Prodotto finitoview
The Alessi Pulcina MDL02/6BFM is a designer espresso coffee maker crafted from cast aluminum, suitable for induction hobs. It features a unique design by Michele De Lucchi and is engineered to optimize coffee extraction and pouring.

Image: Alessi Pulcina MDL02/6BFM 6-Cup Espresso Coffee Maker in Black.
Impostare
- Smontaggio: Unscrew the top collection container from the boiler base. Remove the funnel filter.
- Pulizia iniziale: Before first use, wash all parts with warm water and mild soap. Rinse thoroughly.
- Riempimento d'acqua: Fill the boiler (bottom part) with cold water up to the level of the safety valve. Non superare la valvola di sicurezza. For faster brewing, especially on induction hobs, you may use pre-heated water, but ensure it is not boiling when added to prevent scalding.
- Ripieno di caffè: Place the funnel filter into the boiler. Fill the filter with finely ground espresso coffee. Do not press or tamp the coffee too firmly, as this can impede water flow.
- Montaggio: Carefully screw the top collection container onto the boiler base, ensuring a tight seal to prevent steam leakage during brewing.
Istruzioni per l'uso
- Posizionamento: Place the assembled coffee maker on a suitable heat source (gas or induction hob). Ensure the flame or heat element does not extend beyond the base of the coffee maker.
- Riscaldamento: Heat the coffee maker on medium heat. The water in the boiler will heat up, creating steam pressure that forces water through the coffee grounds and into the upper collection chamber.
- Brewing Observation: Monitor the brewing process. Coffee will begin to emerge from the central column into the upper chamber. The Pulcina's design is intended to interrupt extraction at the optimal moment to prevent a burnt taste.
- Completamento: Once the coffee flow slows down or stops, remove the coffee maker from the heat source. Do not allow the boiler to run completely dry, as this can damage the unit.
- Porzione: Carefully pour the freshly brewed espresso into cups. The V-shaped spout is designed to cut the drop cleanly when pouring.

Image: Alessi Pulcina Espresso Maker on a gas stove during the brewing process.

Image: Freshly brewed coffee being poured from the Alessi Pulcina into a cup.
Manutenzione
- Pulizia giornaliera: After each use, allow the coffee maker to cool completely. Disassemble all parts and wash them with warm water. Avoid using abrasive sponges or harsh detergents, which can damage the aluminum finish.
- Sicurezza della lavastoviglie: The Alessi Pulcina MDL02/6BFM is dishwasher safe. However, hand washing is recommended to preserve the finish and extend the product's lifespan.
- Essiccazione: Dry all components thoroughly before reassembling and storing to prevent water spots and corrosion.
- Guarnizione e filtro: Controllare periodicamente la guarnizione in gomma e la piastra del filtro per verificarne l'usura. Sostituirle se appaiono danneggiate o se si notano perdite di vapore durante l'erogazione.
Risoluzione dei problemi
- Coffee not brewing or brewing too slowly:
- Ensure the coffee maker is tightly screwed together.
- Check that the coffee grounds are not tamped too firmly, which can block water flow.
- Verify that the heat source is adequate. On induction hobs, brewing may take longer compared to gas. Using pre-heated water in the boiler can significantly speed up the process.
- Assicurarsi che la valvola di sicurezza non sia ostruita.
- Perdita d'acqua dal lato:
- Confirm the top and bottom sections are securely tightened.
- Inspect the rubber gasket for damage or improper placement. Replace if necessary.
- Burnt taste in coffee:
- Remove the coffee maker from the heat source immediately after the coffee finishes brewing to prevent overheating the remaining water and grounds.
- Ensure the heat setting is not too high.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Alessi |
| Nome del modello | Pulcina |
| Numero di modello | MDL02/6BFM |
| Capacità | 30 Centiliters (6 cups) |
| Colore | Nero |
| Dimensioni del prodotto | 7.87"P x 4.72"L x 10.24"A |
| Materiale | Aluminum, Plastic (handle and knob) |
| Tipo di caffettiera | Moka Pot |
| Fonte di alimentazione | Induction (also suitable for gas hobs) |
| Lavabile in lavastoviglie | SÌ |
| Peso dell'articolo | 0.9 chilogrammi |
Garanzia e supporto
For warranty information and customer support, please refer to the official Alessi webo contattare direttamente il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.
Visitare il Negozio Alessi su Amazon per ulteriori prodotti e informazioni.