Fuceter Control Panel Instruction Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Fuceter Control Panel for Masterbuilt Gravity Series 560, 800, and 1050 outdoor smoker grills. This digital controller board is designed as a direct replacement for original control panels 9904190036, 9904200043, and 9904200004. It offers manual temperature control, meat probe monitoring, and timer functions, without Wi-Fi or Bluetooth connectivity.

2. Compatibilità

The 9904190036 control panel is compatible with Masterbuilt Gravity Series 560, 800, and 1050 outdoor smokers. This includes models such as MB20041220, MB20041320, MB20040220, MB20041020, MB20040122, and MB20040221 grills. It serves as a direct replacement for original control panels 9904190036, 9904200043, and 9904200004.

Figure 2.1: Compatible Masterbuilt Gravity Series Grill Models

3. Cosa c'è nella scatola

Your Fuceter Control Panel kit includes the following components:

• 9904190036 Pannello di controllo
• Two (2) Meat Temperature Probes
• Two (2) Grill Clips
• Two (2) Probe Grommets
• Three (3) Hopper Lid/Door Switch Kits
• Six (6) Switch Mounting Screws
• One (1) 9004190216 Power Adapter

Figura 3.1: Componenti inclusi

4. Configurazione e installazione

Follow these guidelines for safe and proper installation of your new control panel and accessories:

• Prima di effettuare la manutenzione della griglia, staccare sempre la spina dalla presa di corrente.
• Ensure your grill has fully cooled to avoid burns.
• Alcuni componenti possono avere spigoli vivi. Prestare attenzione per evitare lesioni.
• Easily replace the broken parts on the grill with new ones, connect the corresponding wire harnesses and screws.

Figura 4.1: Installazione suview and Safety Notes

4.1. Power Adapter Installation

Connect the IP44 splash-proof power adapter to the control panel and a suitable power outlet. Ensure a secure connection for reliable outdoor performance.

Figure 4.2: Power Adapter Connection

4.2. Lid/Door Switch Installation

Install the hopper lid/door switch kits. These switches are designed to prevent burns, maintain grill temperature, and prevent foreign objects from entering the meat and fuel area.

Figure 4.3: Hopper Lid/Door Switch Installation

4.3. Meat Temperature Probe Installation

Insert the meat temperature probes into the designated ports on the control panel. Use the provided grill clips and probe grommets for secure placement.

Figure 4.4: Meat Temperature Probe

4.4. Guida video all'installazione

5. Istruzioni per l'uso

The control panel allows for manual adjustments of temperature and time. It does not feature Wi-Fi or Bluetooth connectivity.

5.1. Accensione/spegnimento

To power on the controller, press the power button. To power off, press and hold the power button.

Figure 5.1: Power On/Off Controller

5.2. Impostazione della temperatura

1. Premere il pulsante della temperatura.
2. Turn the knob to set the desired temperature.
3. Press the temperature button again to confirm the setting. (Time will automatically set after 3 seconds.)

To set temperature unit (Fahrenheit or Celsius):

1. With power off, hold the set temp button.
2. Premere il pulsante di accensione.
3. The unit powers up with "F" or "C" flashing on the display.
4. Use the knob to select the temperature unit.
5. Press the set temp button to confirm.

Figure 5.2: Setting Temperature

5.3. Setting Time (Countdown/Count Up Timer)

Conto alla rovescia:

1. Premere il pulsante del timer.
2. Turn the knob to set desired hours.
3. Press the timer button to set hours.
4. Turn the knob to set desired minutes.
5. Press the timer button to set minutes. The timer will start.
6. Press the timer button to pause and resume the timer.
7. Press and hold the timer button to reset the timer.

Conto alla rovescia:

1. Press and hold the timer button.
2. The timer will begin counting up from 00:00. The timer will count by Minutes:Seconds and then Hours:Minutes.
3. Press the timer button to pause and resume the timer.
4. Press and hold the timer button to reset the timer.

Figure 5.3: Setting Time

5.4. Setting Meat Probe Temperatures

1. Press the meat probe button and turn the knob to select the desired meat probe (MP1, MP2, MP3, MP4). Press the button again.
2. Premere il pulsante della temperatura.
3. Turn the knob to set the desired temperature.
4. Press the temperature button again to set the temperature. (If the meat probe reaches 300°F, an alarm will sound, and the meat probe must be removed from heat and given time to cool. The meat probe will be damaged if left at this temperature.)
5. Once the set temperature is reached, an alarm will sound. Press any button to clear.

NOTA: The meat probe icon will flash while in setting mode.

Figure 5.4: Setting Meat Probe Temperatures

5.5. Boosting Mode (Models 800 and 1050 only)

On Masterbuilt Gravity Series models 800 and 1050, you may find it takes longer to reach the target temperature. You can single-press the boost button to activate boost mode to accelerate heating. Press it again to cancel.

NOTA: When you have the Model 560, this feature is too powerful and can lead to a rapid temperature increase.

Viewinformazioni sul display: Turning the knob will advance the display through grill temperature, timer, and meat probes (MP1, MP2, MP3, and MP4).

Figure 5.5: Boosting Mode

6. Manutenzione

Regular maintenance ensures the longevity and optimal performance of your control panel. Always ensure the grill is unplugged and completely cooled before performing any maintenance.

• Pulizia: Pulire la superficie del pannello di controllo con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi che potrebbero danneggiare il display o i pulsanti.
• Ispezione: Periodically inspect all connections, including the power adapter, meat probes, and switch wiring, for any signs of wear or damage. Ensure all connections are secure.
• Magazzinaggio: If storing the grill for an extended period, ensure the control panel is clean and dry. Consider covering the grill to protect it from environmental elements.

7. Risoluzione Dei Problemi

Se riscontri problemi con il pannello di controllo, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

• Alarm Message: When a meat temperature probe detects that the meat temperature reaches the set value, the control panel will alarm. Press any key to cancel the alarm.
• Messaggi di errore: If an error message appears on the panel, consult the attached error code information table (if provided with your product) to identify the cause. After identifying and addressing the fault, cut the power to the grill, wait a few seconds, and then restart.

Figure 7.1: Error Message Troubleshooting

8. Specifiche

9. Garanzia e supporto

Specific warranty and support information for this product is not available in the provided data. Please refer to the product packaging or contact the manufacturer directly for details regarding warranty coverage and customer support.