Introduzione
This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your roborock QV 35S Robot Vacuum and Mop. Please read this manual thoroughly before using the product and retain it for future reference.
Figura 1: The roborock QV 35S Robot Vacuum and Mop with its multifunction docking station and companion app interface.
Informazioni importanti sulla sicurezza
Quando si utilizzano apparecchi elettrici, seguire sempre le precauzioni di sicurezza di base per ridurre il rischio di incendi, scosse elettriche e lesioni.
- Leggere tutte le istruzioni prima di utilizzare l'apparecchio.
- Non permettere ai bambini di utilizzare il robot. Sorvegliare i bambini e gli animali domestici quando il robot è in funzione.
- Garantire la potenza voltage corrisponde al volumetage contrassegnato sulla base di ricarica.
- Non utilizzare il robot in ambienti con fiamme libere o oggetti fragili.
- Tenere capelli, abiti larghi, dita e tutte le parti del corpo lontano dalle aperture e dalle parti mobili.
- Utilizzare esclusivamente la base di ricarica fornita dal produttore.
Contenuto della confezione
Verificare che tutti i componenti siano presenti nella confezione:
- roborock QV 35S Robot Vacuum and Mop
- Docking station multifunzione
- Mop Pads (two rotating)
- Cavo di alimentazione
- Manuale d'uso
Impostare
1. Docking Station Placement
Place the multifunction docking station on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock for optimal robot navigation. Connect the power cable to the dock and plug it into a power outlet.
2. Ricarica iniziale
Place the robot onto the charging contacts of the docking station. The robot will automatically power on and begin charging. Allow the robot to fully charge before its first use.
3. Connessione all'app
Download the roborock app from your mobile device's app store. Open the app and follow the on-screen instructions to add your roborock QV 35S. A 2.4 GHz Wi-Fi network is required for app connection.
Figura 2: The roborock app provides comprehensive control and customization options for your robot.
Istruzioni per l'uso
1. Mappatura iniziale
For the first cleaning cycle, allow the robot to map your home. The PreciSense LiDAR navigation system will scan 360° to create detailed maps for efficient route planning. The robot supports up to 4 floor maps, automatically switching between them for multi-story homes.
Figura 3: The robot utilizes LiDAR technology for precise navigation and mapping, enabling efficient cleaning routes.
2. Modalità di pulizia
The roborock QV 35S offers various cleaning modes accessible via the app:
- Solo vuoto: Per la rimozione di detriti secchi.
- Solo mocio: Per la pulizia a umido di pavimenti duri.
- Aspirapolvere e lavapavimenti: Aspirazione e lavaggio simultanei.
- Pulizia personalizzata: Definire stanze o zone specifiche per la pulizia.
3. Suction and Mopping Features
The robot features 10,000 Pa HyperForce suction for deep cleaning and dual spinning mops that rotate at up to 200 RPM. The mops can lift 10 mm to avoid wetting carpets during cleaning. Water flow can be adjusted in 30 levels via the app.
Figura 4: The robot's powerful 10,000 Pa HyperForce suction effectively removes debris from various surfaces.
Figura 5: Dual spinning mops provide effective wet cleaning, with an automatic lift feature for carpets.
4. Evitare gli ostacoli
The reactive technical obstacle avoidance system uses structured light to detect and navigate around obstacles, even in cluttered environments. The robot can suggest "No-Go Zones" for areas where it might get stuck, such as under chairs or tables.
Figura 6: The robot's advanced sensors enable it to identify and bypass common household obstacles.
Manutenzione
1. Multifunction Dock Maintenance
The multifunction dock automatically washes and dries the mop pads, refills the water tank, and empties the dustbin. The dustbag in the dock can hold debris for over 7 weeks. Regularly check and empty the dustbag as needed. The entire docking station is detachable for easy and thorough cleaning to prevent sludge and dirt buildup.
Figura 7: The multifunction dock simplifies maintenance with automated cleaning and emptying features.
2. Pulizia della spazzola principale e laterale
The robot features a dual anti-tangle system with a rubberized floating main brush and a unique arc-shaped side brush. While designed to prevent tangles, it is recommended to periodically check and clean the brushes, especially if you have pets with long hair. Remove any hair or debris wrapped around the brushes. The improved side brush is SGS-certified for a 0% entanglement rate.
Figura 8: The anti-tangle brush system minimizes hair entanglement, but periodic inspection is advised. SGS Certification Details
3. Pulizia del panno per mocio
The mop pads are automatically washed and dried by the docking station. For optimal performance, it is recommended to occasionally remove and hand-wash the mop pads with water to remove any accumulated dirt or residue.
4. Pulizia del filtro
The robot's internal filter should be cleaned regularly. Tap out dust and rinse with water. Ensure the filter is completely dry before reinserting it into the robot.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Robot not connecting to Wi-Fi. | Password Wi-Fi errata, rete a 5 GHz o segnale debole. | Ensure you are using a 2.4 GHz Wi-Fi network. Verify the password. Move the robot closer to the router. |
| Il robot si blocca spesso. | Small obstacles, loose cables, or tight spaces. | Clear the area of small objects and cables. Use the app to define "No-Go Zones" for problematic areas. |
| Scarsa capacità di aspirazione. | Full dustbin, clogged filter, or tangled main brush. | Empty the dustbin. Clean or replace the filter. Remove any hair or debris from the main brush. |
| I panni per il mocio non puliscono in modo efficace. | Dirty mop pads, insufficient water flow, or empty water tank. | Ensure mop pads are clean. Adjust water flow settings in the app. Refill the water tank. |
| Robot displays "move to new location and restart" error. | Robot is in an unfamiliar or problematic location, or a sensor issue. | Manually move the robot to a clear, open area and restart it. If the issue persists, clean all sensors and ensure no obstructions. |
Specifiche
- Marca: Roborock
- Modello: QV 35S
- Colore: Roborock Qv 35s Black
- Robot Dimensions (L x W x H): Circa 35 x 35 x 9.65 cm (13.8 x 13.8 x 3.8 pollici)
- Dock Dimensions (L x W x H): 35 x 48.7 x 52.1 cm (13.8 x 19.2 x 20.5 pollici)
- Peso dell'articolo: 16 Kilograms (including dock)
- Potenza di aspirazione: 10,000 Pa HyperForce
- Sistema di lavaggio: Dual Spinning Mops (up to 200 RPM), 10mm Auto Mop Lift
- Navigazione: Navigazione e mappatura LiDAR PreciSense
- Evitare gli ostacoli: Reactive Technical Obstacle Avoidance (structured light)
- Controllo app: Yes (roborock app, requires 2.4 GHz Wi-Fi)
- Controllo vocale: Compatible with Amazon Echo, Google Home
- Caratteristiche speciali: 360-degree rotation, removable container, pet hair suction, advanced custom cleaning, precise laser mapping, automatic shutdown.
- Componenti inclusi: Docking station, water tank, mop pads, two rotating brushes.
Garanzia e supporto
Per informazioni sulla garanzia, supporto tecnico o richieste di assistenza, fare riferimento al sito ufficiale roborock websito o contattare direttamente il servizio clienti.
You can find more information and support on the official roborock store page: roborock Official Store