BONTANNY BO-300

BONTANNY Red Light Therapy Device BO-300 User Manual

Model: BO-300 | Brand: BONTANNY

Introduzione

This manual provides essential information for the safe and effective operation of your BONTANNY BO-300 Red Light Therapy Device. Please read it thoroughly before use and retain it for future reference.

BONTANNY BO-300 Red Light Therapy Device

Image: BONTANNY BO-300 Red Light Therapy Device, showcasing its sleek design and LED panel.

Informazioni sulla sicurezza

For your safety and to ensure proper device function, observe the following precautions:

  • Protezione degli occhi: Always place the provided eye protection over your eyes before powering on the device.
  • Posizionamento: Ensure the device is placed on a stable, flat surface or securely mounted according to instructions.
  • Fonte di energia: Use only the provided 1.8m power cord and connect to a compatible 12V (DC) power outlet.
  • Ventilazione: Do not obstruct the cooling fans or ventilation openings on the device.
  • Esposizione all'acqua: Tenere il dispositivo lontano dall'acqua o dalamp ambienti.
  • Bambini e animali domestici: Tenere fuori dalla portata dei bambini e degli animali domestici.
  • Consulenza medica: Consult a healthcare professional before using this device if you have any medical conditions, are pregnant, or are taking medications.

Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

  • BONTANNY BO-300 Red Light Therapy Device
  • Manuale d'uso
  • Cavo di alimentazione da 1.8 m
  • Remote Control (23A 12V battery not included)
  • Occhiali di protezione per gli occhi
  • Adjustable Stand (pre-attached)
  • Suspension Kit (for hanging)
  • Gancio porta
  • Pedane
Included accessories for BONTANNY BO-300 Red Light Therapy Device

Image: All accessories included with the BONTANNY BO-300 device, such as the user manual, power cord, remote control, eye protection, and mounting hardware.

Impostare

  1. Disimballare: Rimuovere con attenzione tutti i componenti dalla confezione.
  2. Posizionamento:
    • Utilizzo da tavolo: Extend the adjustable stand on the back of the device to position it on a flat surface.
    • Uso sospeso: Attach the suspension kit and door hook to the device and a suitable door or wall, ensuring it is securely fastened.
  3. Collegamento elettrico: Connect the 1.8m power cord to the device's power input and then plug it into a standard electrical outlet.
  4. Batteria del telecomando: Inserire una batteria da 23A 12V (non inclusa) nel telecomando.

Istruzioni per l'uso

The BONTANNY BO-300 offers flexible control via its intelligent operation panel or the remote control.

  1. Accensione: Flip the main power switch on the device to the 'ON' position. The digital display will illuminate.
  2. Seleziona modalità: Use the 'RED' button to activate Red Light (630nm & 660nm), the 'NIR' button for Near-Infrared Light (810nm, 830nm & 850nm), or activate both simultaneously.
  3. Imposta timer: Use the '+' and '-' buttons on the control panel or remote to adjust the treatment time from 1 to 30 minutes. The device features an auto shut-off function.
  4. Inizia il trattamento: Once the mode and timer are set, the device will begin emitting light.
  5. Spegni: To end a session early or after the timer completes, flip the main power switch to 'OFF'.
BONTANNY BO-300 control panel and remote control

Image: Close-up of the device's control panel and remote control, highlighting the mode selection and timer functions.

Video ufficiali del prodotto:

Video: BONTANNY Red Light Therapy - A seller demonstration of the device's features and operation.

Video: Finally a red light therapy panel that comes with a remote control - A seller highlights the convenience of the remote control.

Wavelengths and Modes

The BO-300 device utilizes 5 scientifically proven wavelengths for comprehensive therapeutic effects:

  • Red Light (630nm & 660nm): Primarily targets skin health, promoting collagen production and reducing fine lines.
  • Near-Infrared Light (810nm, 830nm & 850nm): Penetrates deeper into tissues, supporting muscle recovery, pain relief, and cellular repair.

Each LED features a 60-degree beam angle for even and widespread penetration.

Diagram of 5 wavelengths and their penetration into skin layers

Image: Visual representation of the 5 distinct wavelengths (630nm, 660nm, 810nm, 830nm, 850nm) and their varying penetration depths into skin layers.

Linee guida per l'utilizzo

Per risultati ottimali, seguire queste linee guida:

  • Durata della sessione: Typically 15-20 minutes per session. Do not exceed 30 minutes.
  • Distanza: Position the device approximately 6 inches (15 cm) from the target area for maximum irradiance (131mW/cm²).
  • Frequenza: Use 4-5 times per week for consistent benefits.
  • Area di copertura: The BO-300 provides a 14x12-inch coverage area at 6 inches, suitable for various body parts.
Irradiance and coverage area at different distances from the BONTANNY BO-300 device

Image: Chart illustrating the irradiance levels and coverage areas at various distances (3, 6, 12, 18 inches) from the device.

Video ufficiali del prodotto:

Video: Using 5 Wavelength Red Light & NIR for a Skin Glow Up - A seller demonstrates the device's application for skin health.

Video: Watch what this red light Therapy lamp can do - A seller showcases the device's benefits for skin and anti-aging.

Manutenzione

  • Pulizia: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
  • Magazzinaggio: Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta quando non viene utilizzato.
  • Ispezione: Controllare regolarmente il cavo di alimentazione per verificare che non sia danneggiato. Non utilizzare se il cavo è sfilacciato o danneggiato.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Il dispositivo non si accende.Power cord not connected properly or no power from outlet.Controllare il collegamento del cavo di alimentazione. Testare la presa con un altro dispositivo.
Le luci sono fioche o tremolanti.Power supply issue or device malfunction.Assicurare un'alimentazione elettrica stabile. Se il problema persiste, contattare l'assistenza clienti.
Telecomando non funzionante.La batteria è scarica o non è inserita correttamente.Replace 23A 12V battery. Ensure correct polarity.

Specifiche

  • Numero modello: BO-300
  • Dimensioni del prodotto: 8.7 x 2.4 x 13.2 pollici
  • Peso dell'articolo: 7.9 libbre
  • Numero di sorgenti luminose: 60 LED a doppio chip
  • Lunghezze d'onda: 630nm, 660nm (Red Light); 810nm, 830nm, 850nm (Near-Infrared Light)
  • Irraggiamento: 131mW/cm² a 6 pollici
  • Angolo del fascio: 60 gradi
  • Voltage: 12 Volt (CC)
  • Timer: 1-30 minuti con spegnimento automatico
  • Controllare: On-device panel and remote control
  • Raffreddamento: Integrated cooling fans
BONTANNY BO-300 dimensions and key features

Image: Visual representation of the device's dimensions, weight, LED count, and number of wavelengths.

Garanzia e supporto

BONTANNY offers a 3-year promise for the BO-300 device, ensuring quality and durability. For any questions, concerns, or technical support, please contact BONTANNY customer service. Refer to the product packaging or official websito per i contatti.

A 30-day testing period is provided for peace of mind.

Note importanti

Disclaimer legale: Le dichiarazioni relative agli integratori alimentari non sono state valutate dalla FDA e non intendono diagnosticare, trattare, curare o prevenire alcuna malattia o condizione di salute.