XPG INVADER X MINI ATX Mid Tower PC Case Instruction Manual

Introduzione

Welcome to the XPG INVADER X MINI ATX Mid Tower PC Case instruction manual. This guide provides detailed information on the installation, operation, and maintenance of your new PC case. The INVADER X MINI is designed for compact, stylish, and powerful gaming rig builds, offering impressive compatibility with ATX motherboards and optimal airflow with five pre-installed ARGB fans.

Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation.

Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione:

• XPG INVADER X MINI PC Case
• Scatola degli accessori (viti, fascette, distanziatori, ecc.)
• Manuale dell'utente (questo documento)

Precauzioni di sicurezza

• Scollegare sempre l'alimentatore dalla presa a muro prima di installare o rimuovere qualsiasi componente.
• Maneggiare i componenti con cura per evitare danni.
• Indossare un braccialetto antistatico per evitare danni causati dalle scariche elettrostatiche (ESD) ai componenti sensibili.
• Tenere le parti di piccole dimensioni e le viti lontano dalla portata dei bambini.

Configurazione e installazione

1. Preparazione del caso

Carefully remove the case from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the case and sliding the panels off.

Immagine: lato frontale view of the XPG INVADER X MINI PC case, showcasing its tempered glass panels and the vibrant ARGB fans. This view highlights the compact elegance and panoramic design.

2. Installazione della scheda madre

1. Installare la schermatura I/O nell'apertura del vassoio della scheda madre dall'interno del case.
2. Align your ATX motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Fissare la scheda madre utilizzando le viti fornite.

Immagine: Interna view of the PC case, illustrating the spacious motherboard tray and various mounting points for components. This image helps visualize the layout for component installation.

3. Installazione dell'unità di alimentazione (PSU)

The INVADER X MINI supports rear-mount power supplies. Slide your PSU into the designated compartment at the rear bottom of the case and secure it with screws from the outside.

Image: Rear internal view of the PC case, highlighting the power supply mounting area and cable routing channels behind the motherboard tray. This demonstrates the design for clean cable management.

4. Installazione dell'unità di archiviazione

Install 2.5" SSDs or 3.5" HDDs into the designated drive bays. Refer to the accessory box for specific mounting hardware.

Immagine: Interno dettagliato view of the PC case, focusing on the drive bays and fan mounting locations. This helps users identify where to install storage devices and additional cooling.

5. Installazione della scheda grafica (GPU) e della scheda di espansione

Remove the necessary PCIe slot covers from the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

Image: Rear exterior view of the PC case, showing the PCIe expansion slots, the rear exhaust fan, and the I/O panel cutout. This view is crucial for installing expansion cards and connecting peripherals.

6. Gestione dei cavi

Utilizzate i fori per il passaggio dei cavi e i punti di fissaggio dietro il vassoio della scheda madre per gestire i cavi in ​​modo ordinato. Questo migliora il flusso d'aria e l'estetica.

Image: Side internal view of the PC case, illustrating the pre-installed ARGB fans and the internal layout for component placement. This perspective helps in planning component installation and cable routing.

7. Collegamento dell'I/O del pannello frontale

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Image: Top-down internal view of the PC case, showing the top fan mounts and the overall internal structure. This view is useful for understanding top-mounted radiator or fan installations.

Operating the PC Case

Accensione

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the PC. Press the power button on the front panel of the case to turn on your system.

Controllo della ventola ARGB

The XPG INVADER X MINI comes with five pre-installed ARGB fans. These fans can be controlled via your motherboard's ARGB software (if compatible) or a dedicated ARGB controller (if included or purchased separately). Refer to your motherboard manual or ARGB controller instructions for specific lighting effects and synchronization.

Manutenzione

Pulizia del filtro antipolvere

The case is equipped with dust filters to prevent dust buildup inside. Regularly clean these filters (typically located at the top, front, and bottom) by removing them and gently brushing or washing them with water. Ensure they are completely dry before re-installing.

Pulizia generale

Utilizzare un morbido, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass panels.

Risoluzione dei problemi

• Il sistema non si accende: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check the power switch connection to the motherboard. Verify the PSU is switched on.
• Le ventole non girano/ARGB non si accende: Check fan power connections to the motherboard or fan controller. Ensure ARGB headers are correctly connected and software is configured.
• Nessuna uscita di visualizzazione: Confirm the graphics card is properly seated in its PCIe slot and has adequate power. Ensure the monitor cable is connected to the graphics card, not the motherboard's integrated graphics ports (unless using integrated graphics).
• Surriscaldamento: Verify all fans are spinning correctly and are oriented for optimal airflow (intake/exhaust). Ensure CPU cooler and GPU fans are functioning. Clean dust filters.

Specifiche

Garanzia e supporto

XPG products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official XPG websito.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact XPG customer service through their official websito o le informazioni di contatto fornite nella documentazione del prodotto.

Please have your product model number (INVADER X MINI) and serial number ready when contacting support.