Introduzione
This manual provides essential instructions for the proper installation, use, and maintenance of your Evenflo Chase LX Harnessed Booster Car Seat. Please read all instructions carefully before using the car seat and keep this manual for future reference. Proper use ensures the safety and comfort of your child.
Informazioni importanti sulla sicurezza
AVVERTIMENTO:
- Assicurare sempre il bambino nel seggiolino e il seggiolino nel veicolo secondo le istruzioni.
- Non lasciare mai il bambino incustodito nel seggiolino.
- Do not use this car seat if it has been involved in a crash, even if there is no visible damage. Replace it immediately.
- Refer to your vehicle owner's manual for specific car seat installation instructions and locations.
- This car seat is designed for forward-facing use only.
Caratteristiche del prodotto
- 2 Seats in 1: Converts from a forward-facing harness seat to a belt-positioning booster.
- Removable Head Pillow: Provides comfort and support, easily removable for cleaning.
- Portabicchieri doppi: Integrated cup holders for convenience.
- Posizioni della fibbia: Two crotch buckle positions for growing children.
- Up-Front Harness Adjust: Central front access for easy harness adjustment.
- Vehicle Belt Guides: Ensures proper vehicle belt positioning in booster mode.
- Machine-Washable Fabrics: Durable fabrics for easy cleaning.
- Testato contro gli impatti laterali: Meets or exceeds federal safety standards and Evenflo's Side Impact Test Standard.
Componenti finitiview
Familiarize yourself with the main components of your Evenflo Chase LX car seat.
Figura 1: Fronte view of the Evenflo Chase LX Harnessed Booster Car Seat, showing the harness system, headrest, and dual cup holders.
Figura 2: lato view of the Evenflo Chase LX Harnessed Booster Car Seat, highlighting the side impact protection and overall structure.
Figura 3: Angolato view of the Evenflo Chase LX Harnessed Booster Car Seat, showing the full seat and harness system.
Configurazione e installazione
Mode 1: 5-Point Harness (Forward-Facing)
For children weighing 30-40 lbs (13.6-18.1 kg) and measuring 28-50 inches (71-127 cm) in height.
- Posizionare il seggiolino auto: Place the car seat forward-facing on the vehicle seat. Ensure the vehicle seat back is upright.
- Adjust Harness Height: Select the harness slots that are at or slightly above your child's shoulders.
- Secure with Vehicle Belt or LATCH:
- Sistema LATCH: Attach the lower anchor connectors to your vehicle's lower anchor bars. Press down firmly on the car seat while tightening the LATCH strap until the car seat is secure and moves less than 1 inch (2.5 cm) side-to-side or front-to-back at the belt path.
- Cintura di sicurezza del veicolo: Route the vehicle lap and shoulder belt through the designated belt path on the car seat. Buckle the vehicle belt and remove all slack by pressing down on the car seat while pulling the shoulder belt. Lock the vehicle seat belt according to your vehicle owner's manual.
- Fissare il Top Tether: Connect the top tether strap to the vehicle's top tether anchor and tighten it securely.
Figure 4: Image showing the up-front harness adjustment mechanism, allowing for easy tightening and loosening of the harness straps.
Figura 5: primo piano view of the two crotch buckle positions, demonstrating how to adjust for a growing child.
Mode 2: High-Back Booster
For children weighing 40-100 lbs (18.1-45.3 kg) and measuring 43-57 inches (109-145 cm) in height.
- Remove Harness: Follow the instructions in your car seat manual to remove the 5-point harness system. Store the harness components in a safe place for future use if needed.
- Posizionare il seggiolino auto: Place the booster seat forward-facing on the vehicle seat.
- Posizionamento del bambino: Ensure your child's back is flat against the booster seat back.
- Vehicle Belt Routing: Route the vehicle lap belt under the armrests and across your child's upper thighs. The shoulder belt must pass through the red belt guide near your child's shoulder.
- Secure Child: Buckle the vehicle seat belt and ensure it lies flat and snug across your child's body, without any twists.
Figure 6: The Evenflo Chase LX car seat configured in high-back booster mode, showing the path for the vehicle's shoulder belt through the red guide.
Istruzioni per l'uso
Securing Your Child in Harness Mode
- Posizionare il bambino sul seggiolino auto con la schiena ben appoggiata allo schienale.
- Bring the harness straps over your child's shoulders and buckle the chest clip at armpit level.
- Insert the two buckle tongues into the crotch buckle until they click.
- Pull the harness adjustment strap at the front of the seat until the harness is snug against your child's body. You should not be able to pinch any slack in the harness webbing alla spalla.
Figure 7: A child properly secured in the Evenflo Chase LX car seat using the 5-point harness system, demonstrating correct strap and buckle positioning.
Regolazione del poggiatesta
The headrest is designed to self-adjust with the vehicle belt in booster mode. For harness mode, ensure the headrest provides proper support and the harness straps are at the correct height.
Figure 8: A hand demonstrating the removal of the plush head pillow for cleaning or as the child grows, highlighting its easy-to-detach design.
Manutenzione e pulizia
- Tessuti: The seat pad and head pillow are machine-washable. Use cold water and a gentle cycle. Tumble dry on low heat or air dry. Do not use bleach.
- Cinghie dell'imbracatura: Pulisci le cinghie dell'imbracatura con un pannoamp panno. Non lavare in lavatrice o immergere in acqua, poiché ciò potrebbe indebolire il webbing.
- fibbie: Clean buckles with a damp cloth. If the crotch buckle becomes sticky, rinse it with warm water. Do not use detergents or lubricants.
- Parti in plastica e metallo: Pulisci con un panno morbido, damp panno e sapone neutro.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'imbracatura è difficile da stringere o allentare. | Le cinghie dell'imbracatura potrebbero attorcigliarsi o impigliarsi. | Check for twists in the harness straps. Ensure the harness is routed correctly through the seat back. |
| Car seat moves too much after installation. | Vehicle belt or LATCH strap not tight enough. | Re-install the car seat, applying more pressure to the seat while tightening the vehicle belt or LATCH strap. Ensure movement is less than 1 inch (2.5 cm). |
| Crotch buckle is sticky or hard to engage. | Food or debris in the buckle mechanism. | Rinse the buckle with warm water. Do not use detergents or lubricants. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | Chase LX |
| Minimum Weight (Harness) | 30 libbre (13.6 kg) |
| Maximum Weight (Harness) | 40 libbre (18.1 kg) |
| Minimum Weight (Booster) | 40 libbre (18.1 kg) |
| Maximum Weight (Booster) | 100 libbre (45.3 kg) |
| Minimum Height (Harness) | 28 pollici (71 cm) |
| Maximum Height (Harness) | 50 pollici (127 cm) |
| Minimum Height (Booster) | 43 pollici (109 cm) |
| Maximum Height (Booster) | 57 pollici (145 cm) |
| Tipo di installazione | LATCH o cintura di sicurezza del veicolo |
| Orientamento | Rivolto in avanti |
| Tipo di cablaggio | 5 punti |
| Dimensioni dell'articolo (P x L x A) | 18"P x 18.5"L x 29.5"A (45.7 cm x 47 cm x 74.9 cm) |
| Peso dell'articolo | 9.1 libbre (4.1 kg) |
| Tipo di materiale | Poliestere |
Supporto e contatti
For additional assistance with installation or product questions, please contact Evenflo ParentLink® Consumer Care Team. Live video support with a certified car seat safety technician is available to assist with proper vehicle installation.
Visit the official Evenflo websito per ulteriori informazioni e risorse di supporto.
Evenflo is committed to creating safe and innovative products for families.
Video ufficiale del prodotto
Video 1: Evenflo Chase LX Harnessed Booster Car Seat Product Overview. This video provides a visual guide to the features and functionality of the car seat, including harness adjustment and head pillow removal.
