X-PRO Hawk 60 Gas Powered Dirt Bike Instruction Manual

1. Introduzione

Thank you for choosing the X-PRO Hawk 60 Gas Powered Dirt Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new dirt bike. Please read this manual thoroughly before use to ensure proper handling and to maximize your riding experience. The X-PRO Hawk 60 is designed for recreational off-road use, featuring a powerful 58cc 4-stroke engine, CVT transmission, electric start, and disc brakes, making it suitable for young riders learning to ride.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Improper use of this motorcycle can cause serious injury or death. Always wear a helmet and appropriate safety gear, including gloves, long pants, and sturdy footwear. Never operate this vehicle on public roads. Never operate under the influence of drugs or alcohol. Never carry passengers. This dirt bike is not intended for sale in California.

AVVERTIMENTO: Apply throttle gradually from a standing/starting position. If full throttle is applied from a standing/starting position, the front wheel of the motorcycle can raise up, causing you to be thrown off the motorcycle, resulting in serious injury or death.

AVVERTIMENTO: This vehicle is intended for riders SOTTO I 16 years of age. Never operate over speeds too fast for your skill or road conditions.

3. Contenuto della confezione

Upon opening the package, ensure all components are present and undamaged. The package should contain:

• X-PRO Hawk 60 Dirt Bike (partially assembled)
• Handlebar brackets
• Ruote anteriori e posteriori
• Componenti dei freni
• Targa
• Parafango
• Ruote di allenamento
• Toolkit (containing necessary wrenches, screwdrivers, etc.)
• Manuale d'uso

4. Installazione e assemblaggio

Some assembly is required before operating your X-PRO Hawk 60 dirt bike. Please follow these steps carefully:

1. Disimballaggio: Carefully open the packing box and remove the motorcycle and all accessories. Ensure you have all necessary tools from the toolkit.
2. Installazione della ruota anteriore: Remove the front brake caliper to prepare for installing the front wheel. Install the front wheel by placing the spacer before tightening the fixed nut. Reinstall the front brake caliper.
3. Installazione del manubrio: Install the handlebar onto the triple clamp using the provided bolts and clamps. Ensure it is centered and securely tightened.
4. Installazione dell'ammortizzatore posteriore: Install the rear shock absorber, ensuring all bolts are tightened securely.
5. Front Fender and Number Plate: Install the front fender and then attach the number plate to the front of the handlebars.
6. Rotelle di allenamento: Attach the training wheels to the rear axle, ensuring they are securely fastened and provide proper balance. Find the proper fit of the extension. Fix one side then tighten the other side till they all tighten. Double-check extension and tightness. Ensure training wheels are well-fixed.
7. Fuel Line: For safety during transport, the airvent hose has been pulled out. Remove the rubber cap and insert the hose back into the airvent.
8. Handlebar Pad: Install the handlebar pad for added safety.
9. Collegamento della batteria: Connect the battery terminals. Ensure the positive (+) terminal (red wire) is connected first, followed by the negative (-) terminal (black/green wire).

Video di montaggio:

5. Istruzioni per l'uso

The X-PRO Hawk 60 features a simple, gearless operation, making it ideal for beginners.

1. Miscela di carburante: This is a 2-stroke engine. Always use a 25:1 gas-to-oil mixture. Refer to the fuel container for proper mixing ratios.
2. Accensione: Insert the key into the ignition switch (located on the side of the bike) and turn it to the 'ON' position.
3. Valvola del carburante: Locate the fuel valve (petcock) near the carburetor and turn it to the 'ON' position.
4. Avviare il motore: Use the pull starter to ignite the engine. A single pull should be sufficient.
5. Controllo dell'acceleratore: The bike operates without gears. Once started, gently twist the throttle on the right handlebar to accelerate.
6. Frenata: Use the brake levers on both handlebars to slow down and stop.
7. Interruttore di spegnimento: The kill switch (red button on the handlebar) will immediately shut off the engine. There is also a safety lanyard that will pull off and kill the engine if the rider falls.

6. Manutenzione

Una manutenzione regolare è fondamentale per la longevità e il funzionamento sicuro della tua moto da cross.

• Sistema di alimentazione: Regularly check the fuel lines and carburetor for any leaks or blockages. Ensure the correct fuel mixture is always used.
• Freni: Inspect brake pads and cables regularly. Adjust or replace as needed to ensure optimal braking performance.
• Pneumatici: Check tire pressure before each ride. Ensure tires are free from punctures or excessive wear.
• Catena: Mantenere la catena di trasmissione pulita, lubrificata e correttamente tesa.
• Elementi di fissaggio: Periodically check all nuts, bolts, and fasteners for tightness. Tighten any loose components.
• Filtro dell'aria: Clean or replace the air filter regularly to maintain engine performance.

7. Specifiche

8. Garanzia

This product comes with a 1-month warranty. Please refer to the warranty card included in your package for full details and terms.

9. Supporto

For any questions, technical assistance, or parts inquiries, please contact X-PRO customer support. Our dedicated team is committed to providing fast and reliable support to ensure your satisfaction and a smooth riding experience.