LogiLink HDW0111 Wireless HDMI Presentation Kit User Manual

Introduzione

The LogiLink HDW0111 Wireless HDMI Presentation Kit provides a convenient solution for transmitting HDMI video and audio signals wirelessly. This kit is designed for BYOD (Bring Your Own Device) environments, enabling easy content sharing in meeting rooms, conference halls, or educational settings. It supports Ultra HD 4K/60Hz resolution and can transmit signals up to 50 meters in clear line of sight. The system is plug-and-play, requiring no additional software installation for most devices.

LogiLink HDW0111 Wireless HDMI Presentation Kit in use during a meeting

Image: The LogiLink HDW0111 Wireless HDMI Presentation Kit facilitating a meeting presentation.

Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

1x LogiLink HDW0111 Receiver Unit (RX)
1x LogiLink HDW0111 Transmitter Unit (TX)
2x USB-C to USB-A Power Cables
2x HDMI Extension Cables
1x Manuale utente

LogiLink HDW0111 Transmitter and Receiver Units

Image: The LogiLink HDW0111 Transmitter (TX) and Receiver (RX) units.

Prodotto finitoview

The LogiLink HDW0111 system consists of two main components: a Transmitter (TX) and a Receiver (RX).

Trasmettitore (TX)

The Transmitter unit connects to your source device (e.g., laptop, PC, smartphone, tablet) via an HDMI port. It captures the video and audio signal and transmits it wirelessly to the Receiver.

Connettore HDMI: Connects to the source device.
Porta USB-C: For power supply (DC 5V/0.5A required).
Pulsante funzione: Used for pairing and switching between multiple transmitters.
Indicatore di stato: Visualizza lo stato della connessione.

Ricevitore (RX)

The Receiver unit connects to your display device (e.g., TV, projector, monitor) via an HDMI port. It receives the wireless signal from the Transmitter and outputs the video and audio.

Connettore HDMI: Connects to the display device.
Porta USB-C: For power supply (DC 5V/0.5A required).
Pulsante funzione: Used for pairing and managing connections.
Indicatore di stato: Visualizza lo stato della connessione.

LogiLink HDW0111 Wireless HDMI Kit Components

Immagine: Primo piano view of the LogiLink HDW0111 Transmitter and Receiver units, showing ports and indicators.

Istruzioni di installazione

Collegare il ricevitore (RX):
- Plug the LogiLink HDW0111 Receiver (RX) into an available HDMI input port on your display device (TV, projector, monitor). Use an HDMI extension cable if needed for better fit or signal path.
- Connect one of the provided USB-C to USB-A power cables to the USB-C port on the Receiver. Plug the USB-A end into a USB power source (e.g., a USB port on your display device, a USB wall adapter, or a power bank). Ensure the power source provides at least 5V/0.5A.
- Power on your display device and select the correct HDMI input source.
Collegare il trasmettitore (TX):
- Plug the LogiLink HDW0111 Transmitter (TX) into an available HDMI output port on your source device (e.g., laptop, PC). Use an HDMI extension cable if needed.
- Connect the second USB-C to USB-A power cable to the USB-C port on the Transmitter. Plug the USB-A end into a USB power source (e.g., a USB port on your laptop, a USB wall adapter, or a power bank). Ensure the power source provides at least 5V/0.5A.
Initial Pairing (if necessary):
- The Transmitter and Receiver units are usually pre-paired from the factory. If they do not connect automatically, press the function button on both the Transmitter and Receiver simultaneously for a few seconds until their status indicators show a successful connection (e.g., solid blue light).

Istruzioni per l'uso

Avviare la trasmissione:
- Once both the Transmitter and Receiver are powered on and connected, the status indicators should show a stable connection.
- Your source device's screen content should automatically appear on the connected display.
Switching Transmitters (for multiple TX units):
- The system supports up to 16 Transmitter units (additional TX units sold separately, model HDW0111AT).
- To switch between active transmitters, simply press the function button on the desired Transmitter unit. The Receiver will automatically switch to display the content from that Transmitter.
Condivisione dispositivi mobili:
- For smartphones and tablets, you can share content directly via your device's operating system's casting features (e.g., Miracast, AirPlay, Google Cast). No additional app is required.
- Ensure your mobile device is connected to the same Wi-Fi network as the LogiLink HDW0111 Receiver, or follow your device's specific instructions for screen mirroring to a wireless display.
Risparmio energetico:
- The units can be powered directly from the HDMI port if the source/display provides sufficient power (0.5A). For stable operation, especially with longer cables or high resolutions, using the dedicated USB power cable is recommended.

Manutenzione

Pulizia: Per pulire le unità, utilizzare un panno morbido e asciutto. Non utilizzare detergenti liquidi o spray.
Magazzinaggio: Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
Gestione: Avoid dropping or subjecting the units to strong impacts. Do not attempt to disassemble or modify the device, as this will void the warranty.
Energia: Always use the provided power cables or compatible 5V/0.5A USB power sources.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Nessun segnale sul display.	Unità non alimentate. È stato selezionato un ingresso HDMI errato sul display. Unità non accoppiate. Il dispositivo sorgente non emette il segnale. Distanza eccessiva o ostacoli.	Ensure both TX and RX units are properly powered via USB-C. Seleziona l'ingresso HDMI corretto sul tuo televisore/monitor. Press the function button on both TX and RX to re-pair. Check source device's display settings (e.g., extend/duplicate display). Reduce distance between TX and RX, remove obstructions.
Segnale intermittente o sfarfallio.	Alimentazione elettrica debole. Interferenze da altri dispositivi wireless. Distance/obstructions. High resolution/refresh rate.	Garantire un'alimentazione stabile da 5 V/0.5 A per entrambe le unità. Move units away from other Wi-Fi routers or wireless devices. Reduce distance, ensure clear line of sight. Prova una risoluzione o una frequenza di aggiornamento più bassa sul dispositivo sorgente.
Audio ma non video, o viceversa.	Problema di compatibilità HDCP. Impostazioni di output del dispositivo sorgente.	Ensure both source and display devices support HDCP 1.4/2.2. Check audio/video output settings on your source device.
Cannot connect more than one transmitter.	Transmitters not paired. Maximum transmitters reached.	Ensure each additional transmitter is paired with the receiver. The system supports up to 16 transmitters.

Specifiche

Modello: HDW0111
Wireless standard: 802.11ac
Standard HDMI: Uscita HDMI 2.0
Larghezza di banda: 18 Gbps (6 Gbit/s per line at 600 MHz)
Distanza massima di trasmissione: Fino a 50 metri (linea di vista)
Risoluzioni supportate: Up to 4K (3840x2160) @ 60Hz, Full HD, Full 3D
Conformità HDCP: HDCP 1.4 e 2.2
Supporto audio: Uncompressed LPCM 7.1 (up to 48 kHz), Compressed DTS, Dolby Digital (including DTS-HD Master Audio, Dolby TrueHD)
Latenza: Near-zero
Potenza in ingresso: DC 5V/0.5A (via USB-C)
Materiale dell'alloggiamento: Metallo
Max Transmitters: Up to 16 (with additional HDW0111AT units)
Dispositivi compatibili: TVs, Personal Computers, Smartphones, Tablets, Laptops
Codec video: H.264, H.265/HEVC

Garanzia e supporto

LogiLink products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official LogiLink websito.

Disponibilità ricambi: Non vengono fornite informazioni sulla disponibilità dei pezzi di ricambio.

Aggiornamenti software: Non vengono fornite informazioni sugli aggiornamenti software garantiti.

For technical support or further assistance, please contact your local LogiLink distributor or visit the LogiLink support portal.

	LogiLink 4K Wireless Video Extender Set (HDW0102) - Specifications & User Guide Learn about the LogiLink 4K Wireless Video Extender Set (HDW0102). Features include 4K UHD resolution, 30m range, low latency, and plug-and-play setup for seamless HDMI connectivity.
	LogiLink 4K Wireless Video Extender Set (HDW0104) - Specifications & Overview Learn about the LogiLink HDW0104 4K Wireless Video Extender Set. Features USB-C to HDMI connectivity, 30m range, low latency, and plug-and-play setup for seamless streaming.
	LogiLink HD0023 HDMI Extender Set Over Network Cable - 1080p/60Hz, 60m Detailed specifications and features of the LogiLink HD0023 HDMI Extender Set, enabling 1080p@60Hz signal extension up to 60 meters over a Cat. 6/7/8 network cable, with IR signal return.
	LogiLink HD0023 HDMI Extender Set Over Network Cable - 60m, 1080p LogiLink HD0023 is a 60-meter HDMI extender set that transmits Full HD 1080p/60Hz video and audio over a single Cat. 6/7/8 network cable. It supports HDCP 1.3, CEC, and includes bidirectional IR control and Power over Cable (PoC) functionality for simplified setup.
	LogiLink 4K HDMI Over IP Extender/Splitter Set HD0030 - 70m Detailed specifications and features of the LogiLink HD0030 4K HDMI Over IP Extender/Splitter Set, enabling 4K@60Hz signal transmission up to 70 meters over a single network cable. Includes technical data on resolution, bandwidth, HDCP compatibility, and package contents.
	LogiLink HDW0104 4K Wireless Video Extender Set Datasheet Technical specifications and features for the LogiLink HDW0104 4K Wireless Video Extender Set, enabling seamless USB-C to HDMI transmission up to 30m.