RSH WL08 Zigbee Wireless Water Leak Detector & Hub User Manual

1. Introduzione

The RSH WL08 Zigbee Wireless Water Leak Detector and Hub system is designed to provide real-time water leak detection and alerts for your home. This system helps prevent costly water damage by notifying you promptly when a leak is detected. The detectors are compact, waterproof, and integrate with smart home applications via a Zigbee gateway.

Image: The RSH Water Leak Detector emits a loud 110dB audible alarm when water is detected, providing immediate notification.

2. Contenuto della confezione

• RSH WL08 Water Leak Detectors (4-Pack)
• Zigbee Gateway Hub
• Cavo di alimentazione per hub
• Manuale d'uso

3. Istruzioni per l'installazione

3.1 Prepare the Water Leak Detectors

1. Turn the top cover of the water leak alarm counter-clockwise to open it.
2. Remove the battery insulation tape to activate the pre-installed CR-2032 battery.
3. Close the top cover by turning it clockwise.

3.2 Connect the Zigbee Gateway Hub

1. Plug in the Zigbee Gateway Hub to a power source using the provided power cable.
2. Scarica l'app Tuya Smart o Smart Life dall'app store del tuo smartphone.
3. Apri l'app e crea un account o accedi.
4. In the app, click the '+' sign in the upper right corner to add a new device.
5. Cercare and select the Zigbee Gateway. Follow the in-app instructions to connect the gateway to your 2.4GHz Wi-Fi network (5G networks are not supported).

Image: Step-by-step visual guide for connecting the Zigbee Gateway and water leak sensor to the smart home application.

3.3 Pair Water Leak Detectors with the Gateway

1. Once the gateway is successfully added to the app, tap on the gateway device in the app.
2. Select the 'Zigbee' device list option.
3. On the water leak detector, press and hold the network button for approximately 5-10 seconds until the blue LED indicator light flashes rapidly, indicating it is in pairing mode.
4. The app will automatically search for and add the water leak sensor. Confirm the addition in the app.
5. Repeat for all additional water leak detectors.

4. Istruzioni per l'uso

4.1 Posizionamento

Place the water leak detectors in areas prone to water leaks, such as:

• Under kitchen sinks or dishwashers
• Near washing machines or water heaters
• In bathrooms, near toilets or bathtubs
• In scantinati o locali di servizio

Image: The compact size of the water leak detector allows for discreet placement in various locations throughout the home.

4.2 Rilevamento perdite e avvisi

The water leak detector features two sensitive probes on its bottom surface. When these probes detect water, the device will:

• Emit a 75dB "beep" alarm sound.
• Its LED indicator will blink quickly.
• Send real-time notifications to your smartphone via the Tuya Smart or Smart Life app.

To mute the local alarm, simply pick up the detector from the water. The app notifications will continue until the sensor is dry.

Image: Real-time notifications are sent to your smartphone, alerting you to water leaks even when you are away from home.

4.3 Advanced Notification Options

In addition to free in-app notifications, email and SMS notification services are available (may incur charges) for enhanced home protection.

If your Wi-Fi connection is lost, the smart water sensor will still emit a loud 110dB local alarm to ensure you are alerted to any water leaks.

5. Manutenzione

5.1 Pulizia

After a water detection event, ensure the sensor probes on the bottom of the device are completely dry to clear the alarm and reset the sensor. Use a soft, dry cloth to wipe the sensor clean.

5.2 Sostituzione della batteria

The water leak detector uses a CR-2032 Lithium Metal battery. When the battery level is low, the app will typically notify you. To replace the battery:

1. Turn the top cover counter-clockwise to open the device.
2. Carefully remove the old CR-2032 battery.
3. Inserire una nuova batteria CR-2032 con il lato positivo (+) rivolto verso l'alto.
4. Close the top cover by turning it clockwise.

Image: The app will display a low battery warning when the detector's battery needs replacement.

6. Risoluzione Dei Problemi

6.1 Il dispositivo non si connette all'app

• Check Wi-Fi Network: Ensure your Wi-Fi network is 2.4GHz. 5G networks are not compatible with the Zigbee Gateway.
• Potenza del gateway: Verify the Zigbee Gateway is powered on and its indicator lights are active.
• Modalità di accoppiamento: Make sure the water leak detector is in pairing mode (blue LED flashing rapidly) when attempting to add it.
• Selezione app: When adding the sensor, ensure you select the correct Zigbee device type in the app, not a Bluetooth option if presented.
• Ripristina dispositivo: If issues persist, try resetting the water leak detector by removing and reinserting the battery, then re-attempt pairing.

6.2 No Alarm or Notification on Water Detection

• Livello della batteria: Check the battery status of the detector in the app. Replace if low.
• Contatto del sensore: Ensure the two metal probes on the bottom of the detector are making proper contact with the water.
• Notifiche dell'app: Verify that app notifications are enabled for the Tuya Smart or Smart Life app in your phone's settings.
• Connessione gateway: Confirm the Zigbee Gateway is online and connected to your Wi-Fi.

7. Specifiche

8. Garanzia e supporto

For warranty information or technical support, please refer to the product packaging or contact RSH customer service through their official channels. Keep your purchase receipt for warranty claims.