AW Electric Bike Conversion Kit

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your AW Electric Bike Conversion Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Safety First: Always wear a helmet when riding an electric bicycle. This kit is designed for conventional bicycles and mountain bikes, not for tricycles or tractors. Avoid use in rainy conditions.

Image: An electric bike conversion kit installed on a bicycle, demonstrating its application.

2. Contenuto della confezione

Verificare che tutti i componenti elencati di seguito siano inclusi nel pacchetto:

• 1x 26" Rear Wheel with Brushless Hub Motor
• 1x Battery Connection Cable
• 1x Electric Controller
• 2x Hand Brakes
• 2x Handle Grips
• 1x acceleratore a pollice
• 1x Controller Bag
• 1x Winding Pipes
• 10 fascette per cavi
• 2x Terminal Boxes
• 1x Spoke Key
• 1x fusibile

Image: Visual representation of all parts included in the conversion kit, such as the motorized wheel, controller, throttle, and brake levers.

3. Specifiche

Image: A table detailing the technical specifications of the conversion kit, including motor power, voltage, wheel dimensions, and compatibility.

4. Compatibilità

This kit is compatible with any 26" bicycle frame that has a 5 5/16" (13.5 cm) rear dropout spacing. It supports both universal disc brakes and V-brakes, allowing you to choose the braking system that best suits your needs.

Image: A diagram illustrating the required rear dropout spacing and notch width for proper installation of the conversion kit on a bicycle frame.

Image: An illustration showing the electric rear wheel seamlessly integrated into a road bike frame, highlighting the conversion.

5. Configurazione e installazione

The electric bike conversion kit includes all necessary components for installation. You can install the kit yourself or seek assistance from a professional bicycle shop.

5.1. Montaggio della ruota

The kit includes a pre-assembled 26" rear wheel with a brushless hub motor. Ensure the tire is properly seated and inflated according to its specifications.

Image: A detailed diagram showing the dimensions of the 26-inch electric bike wheel, including tire diameter, motor hub diameter, rim diameter, tire width, and axial length.

Immagine: un primo piano view of the 26-inch electric bike wheel with the tire, detailing the spoke quantity, screw specification, rim outer width, and rim inner width.

5.2. Controller and Throttle Installation

Mount the electric controller in the provided controller bag and attach it securely to your bike frame. Install the thumb throttle and hand brakes on the handlebars.

Image: A diagram showing the dimensions of the controller bag, designed to house the electric controller on the bicycle frame.

5.3. Cablaggio

Connect all color-coded wires from the motor, controller, throttle, and brakes according to the included wiring diagram. Use the winding pipes and cable ties to organize and secure the cables along the bike frame.

5.4. Collegamento della batteria

A 48V battery (not included) is required to power the kit. Connect the battery using the provided battery connection cable and terminal boxes. Ensure the power is off before connecting the battery.

Image: An illustration reminding users that the battery and charger are not included and must be prepared separately.

5.5. Video di installazione

For visual guidance, refer to the following installation videos:

6. Istruzioni per l'uso

Once installed, ensure all connections are secure and the battery is charged. The thumb throttle features three indicators to display battery status (empty, half, full). This helps prevent unexpected power loss.

The hand brakes are designed to automatically shut off the motor when engaged, saving energy and preventing overheating. This also acts as a safety feature.

7. Manutenzione

Regularly check all electrical connections for tightness and signs of wear. Keep the motor and controller clean and free from debris. Ensure the tire pressure is maintained at the recommended level.

Inspect brake lines and levers periodically for proper function. If any components show significant wear or damage, replace them immediately.

8. Risoluzione Dei Problemi

• Il motore non si innesta: Check battery charge level. Ensure all electrical connections are secure. Verify the throttle is properly connected.
• Motor cutting out: This could be due to low battery or overheating. Check battery status. Ensure the motor is not under excessive load.
• Freni non funzionanti: Inspect brake cables and levers. Ensure they are properly adjusted and connected to the motor cut-off sensors.
• Rumori insoliti: Check for loose components, especially around the motor and wheel. Ensure no cables are rubbing against moving parts.

9. Linee guida di sicurezza

• Quando si va in bicicletta, indossare sempre il casco e l'attrezzatura di sicurezza adeguata.
• Familiarize yourself with local regulations regarding electric bicycles.
• Perform a pre-ride check of brakes, tires, and all electrical connections.
• Avoid riding in heavy rain or extreme weather conditions to prevent damage to electrical components and ensure rider safety.
• Do not modify the kit components unless explicitly instructed by the manufacturer.

Image: A person wearing a helmet while standing next to a bicycle, emphasizing the importance of wearing a helmet for protection.

Image: An urban street scene during rainfall with cars and pedestrians, accompanied by text advising against using the electric bike kit in rainy conditions.

10. Garanzia e supporto

This product comes with no manufacturer warranty. For technical support or inquiries, please refer to the seller or your point of purchase.

CE certified for quality and safety assurance.