Kariwust Linear Actuator KDPT007-03 Instruction Manual

1. Prodotto finitoview

The Kariwust Linear Actuator Model KDPT007-03 is designed as a replacement motor for power recliner lift chairs. It is compatible with and replaces Kaidi Motor Models KDPT007-11, KDPT007-12, KDPT007-14, and KDPT007N-59, as well as various other brands and models. This actuator facilitates the smooth operation of your recliner's lifting and reclining functions.

Figura 1.1: The Kariwust Linear Actuator KDPT007-03. The label clearly displays the model number, maximum load, speed, and stroke length.

2. Caratteristiche principali

• OEM Kaidi Compatibility: Direct replacement for Kaidi Power Recliner Lift Chairs Motor Actuator Model KDPT007-03.
• Broad Replacement: Replaces Kaidi Models KDPT007-11, KDPT007-12, KDPT007-14, and KDPT007N-59. Always verify your existing motor's label before ordering.
• Collegamenti standard: Features a 2-pin flat round power transformer connection and a 5-pin hand control plug connection for easy integration.
• Optimal Stroke: Provides a stroke length of 326 mm (12.83 inches) for full range of motion.
• Installazione compatta: Minimum installation dimension of 139 mm (5.47 inches).
• Funzionamento efficiente: Operates at a speed of 42 mm/s with a maximum load capacity of 800 N.
• Installazione semplice: Designed for straightforward replacement and setup.

3. Specifiche tecniche

Figura 3.1: Actuator dimensions, illustrating the stroke length and minimum installation size.

4. Configurazione e installazione

Importante: Before beginning installation, ensure the recliner is unplugged from the power source to prevent electrical shock. It is recommended to have two people for safe installation.

1. Prepare the Recliner: Unplug the recliner from the wall outlet. Position the recliner to allow easy access to the existing linear actuator. This may involve tilting the chair or laying it on its side.
2. Identificare le connessioni: Locate the power transformer connection (usually a 2-pin flat round connector) and the hand control plug connection (a 5-pin connector) on your existing actuator.
3. Disconnect Old Actuator: Carefully disconnect the power and hand control cables from the old actuator. Note their orientation for re-connection.
4. Rimuovere il vecchio attuatore: The actuator is typically secured by pins or bolts at both ends. Remove these fasteners to detach the old actuator from the recliner frame. Keep these fasteners for the new installation.
5. Installare il nuovo attuatore: Position the new KDPT007-03 actuator in the same location as the old one. Secure it using the original pins or bolts. Ensure it is firmly attached and moves freely without obstruction.
6. Collegare i cavi:
   • Connect the 2-pin flat round plug from the power transformer to the corresponding port on the new actuator.
   • Connect the 5-pin plug from the hand control to its designated port on the new actuator.
7. Gestione dei cavi: Ensure all cables are routed safely and are not pinched or tangled in the recliner mechanism. Use cable ties if necessary.
8. Funzionalità di prova: Plug the recliner back into the power outlet. Carefully test the recliner's functions using the hand control to ensure the actuator operates smoothly and correctly.

Figura 4.1: Dettagliato view of the power transformer (2-pin) and hand control (5-pin) connections.

5. Istruzioni per l'uso

Once installed, the KDPT007-03 linear actuator operates in conjunction with your recliner's existing hand control unit. The operation is straightforward:

• Accensione: Ensure the recliner is plugged into a functional wall outlet.
• Utilizzo del controllo manuale:
  • Press and hold the designated button on your hand control to extend the actuator rod, which typically moves the recliner to an upright or extended position.
  • Press and hold the other designated button to retract the actuator rod, moving the recliner to a reclined or closed position.
• Movimento fluido: The actuator is designed for smooth and controlled movement. Release the button on the hand control to stop the movement at any desired position.
• Ciclo di lavoro: Adhere to the maximum duty cycle of 2 minutes ON and 18 minutes OFF (10%). Continuous operation beyond this limit can lead to overheating and damage to the motor.

6. Manutenzione

The KDPT007-03 linear actuator is designed for minimal maintenance. However, periodic checks can ensure its longevity and optimal performance:

• Ispezione visiva: Periodically inspect the actuator and its connections for any signs of wear, damage, or loose cables.
• Pulizia: Keep the actuator free from dust, dirt, and debris. Use a soft, dry cloth to wipe down the exterior. Avoid using harsh chemicals or abrasive cleaners.
• Integrità del cavo: Ensure all power and control cables are securely connected and not frayed, pinched, or damaged.
• Lubrificazione: The internal components are pre-lubricated and generally do not require additional lubrication. If unusual noises occur, consult a professional.
• Condizioni ambientali: Operate the actuator in a dry environment. Avoid exposure to moisture or extreme temperatures.

7. Risoluzione Dei Problemi

If you encounter issues with your KDPT007-03 linear actuator, refer to the following troubleshooting guide:

8. Garanzia e supporto

For specific warranty information regarding your Kariwust Linear Actuator KDPT007-03, please refer to the documentation provided at the time of purchase or contact the seller directly. If you have any questions or require technical assistance, please reach out to the Kariwust customer support team through the retailer where the product was purchased or via the official Kariwust websito.

When contacting support, please have your product model number (KDPT007-03) and purchase details readily available.