BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le avvertenze e le istruzioni di sicurezza prima di utilizzare questo prodotto. La mancata osservanza delle avvertenze e delle istruzioni può causare scosse elettriche, incendi e/o lesioni gravi.

• Non fare riavviare una batteria congelata.
• Non fare utilizzare l'avviatore di emergenza se i cavi o clampsono danneggiati.
• Ensure proper polarity: Collegare il cl rossoamp al terminale positivo (+) e al cl . neroamp to the negative (-) terminal. Reverse polarity can cause damage.
• Rimuovi clamps promptly: Scollegare il clamps from the vehicle battery immediately after the engine starts.
• Tenere lontano dai bambini: Questo dispositivo non è un giocattolo.
• Temperatura di esercizio: Use the device within the specified temperature range (-4°F to 140°F).
• Ventilazione: Ensure adequate ventilation when operating the air compressor.
• Caratteristiche di protezione: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Prodotto finitoview E componenti

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Cosa c'è nella scatola

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Smart Jumper Clamps (rosso per positivo, nero per negativo)
• Air Hose with Quick Connector
• Vari ugelli dell'aria (per diversi gonfiabili)
• Cavo di ricarica USB-C
• Manuale d'uso
• Custodia di stoccaggio

2.2 Caratteristiche del prodotto

• Corrente di picco 7000A: Capable of starting all gas engines and up to 10.0L diesel engines.
• Compressore d'aria da 150 PSI: Cordless inflator with tire pressure detection for various inflatables.
• Power Bank da 26800 mAh: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• Schermo LCD da 3.4": Clear display for battery status, pressure readings, and operational modes.
• Doppie luci LED: Features Normal, SOS, and Strobe modes for emergency illumination.
• Protezioni di sicurezza avanzate: 10 types of protection for safe operation.
• Funzionamento in tutte le condizioni atmosferiche: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Pannello di controllo e porte

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• Schermo LCD: Shows battery level, pressure, and mode.
• Pulsante "M": Mode/Unit Switching (e.g., PSI, BAR, KPA).
• Pulsante "OK": Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• Pulsante "+": Preset Air Pressure Increase.
• Pulsante "-": Preset Air Pressure Decrease.
• Porta di avvio rapido: Per collegare il jumper intelligente clamps.
• Porta del tubo dell'aria: Per collegare il tubo dell'aria.
• Porte di uscita USB-A (x2): Per caricare dispositivi esterni.
• Porta di ingresso/uscita USB-C (x1): Per caricare l'avviatore di emergenza o dispositivi esterni.

3. Impostazione

3.1 Ricarica dell'avviatore di emergenza

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Collegare l'altra estremità del cavo USB-C a un adattatore da parete USB (non incluso) o a una porta USB alimentata.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. La ricarica è completa quando l'indicatore della batteria indica che è piena.

4. Istruzioni per l'uso

4.1 Avviamento di emergenza di un veicolo

Assicurarsi che l'avviatore di emergenza sia sufficientemente carico (si consiglia almeno il 50% di carica della batteria).

1. Fase 1: Inserire la spina blu del jumper intelligente clamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. Fase 2: Collegare il rosso (+) clamp al terminale positivo della batteria del veicolo. Collegare il polo nero (-)amp al terminale negativo della batteria del veicolo.
3. Fase 3: Una volta connesso, lo smart clamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. Fase 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, quindi il rosso (+) clamp. Disconnect the smart clampdall'unità di avviamento di emergenza.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 Utilizzo del compressore d'aria

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Utilizzare i pulsanti "+" e "-" per impostare la pressione target desiderata.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Scollegare l'ugello e il tubo dell'aria.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Utilizzo come Power Bank

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. L'avviatore di emergenza inizierà automaticamente a caricare il tuo dispositivo.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Utilizzo della torcia a LED

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Manutenzione

• Ricarica: Ricaricare l'avviatore di emergenza ogni 3-6 mesi, anche se non utilizzato, per prolungare la durata della batteria.
• Pulizia: Pulire l'unità con un panno asciutto e morbido. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.
• Magazzinaggio: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Cura del cavo: Inspect jumper cables and air hose for any damage before each use.

6. Risoluzione Dei Problemi

7. Specifiche

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Garanzia e supporto

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: Puoi restituire il prodotto entro 30 giorni dall'acquisto per qualsiasi motivo.
• Assistenza clienti 24 ore su 7, XNUMX giorni su XNUMX: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM websito.