Manuale di istruzioni per il proiettore da esterno con sensore di movimento ALUSSO WL-YDR-230P

1. Introduzione

Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.

Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.

2. Informazioni sulla sicurezza

ATTENZIONE: RISCHIO DI SCOSSA ELETTRICA. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima di procedere all'installazione o alla manutenzione.

• Questo prodotto deve essere installato in conformità al codice di installazione applicabile da una persona a conoscenza della costruzione e del funzionamento del prodotto nonché dei pericoli connessi.
• Use only supplied accessories for installation.
• Ensure the balancing mechanism is secure after installation.
• Non modificare o alterare il prodotto.
• Non installare vicino a materiali infiammabili.
• This fixture is Class II safety-rated and does not require a ground wire.

3. Contenuto della confezione

Prima dell'installazione, verificare che tutti i componenti siano presenti e integri.

Image: Diagram showing the ALUSSO flood light components and included accessories for installation.

• ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
• Staffa di montaggio (1)
• Screws and Wall Anchors (Set)
• Wire Connectors (Yellow Quick-Connects) (Set)
• Waterproof Gasket (1)
• Manuale di istruzioni (1)
• Scheda di garanzia (1)

4. Prodotto finitoview

The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.

Immagine: Oltreview of ALUSSO 30W LED Security Light features.

• Potenza e luminosità: 30W, 3500 Lumens, covering up to 2000 sq. ft.
• Temperatura colore (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
• Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
• Sensore di movimento: 150° wide-angle detection with an adjustable range of 1-40 ft.
• Teste regolabili: Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
• Durata: IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
• Sicurezza: Class II safety-rated, requiring no ground wire.

5. Configurazione e installazione

This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.

1. Spegnimento dell'alimentazione: Individuare l'interruttore automatico che controlla l'apparecchio di illuminazione e disattivare l'alimentazione.
2. Preparare il cablaggio: If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
3. Installare la staffa di montaggio: Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
4. Collegare i fili: Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
5. Allega dispositivo: Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
6. Regola le teste delle luci: Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
7. Altezza di installazione consigliata: For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).

Image: Installation steps for the ALUSSO flood light.

Image: Soffit Mounted and Wall Mounted configurations.

6. Istruzioni per l'uso

Your ALUSSO flood light offers adjustable settings for optimal performance.

6.1. Regolazione della temperatura del colore (CCT)

A dip switch located on the back of the light fixture allows you to select the desired color temperature:

Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).

• WW (bianco caldo): 3000K
• NW (Natural White): 4000K
• CW (Daylight): 6500K

Note: Adjust the CCT switch before mounting the fixture for easier access.

6.2. Selezione della modalità operativa

A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:

Image: Three work modes of the ALUSSO flood light.

• D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
• AUTO Mode (Motion Mode): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
• ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.

6.3. Auto Mode Adjustments

When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:

Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.

• LUX (Sensibilità alla luminosità): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
• SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
• TEMPO (Durata): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).

Video: Official ALUSSO product video demonstrating features and modes.

7. Manutenzione

To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:

• Pulizia: Pulire periodicamente l'apparecchio con un panno morbido eamp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o i componenti elettrici.
• Ispezione: Ispezionare regolarmente l'apparecchio per verificare eventuali segni di danni, collegamenti allentati o usura. Risolvere tempestivamente eventuali problemi.
• Pulizia del sensore: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure accurate detection.

Image: ALUSSO flood light is durable in all weather conditions.

8. Risoluzione Dei Problemi

Se riscontri problemi con il tuo proiettore, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

9. Specifiche

10. Garanzia e supporto

ALUSSO provides a Garanzia di 3 anno for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.

For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:

• E-mail: service-support@alussolighting.com
• Websito: www.alussolighting.com