1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kariwust Power Recliner 5-Button Hand Control with USB, Model 23300131X000. Please read this guide thoroughly before installation and use to ensure proper function and safety. This replacement hand control is designed to operate both the power headrest and power backrest features of compatible power recliners.
2. Prodotto finitoview
The Kariwust Model 23300131X000 hand control features a 5-button layout for intuitive control of your recliner's functions. It includes a convenient USB port for charging compatible devices. The controller cable measures approximately 6.6 feet (2 meters) in length, providing ampsono adatti alla maggior parte delle configurazioni.
Figura 2.1: Sopraview of the Kariwust 5-Button Power Recliner Hand Control, showing the control unit, USB port, and attached cables.
3. Compatibilità
This hand control (Model 23300131X000) is a direct replacement and can also replace Model 23300071X000. It is essential to verify the connector types on your existing recliner before purchasing or installing this replacement part. This switch features two wires and plugs: UN Connettore maschio a 5 pin for the main motor (footrest) and a Connettore femmina a 2 pin for the head motor (headrest). If your recliner's connectors differ from these specifications, this hand control will not be compatible.
Figura 3.1: Dettagliato view of the 5-pin (footrest) and 2-pin (headrest) connectors. Ensure these match your recliner's existing connections.
4. Configurazione e installazione
- Scollegare l'alimentazione: Before beginning installation, ensure your recliner is unplugged from the main power outlet to prevent electrical shock.
- Locate Existing Connections: Identify the existing hand control's cables and where they connect to the recliner's motors. Typically, one cable connects to the main motor (often for the footrest/recline) and another to the headrest motor.
- Rimuovi vecchio controllo: Carefully disconnect the old hand control's plugs from the corresponding motor connections. Note their positions.
- Connetti nuovo controllo:
- Collegare il Connettore maschio a 5 pin from the new hand control to the main motor's receptacle (typically for the footrest/recline function).
- Collegare il Connettore femmina a 2 pin from the new hand control to the head motor's receptacle (for the headrest function).
- Secure Control: Route the cable neatly and secure the hand control in its designated position on the recliner.
- Ripristina alimentazione: Plug your recliner back into the main power outlet.
- Funzionalità di prova: Test all buttons on the new hand control to ensure the headrest and backrest functions operate correctly.
If you encounter any difficulties, refer to your recliner's original instruction manual or consult a qualified technician.
5. Funzionamento
The 5-button hand control allows for independent adjustment of your recliner's headrest and backrest, as well as overall recline movement.
- Headrest Control: Use the dedicated buttons (usually top two) to move the power headrest up or down.
- Backrest Control: Use the dedicated buttons (usually bottom two) to adjust the power backrest forward or backward.
- Overall Recline/Return: The central button typically controls the main recline mechanism, allowing the chair to recline or return to an upright position.
- Porta di ricarica USB: The integrated USB port (DC 5V 2.1A output) can be used to charge mobile phones, tablets, or other compatible USB-powered devices. Simply connect your device's USB cable to the port.
6. Manutenzione
- Pulizia: Wipe the hand control surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the plastic.
- Esposizione al liquido: Keep the hand control away from liquids. In case of spills, immediately disconnect power to the recliner and dry the control thoroughly.
- Ispezione dei cavi: Periodically inspect the cable for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the hand control.
- Verifica della connessione: Ensure all plugs remain securely connected to the motors. Loose connections can lead to intermittent operation.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Hand control does not respond. |
|
|
| USB port not charging device. |
|
|
8. Specifiche
- Marca: Kariwust
- Nome modello: Recliner Switch
- Numero modello articolo: 23300131X000
- Sostituzione per: Model 23300071X000 L
- Tipo di controllo: 5-Button (Power Headrest, Power Backrest)
- Connettori: 5-Pin Male (Main Motor), 2-Pin Female (Head Motor)
- Lunghezza del cavo: Circa 6.6 piedi (2 metri)
- Uscita USB: DC 5V, 2.1A
- Input (from switch label): DC 29V, 2A
- Materiale: Plastica
- Colore: Silver (buttons), Beige/Cream (housing)
- Approximate Switch Face Dimensions: 6.6 cm (2.6 inches) width x 5 cm (2 inches) height
- Approximate Switch Body Depth: 3.8 cm (1.5 pollici)
- Peso dell'articolo: 6.9 once (0.43 libbre)
Figura 8.1: Front dimensions of the hand control unit.
Figura 8.2: Lato view and depth measurement of the hand control unit, with input/output details.
9. Informazioni sulla sicurezza
- Sempre scollegare l'alimentazione to the recliner before performing any installation, maintenance, or inspection.
- Garantire compatibilità with your existing chair before installation. Incorrect connections can cause damage to the hand control or the recliner's motors.
- Non fare overload the USB port. Overloading can lead to overheating and potential damage to the chair's power system or the connected device.
- Keep the hand control and cables away from moving parts of the recliner to prevent pinching or damage.
- Questo prodotto è destinato a solo per uso interno.
10. Garanzia e supporto
Per informazioni sulla copertura della garanzia o sull'assistenza tecnica, consultare la documentazione di acquisto o contattare direttamente il venditore. Conservare la prova d'acquisto per eventuali reclami in garanzia.