XREXS PH-09 14.5" Digital Wall Clock Instruction Manual

Introduzione

Thank you for choosing the XREXS PH-09 14.5" Digital Wall Clock. This versatile clock features a large, easy-to-read LCD display, battery operation for flexible placement, and multiple functions including time, date, day of the week, temperature, and an alarm with snooze. This manual provides detailed instructions to help you set up and operate your new digital clock.

Image: The XREXS digital wall clock showcasing its various display features and functional icons.

Impostare

Installazione della batteria

The XREXS PH-09 Digital Wall Clock is battery-operated for convenience and portability. It requires 4 AA batteries, which are included with your purchase.

1. Individuare il vano batteria sul retro dell'orologio.
2. Use the provided small screwdriver to open the battery compartment cover.
3. Inserire 4 batterie AA, assicurandosi della corretta polarità (+/-).
4. Riposizionare il coperchio del vano batteria e fissarlo con la vite.

The clock features a low battery indicator to remind you when to replace the batteries.

Opzioni di montaggio

Your digital clock offers two convenient placement methods:

• Posizionamento sul tavolo: The clock has a built-in bracket on the back, allowing it to stand securely on any flat surface such as a desk, table, or shelf.
• Montaggio a parete: For wall installation, use the two keyhole slots located on the back of the clock. A mounting template is provided to assist with accurate placement of screws on your wall.

Image: Illustration of the wall mounting keyholes and the tabletop stand on the back of the clock.

Accensione iniziale

Upon inserting batteries, the clock should automatically power on and display default settings. You may need to adjust the time, date, and other preferences as described in the 'Operating' section.

Video: An official XREXS video demonstrating the features and setup of the large digital wall clock.

Istruzioni per l'uso

The control buttons are conveniently located on the top edge of the clock for easy access.

Image: The control buttons on the top of the XREXS digital clock.

Impostazione di ora e data

1. Premere il tasto IMPOSTAZIONE DELL'ORA per accedere alla modalità di impostazione dell'ora. L'anno inizierà a lampeggiare.
2. Utilizzare il + or - pulsanti per regolare l'anno.
3. Premere IMPOSTAZIONE DELL'ORA again to move to month, then date, hour, and minute settings, adjusting each with the + or - pulsanti.
4. Premere IMPOSTAZIONE DELL'ORA one last time to confirm and exit.

12/24 Hour Display Mode

Premere il tasto 12/24 button to toggle between 12-hour (with AM/PM indicator) and 24-hour display formats.

Selezione unità di temperatura

Premere il tasto ° C / ° F pulsante per cambiare la visualizzazione della temperatura tra Celsius e Fahrenheit.

Automatic Daylight Saving Time (DST)

Premere il tasto AUTO DST button to enable or disable the automatic adjustment for Daylight Saving Time. When enabled, the clock will automatically adjust for DST changes.

Impostazione allarme

1. Premere il tasto SET ALLARME button to enter alarm setting mode. The alarm hour will flash.
2. Utilizzare il + or - pulsanti per regolare l'ora della sveglia.
3. Premere SET ALLARME again to move to alarm minute setting, adjusting with + or - pulsanti.
4. Premere SET ALLARME one last time to confirm and exit.

Allarme attivato/disattivato

Premere il tasto ALLARME ON / OFF pulsante per attivare o disattivare la sveglia. Quando la sveglia è attiva, sul display apparirà un'icona di allarme.

Funzione snooze

Quando suona la sveglia, premere il tasto POSTICIPARE button to temporarily silence the alarm for 9 minutes. You can snooze up to 5 times.

Alarm Working Modes

The clock supports three alarm working modes:

• Working Day: La sveglia suona dal lunedì al venerdì.
• Fine settimana: La sveglia suona sabato e domenica.
• Ogni giorno: Alarm sounds seven days a week.

Image: Visual representation of the snooze function and different alarm working modes.

Manutenzione

Pulizia

To clean your XREXS digital clock, gently wipe the display and casincon un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi, poiché potrebbero danneggiare la superficie.

Sostituzione della batteria

When the low battery indicator appears on the display, replace all 4 AA batteries promptly to ensure continuous and accurate operation. Refer to the 'Battery Installation' section for instructions.

Risoluzione dei problemi

• Il display è vuoto: Assicurarsi che le batterie siano installate correttamente e non siano scariche. Sostituirle se necessario.
• Ora/data errate: Follow the 'Time and Date Setting' instructions to manually set the correct time and date.
• L'allarme non suona: Check if the alarm is activated (alarm icon visible). Ensure the alarm volume is not set to zero (if applicable, though not specified for this model). Verify the alarm time is correctly set.
• La lettura della temperatura non è accurata: The temperature sensor is internal. Ensure the clock is not placed near heat sources or in direct sunlight, which could affect the reading.

Specifiche

Garanzia

XREXS products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact XREXS customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Supporto

If you encounter any issues or have questions regarding your XREXS PH-09 Digital Wall Clock, please contact our customer support team. Contact information can typically be found on the product packaging or on the official XREXS website. Please have your model number (PH-09) and purchase details ready when contacting support.