Introduzione
Grazie per l'acquistoasing the THOMSON QY-BG002 BB83944 Wall Art Wireless Bluetooth Speaker. This device combines aesthetic wall art with a high-quality wireless audio experience. This manual provides essential information for the safe and efficient use of your speaker, including setup, operation, maintenance, and troubleshooting.
Informazioni sulla sicurezza
- Non esporre l'altoparlante ad acqua, umidità o temperature estreme.
- Evitare di far cadere o di sottoporre l'altoparlante a forti urti.
- Non tentare di smontare, riparare o modificare autonomamente l'altoparlante. Contattare personale di assistenza qualificato per assistenza.
- Utilizzare solo il cavo di ricarica fornito o un equivalente certificato.
- Tenere l'altoparlante lontano da fonti di calore e fiamme libere.
- Assicurare una ventilazione adeguata durante l'uso dell'altoparlante.
Contenuto della confezione
Si prega di verificare che tutti gli articoli siano presenti nel pacco:
- THOMSON QY-BG002 BB83944 Wall Art Wireless Bluetooth Speaker
- Cavo di ricarica USB di tipo C.
- Manuale dell'utente (questo documento)
- Hardware di montaggio (viti, tasselli a muro)
Prodotto finitoview
Familiarizza con i componenti e i comandi del tuo altoparlante.
Figura 1: Davanti view dell'oratore, mostratoasing the wall art design.
Figura 2: Lato view of the speaker, highlighting its slim design.
Figura 3: Indietro view of the speaker, indicating the location of the power button and USB-C charging port.
Impostare
1. Ricarica dell'altoparlante
Before initial use, fully charge the speaker. Connect the provided USB Type-C cable to the charging port on the back of the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 3-4 hours.
2. Montaggio dell'altoparlante
The speaker is designed for wall mounting. Use the included mounting hardware for secure installation.
- Choose a suitable location on a wall, ensuring it is structurally sound to support the speaker's weight.
- Mark the positions for the mounting screws using the speaker's rear mounting points as a guide.
- Drill pilot holes at the marked positions. Insert wall anchors if necessary for drywall or plaster.
- Secure the mounting screws into the wall, leaving a small gap for the speaker to hang.
- Carefully align the speaker's mounting slots with the screws and slide it down to secure it in place.
Figura 4: Detail of the speaker's mounting bracket for wall installation.
Figura 5: Corner detail of the speaker, illustrating the frame and a mounting point.
Istruzioni per l'uso
1. Accensione/spegnimento
Press and hold the power button located on the back of the speaker for approximately 3 seconds to turn it on or off. A voice prompt or indicator light will confirm the status.
2. Accoppiamento Bluetooth (singolo altoparlante)
- Accendi l'altoparlante. Entrerà automaticamente in modalità di associazione Bluetooth, indicata da una luce LED lampeggiante.
- Sul tuo dispositivo abilitato Bluetooth (smartphone, tablet, laptop), attiva il Bluetooth e cerca i dispositivi disponibili.
- Select "THOMSON QY-BG002" from the list of devices.
- Once paired, the speaker will confirm with a voice prompt, and the LED light will stop flashing.
3. Accoppiamento True Wireless Stereo (TWS) (due altoparlanti)
To achieve a stereo sound experience, you can pair two THOMSON QY-BG002 speakers together.
- Assicurarsi che entrambi gli altoparlanti siano carichi e accesi.
- Do not connect either speaker to your Bluetooth device yet.
- On one speaker (this will be the primary speaker), double-press the power button. It will enter TWS pairing mode.
- The two speakers will automatically search for and connect to each other. A voice prompt will confirm successful TWS pairing.
- Once TWS paired, connect your Bluetooth device to the primary speaker as described in "Bluetooth Pairing (Single Speaker)" above. The primary speaker will then transmit audio to both speakers for stereo sound.
4. Riproduzione audio
After successful Bluetooth pairing, play audio from your connected device. The sound will be output through the speaker(s).
5. Controllo del volume
Adjust the volume directly from your connected Bluetooth device. The speaker does not have independent volume controls.
6. Connettività USB
The USB Type-C port is primarily for charging. It does not support audio input directly from a USB drive or device for playback.
Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire la superficie dell'altoparlante. Non utilizzare detergenti abrasivi, cere o solventi.
- Cura della batteria: Per prolungare la durata della batteria, evitare di scaricarla completamente frequentemente. Ricaricare regolarmente l'altoparlante, anche se non lo si utilizza per lunghi periodi.
- Magazzinaggio: When storing the speaker for a long time, ensure it is fully charged and stored in a cool, dry place away from direct sunlight.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'altoparlante non si accende. | La batteria è scarica. | Caricare l'altoparlante utilizzando il cavo USB Type-C in dotazione. |
| Impossibile accoppiarsi con il dispositivo Bluetooth. | L'altoparlante non è in modalità di associazione; il Bluetooth è disattivato sul dispositivo; il dispositivo è troppo lontano. | Ensure speaker is on and in pairing mode (flashing LED). Turn on Bluetooth on your device. Move device closer to the speaker (within 10 meters). |
| Nessun suono dopo l'associazione. | Volume on device is too low; incorrect audio output selected on device. | Increase volume on your connected device. Ensure the speaker is selected as the audio output on your device. |
| L'associazione TWS non è riuscita. | Speakers were already connected to a device; incorrect TWS pairing procedure. | Ensure both speakers are disconnected from any Bluetooth devices. Follow the TWS pairing steps carefully, double-pressing the power button on one speaker. |
| Scarsa qualità del suono o connessione intermittente. | Interferenza; dispositivo troppo lontano; batteria scarica. | Move closer to the speaker. Avoid obstacles between the speaker and device. Charge the speaker. Reduce interference from other wireless devices. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | QY-BG002 BB83944 |
| Materiale audio | PVC Plastic + MDF Board |
| Versione Bluetooth | 5.2 |
| Portata Bluetooth | Fino a 10 metri (33 piedi) |
| Potenza di uscita | 4*10W (totale 40W) |
| Risposta in frequenza | Da 80 Hz a 20 kHz |
| Tipo di batteria | 18650 agli ioni di litio |
| Capacità della batteria | 7.4 V 6000 mAh |
| Durata media della batteria | Circa 10 ore (al 50% del volume) |
| Porta di ricarica | USB di tipo C |
| Bare Metal Size (L*W*H) | 460 mm * 330 mm * 47 mm (18.11"P x 1.85"L x 13"A) |
| Peso dell'articolo | 6 libbre |
| Metodo di controllo | Tocco |
| Tipo di montaggio | Montaggio a parete |
Video del prodotto
Video: Un oltreview of the THOMSON Wall Art Wireless Bluetooth Speaker, demonstrating its features and design.
Garanzia e supporto
Informazioni sulla garanzia
This THOMSON QY-BG002 BB83944 speaker comes with a Garanzia limitata di 1 anno dalla data di acquisto. La presente garanzia copre i difetti di fabbricazione nei materiali e nella lavorazione in condizioni di normale utilizzo. Non copre i danni causati da uso improprio, incidenti, modifiche non autorizzate o cause esterne.
Assistenza clienti
For technical assistance, warranty claims, or further inquiries, please refer to the contact information provided with your purchase documentation or visit the official THOMSON support websito.