OLTEANP 4000W Power Inverter User Manual

1. Introduzione

This manual provides essential information for the safe and efficient operation of your OLTEANP 4000W Power Inverter. This device converts 12V DC battery power into 110V AC household electricity, suitable for various applications in vehicles, RVs, and off-grid setups. Please read all instructions carefully before installation and use.

2. Istruzioni di sicurezza

• Ventilazione: Assicurare un'adeguata ventilazione attorno all'inverter. Non ostruire le prese d'aria di raffreddamento.
• Ambiente secco: Keep the inverter away from water, moisture, and rain.
• Temperatura: Operate the inverter within recommended temperature ranges. Avoid direct sunlight or heat sources.
• Materiali infiammabili: Do not operate near flammable materials, gases, or liquids.
• Collegamento corretto: Connect the inverter only to a 12V DC power source. Ensure correct polarity (+ to + and - to -).
• Messa a terra: Always ground the inverter properly to prevent electrical shock.
• Capacità di carico: Non superare la potenza nominale continua (4000 W) o la potenza nominale di picco (8000 W) dell'inverter.
• Bambini: Tenere l'inverter fuori dalla portata dei bambini.
• Manutenzione: Non tentare di smontare o modificare l'inverter. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• 1 x OLTEANP 4000W Power Inverter
• 1 Pair of Battery Cables (Red for Positive, Black for Negative)
• 1 x Remote Controller with LCD Screen
• 1 x Manuale dell'utente (questo documento)

4. Prodotto finitoview

The OLTEANP 4000W Power Inverter is designed to provide reliable AC power from a 12V DC source. It features multiple output ports and advanced safety protections.

Figure 4.1: Front and Rear Panels of the OLTEANP 4000W Power Inverter. The front panel includes four AC outlets, a 3.1A USB port, a 30W Type-C port, remote control ports, an ON/OFF switch, and an LED indicator. The rear panel features positive (BAT+) and negative (BAT-) battery terminals and smart cooling fans.

Figure 4.2: The remote controller with an LCD screen provides real-time monitoring of battery voltage, AC output, and power consumption. It also allows for convenient control and connection to your devices.

Figure 4.3: The inverter incorporates an intelligent chip for multi-functional safety protection, ensuring reliable and stable operation. Protections include high-voltage, sovraccarico, alta temperatura, basso volumetage, and short-circuit safeguards.

Video finitoview

5. Configurazione e installazione

5.1 Collegamento a una batteria da 12 V CC

1. Assicurarsi che l'inverter sia spento.
2. Collegare il cavo rosso della batteria al terminale positivo (+) dell'inverter e al terminale positivo (+) della batteria da 12 V.
3. Collegare il cavo nero della batteria al terminale negativo (-) dell'inverter e al terminale negativo (-) della batteria da 12 V.
4. Assicurarsi che tutti i collegamenti siano ben saldi e sicuri per evitare archi elettrici o surriscaldamenti.

Figure 5.1: The inverter package includes battery cables for direct connection to a 12V battery. Ensure proper polarity when connecting.

5.2 Messa a terra dell'inverter

For safety, the inverter must be properly grounded. Connect the earth wire terminal on the inverter to a suitable ground point in your vehicle or system.

Figure 5.2: The inverter features a ground wire connection point. Proper grounding helps absorb interference and ensures stability and reliability.

5.3 Selectable Input Voltage and Battery Types

The inverter is compatible with various 12V DC battery types. You can adjust the low voltage shutdown setting based on your battery type to protect battery health and extend its lifespan. Refer to the table below for settings.

Figure 5.3: Selectable input voltage settings for various 12V DC battery types. Adjust these settings to optimize battery protection.

NOTE: Please select the correct input voltage setting before turning on the inverter.

5.4 Typical Wiring Diagram (Solar System Example)

Figura 5.4: Esample wiring diagram for integrating the OLTEANP 4000W Power Inverter into a solar power system, demonstrating connections between solar panels, a charge controller, a battery, and the inverter to power appliances.

6. Istruzioni per l'uso

6.1 Accensione/Spegnimento

After ensuring all connections are secure and correct, press the ON/OFF switch on the inverter or the remote controller to power on the unit. The LCD screen will illuminate, displaying operational status. To power off, press the switch again.

6.2 Using AC Outlets and USB/Type-C Ports

Once the inverter is on, you can plug your 110V AC appliances into the four AC outlets. For charging mobile devices, use the 3.1A USB port or the 30W Type-C port.

Figure 6.1: The 4000W inverter can power a wide range of appliances, including refrigerators, microwaves, coffee makers, power tools, TVs, and laptops. Ensure the total operating wattage non supera i 4000 watt.

6.3 Understanding the LCD Screen and Remote Controller

The LCD screen on the remote controller provides real-time information:

• Livello della batteria: Indicates the remaining charge in your 12V battery.
• Ingresso CC Voltage: Mostra il volume correntetage dalla batteria.
• Volume di uscita CAtage: Visualizza il volume di uscitatage (110 V CA).
• Cosatage: Mostra il consumo energetico attuale dei dispositivi collegati.
• Codici di errore: In case of an error, the screen will display a fault code and the corresponding symbol will flash to indicate the issue (e.g., Overload, High Voltage, basso voltage, Overheat).

Figure 6.2: The remote controller's LCD screen displays trouble alarms and assists in troubleshooting by flashing the corresponding fault symbol.

7. Manutenzione

• Pulizia: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure cooling vents are free from dust and debris.
• Connessioni: Regularly check battery cable connections to ensure they remain tight and free from corrosion.
• Magazzinaggio: Se si conserva l'inverter per un periodo prolungato, scollegarlo dalla batteria e conservarlo in un luogo fresco e asciutto.

8. Risoluzione Dei Problemi

The LCD screen on the remote controller is your primary tool for identifying issues. Observe any flashing symbols or fault codes displayed.

9. Specifiche

10. Garanzia e supporto

The OLTEANP 4000W Power Inverter comes with a Garanzia di 12 mesi. For any questions, technical assistance, or warranty claims, please contact our professional customer support team, available 24/7. Refer to the contact information provided with your purchase or on the official OLTEANP websito.