Manuale utente dell'adattatore per tubo flessibile di gonfiaggio per pneumatici esteso CYCPLUS da 15.8''

Prodotto finitoview

The CYCPLUS 15.8'' Extended Tire Inflator Hose Adapter is designed to extend the reach and improve the usability of compatible portable air pumps. This accessory facilitates easier tire inflation by providing additional length and a secure connection to the tire valve.

Image: The CYCPLUS 15.8'' Extended Tire Inflator Hose Adapter, featuring a black braided hose with brass connectors and a quick-clip valve attachment.

Compatibilità

This hose adapter is compatible with CYCPLUS portable air pumps models A2, A2 Plus, AL2, A14, E A8. È NON suitable for tiny E-pump models.

Contenuto della confezione

• Air hose adapter (15.8 inches)
• Adattatore per valvola Presta

Impostare

1. Connect to Inflator: Screw the threaded end of the 15.8-inch hose adapter onto the output port of your compatible CYCPLUS portable air pump (A2/A2 Plus/AL2/A14/A8). Ensure a tight seal to prevent air leakage.
2. Collegare alla valvola del pneumatico:
   • For Schrader valves: Directly attach the quick-clip end of the hose adapter to the tire's Schrader valve stem. Push down the lever to lock it in place.
   • For Presta valves: If your tire has a Presta valve, first screw the included Presta valve adapter onto the tire's valve stem, then attach the quick-clip end of the hose adapter to the Presta valve adapter and lock the lever.

Istruzioni per l'uso

1. Connessione sicura: Ensure the hose adapter is securely connected to both the air pump and the tire valve.
2. Power On Inflator: Turn on your compatible CYCPLUS portable air pump.
3. Imposta la pressione desiderata: Use the controls on your air pump to set the desired tire pressure (PSI).
4. Inizia l'inflazione: Activate the inflation function on your air pump. The hose adapter will channel air into the tire.
5. Funzione di arresto automatico: Compatible CYCPLUS pumps typically feature an auto-stop function that will cease inflation once the preset pressure is reached.
6. Disconnetti: Once inflation is complete and the pump has stopped, release the lever on the quick-clip end of the hose adapter and carefully disconnect it from the tire valve. If a Presta adapter was used, unscrew it from the valve stem.

Manutenzione

• Pulizia: Wipe the hose adapter with a clean, dry cloth after each use to remove dirt or debris.
• Magazzinaggio: Store the hose adapter in a cool, dry place away from direct sunlight and extreme temperatures.
• Ispezione: Periodically inspect the hose and connectors for any signs of wear, cracks, or damage. Replace if necessary.

Risoluzione dei problemi

• Nessun flusso d'aria:
  • Check if the hose adapter is securely connected to both the pump and the tire valve.
  • Ensure the pump is powered on and functioning correctly.
  • Verify compatibility with your specific CYCPLUS pump model.
• Calore eccessivo: The inflator and hose adapter may become warm during prolonged use, especially when inflating tires to high pressures. Use the hose adapter to keep your hands away from the direct connection point to the pump.
• Problemi di compatibilità: This adapter is specifically designed for CYCPLUS A2/A2 Plus/AL2/A14/A8 models. It is not guaranteed to work with other brands or tiny E-pumps.

Specifiche

Informazioni sulla garanzia

This product comes with a two-year warranty provided by CYCPLUS. Please refer to the manufacturer's warranty policy for specific terms and conditions.