che tutte le porte siano libere da polvere e detriti.

5.2 Aggiornamenti firmware

Controllare periodicamente il sito ufficiale UccelloCane websito for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and access to new features.

6. Risoluzione Dei Problemi

6.1 Nessun potere

• Verify the 12 VDC power supply is securely connected and plugged into a working outlet.
• If using PoE+, ensure your Ethernet switch supports PoE+ and the cable is properly connected.

6.2 Nessuna uscita video

• Check all video cables (SDI, HDMI, USB-C) for secure connections.
• Ensure the receiving device (monitor, capture card) is correctly configured to the input source.
• For NDI, confirm network connectivity and that the NDI source is selected in your software.

6.3 Camera Not Responding to Control

• For IR remote, ensure line of sight and check battery.
• For IP control, verify network connection and IP address settings.

7. Specifiche

8. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, visitare il sito ufficiale UccelloCane websito oppure contatta il loro servizio clienti.

Product registration may be required for warranty claims.