PHYSEN MMS-1-US-B Keyless Entry Fingerprint Deadbolt Lock User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your PHYSEN MMS-1-US-B Keyless Entry Fingerprint Deadbolt Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informazioni sulla sicurezza

• Do not attempt to disassemble or repair the lock yourself. This may void the warranty and cause damage.
• Use only the specified 4 AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep backup mechanical keys in a secure location outside your home.
• Ensure all screws are tightened securely during installation to prevent loosening and potential malfunction.
• Protect the keypad from excessive moisture or direct water exposure, despite its IP54 rating.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• Keyless Entry Fingerprint Deadbolt Lock (Exterior Unit)
• Unità interna
• Chiusura regolabile
• Mounting Hardware (screws, plates)
• 2 Backup Mechanical Keys
• Manuale d'uso

4. Caratteristiche del prodotto

• Metodi di sblocco multipli: Fingerprint, Passwords, One-time Codes, Mechanical Keys.
• Riconoscimento delle impronte digitali: Identifies fingerprints within 0.3 seconds with 99.99% recognition rate. Supports up to 100 fingerprints.
• Keypad Access: Supporta fino a 100 codici utente.
• Funzionalità di blocco automatico: Customizable auto-lock time from 5-99 seconds.
• Codice anti-sbirri: Allows entry of random digits before/after the actual code to prevent unauthorized viewing.
• Modalità silenziosa: Disables keypress sounds for quiet operation.
• Indicatore di batteria scarica: Avvisa quando è necessario sostituire le batterie.
• Ricarica di emergenza: Type-C port for temporary power if batteries die.
• Resistente alle intemperie: Grado di protezione IP54 per uso esterno.
• Compatibilità: Fits American standard left and right-handed doors, with backset sizes 2-3/8" or 2-3/4" (60mm or 70mm).

5. Guida all'installazione

5.1 Controllo di compatibilità delle porte

Prima dell'installazione, assicurati che la tua porta soddisfi le seguenti specifiche:

• Door Hole: 2-1/8" (54 mm)
• Entrata: 2-3/8" o 2-3/4" (60 mm o 70 mm)
• Foro di chiusura: 1" (25 mm)
• Spessore della porta: Da 1-3/8" a 2" (35-55 mm)

The lock is compatible with both left and right-handed doors. It will automatically recognize the opening direction after battery installation.

Figure 1: Door compatibility and dimensions.

5.2 Passaggi di installazione

A screwdriver is typically the only tool required for installation.

1. Rimuovi blocco esistente: Carefully remove your current deadbolt and door handle.
2. Installa fermo: Insert the new adjustable latch into the door edge. Ensure the latch is in the unlocked position before proceeding.
3. Install Exterior Unit: Place the exterior keypad unit onto the door, aligning the spindle with the latch mechanism.
4. Installare l'unità interna: Connect the interior unit to the exterior unit, ensuring the cable is properly routed and not pinched. Secure with screws.
5. Installa le batterie: Insert 4 AA alkaline batteries into the interior unit's battery compartment. The lock will perform an automatic door handing detection.
6. Funzionalità di prova: After installation, test the lock and unlock functions using the default code (refer to manual for default) and mechanical key.

Figura 2: Semplice procedura di installazione.

6. Istruzioni per l'uso

6.1 Multiple Ways to Lock/Unlock

Figura 3: Oltreview of lock/unlock methods.

6.1.1 Sblocco tramite impronta digitale

Posiziona il dito registrato sul sensore di impronte digitali. Il lucchetto si sbloccherà se l'impronta digitale viene riconosciuta.

Figure 4: Advanced fingerprint unlock.

6.1.2 Keypad Code Unlock

Enter your programmed user code on the keypad, then press the lock button. The lock will unlock.

6.1.3 Sblocco con chiave meccanica

In case of emergency or battery failure, use one of the provided mechanical keys to unlock the deadbolt.

6.2 Programming Codes and Fingerprints

Refer to the detailed instructions in the included user manual for specific steps on how to change the programming code, add new user codes, and register fingerprints. This typically involves pressing a 'Set' or '+' button on the interior unit and following voice prompts or visual cues on the keypad.

6.3 Funzione di blocco automatico

The auto-lock feature can be set to automatically lock the door after a specified period (5-99 seconds) once it's closed. To activate or adjust this feature, consult your user manual's programming section.

Figure 5: Smart auto-lock functionality.

6.4 Anti-Peeping Code

To enhance security, you can enter random digits before or after your actual user code. For example, if your code is 12345, you could enter 23712345961. The lock will still recognize the correct sequence within the longer string of numbers.

6.5 Modalità silenziosa

Activate silent mode to disable audible feedback from key presses, useful for quiet environments or late-night entry/exit.

7. Manutenzione

7.1 Sostituzione della batteria

The lock is powered by 4 AA alkaline batteries. When the low battery indicator appears, replace all four batteries promptly. Expected battery life is over 1 year under normal usage.

7.2 Alimentazione di emergenza

If the batteries completely drain, you can temporarily power the lock using a Type-C USB cable connected to a power bank. This allows you to enter your code or fingerprint to unlock the door and then replace the batteries.

7.3 Pulizia

Pulisci la superficie della serratura con un panno morbido e asciutto. Evita di utilizzare detergenti abrasivi o solventi che potrebbero danneggiare la finitura o i componenti elettronici.

8. Risoluzione Dei Problemi

9. Specifiche

• Marca: FISEN
• Numero modello: MMS-1-US-B
• Tipo di blocco: Catenaccio biometrico
• Materiale: Alluminio
• Colore: Nero
• Tipo di finitura: Nero opaco
• Fonte di energia: 4 batterie alcaline AA (non incluse)
• Caratteristiche speciali: Fingerprint, Anti-Peeping Password, One-Touch Lock, Auto-Lock, Back-Lit Keypad, Emergency Type-C Charging
• Resistenza alle intemperie: Grado di protezione IP54
• Dimensioni articolo (L x P x A): 12.4 x 9.9 x 7.6 centimetri

10. Garanzia e supporto

For warranty information or technical support, please contact PHYSEN customer service at formworld-us@outlook.com. Please provide your model number (MMS-1-US-B) and purchase details when contacting support.