1. Introduzione
Thank you for choosing the IBO OHI 32-60/180 3-Stage Heating Circulation Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pump. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Istruzioni di sicurezza
Importante: La mancata osservanza di queste istruzioni di sicurezza può causare scosse elettriche, incendi, lesioni gravi o danni alla proprietà.
- Assicurarsi che l'alimentazione corrisponda al voltage specified on the pump's rating plate.
- Scollegare sempre l'alimentazione elettrica prima di eseguire qualsiasi intervento di installazione, manutenzione o riparazione.
- Installation and electrical connections must be performed by a qualified electrician in accordance with local regulations.
- Non utilizzare la pompa se è danneggiata o se il cavo di alimentazione è sfilacciato.
- Proteggere la pompa dalle temperature gelide.
- This pump is designed for circulating hot water in heating systems. Do not use it for other liquids or purposes.
3. Prodotto finitoview
The IBO OHI 32-60/180 is a robust 3-stage circulation pump designed for heating systems. Its construction and high-quality materials ensure quiet operation and reliable performance. The pump features a ceramic rotor shaft for durability.
Caratteristiche principali:
- 3-speed motor for adaptable operation.
- Quiet performance due to quality materials.
- Ceramic rotor shaft.
- Nominal pressure: 10 bar.
- Mounting height: 180 mm.
- Delivery height: 6 m.
Figure 1: IBO OHI 32-60/180 Circulation Pump. This image shows the main body of the pump, typically orange in color, with connection points for the heating system pipes.
4. Configurazione e installazione
Before installation, ensure the system is depressurized and drained. The pump should be installed in a horizontal position with the motor shaft horizontal.
- Preparare il sito di installazione: Ensure there is sufficient space around the pump for maintenance and ventilation.
- Montaggio: Securely mount the pump to the piping system. The mounting height is 180 mm.
- Collegare le tubazioni: Connect the heating system pipes to the pump. The threaded connection diameter is 2" / 1 1/2". Ensure all connections are sealed properly using the provided gaskets.
- Collegamento elettrico: A qualified electrician must perform the electrical wiring. Connect the pump to a suitable power supply (230V, 50Hz) according to local electrical codes. Ensure proper grounding.
- Sistema di riempimento e sfiato: After installation, fill the heating system with water and thoroughly vent all air from the system, including the pump.
5. Istruzioni per l'uso
The IBO OHI 32-60/180 pump features a 3-speed motor, allowing you to adjust its performance to your heating system's requirements.
- Accensione: Once the pump is installed and the system is filled and vented, switch on the main power supply to the pump.
- Seleziona l'impostazione della velocità: The pump has a selector switch for three different speed levels. Choose the appropriate level based on your system's demand:
- Livello 1: 46W power consumption, 22 l/min flow rate, 3 m delivery height. Suitable for lower heating demands.
- Livello 2: 63W power consumption, 38 l/min flow rate, 5 m delivery height. A balanced setting for typical heating needs.
- Livello 3: 93W power consumption, 55 l/min flow rate, 6 m delivery height. For maximum heating performance.
- Monitoraggio: Periodically check the system pressure and pump operation to ensure optimal performance.
6. Manutenzione
Una manutenzione regolare garantisce la longevità e il funzionamento efficiente della pompa di circolazione.
- Ispezione annuale: It is recommended to have the pump inspected annually by a qualified technician.
- Pulizia: Keep the exterior of the pump clean and free from dust and debris. Do not use abrasive cleaners.
- Controllare eventuali perdite: Regularly inspect all connections for any signs of water leakage. Tighten connections if necessary.
- Qualità dell'acqua del sistema: Assicurarsi che l'acqua dell'impianto di riscaldamento sia pulita e trattata per prevenire la corrosione e la formazione di calcare, che possono compromettere le prestazioni della pompa.
- winterization: If the heating system is shut down for an extended period during freezing temperatures, ensure the pump and system are properly drained to prevent damage from freezing.
7. Risoluzione Dei Problemi
Questa sezione fornisce soluzioni ai problemi più comuni che potresti riscontrare. Per problemi non elencati qui, contatta personale di assistenza qualificato.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La pompa non si avvia | No power supply; Motor seized; Air in pump. | Check power connection and circuit breaker; Try to free the rotor (consult technician); Vent the pump and system. |
| La pompa è rumorosa | Air in system; Cavitation; Foreign objects in pump. | Vent the system thoroughly; Check system pressure; Disconnect power and inspect pump (consult technician). |
| Flusso/pressione insufficiente | Incorrect speed setting; Air in system; Blockage in pipes/pump; Low system pressure. | Adjust speed setting; Vent the system; Check for blockages; Increase system pressure. |
| Perdita nei collegamenti | Collegamenti allentati; guarnizioni danneggiate. | Tighten connections; Replace gaskets. |
8. Specifiche tecniche
| Parametro | Valore |
|---|---|
| Numero di modello | OHI 32-60/180 |
| Produttore | DAMBAT JASTRZĘBSKI S.K.A. |
| Threaded Connection Diameter | 2" / 1 1/2" |
| Pressione nominale | 10 barre |
| Altezza di montaggio | 180 millimetri |
| Altezza massima di consegna | 6 metri |
| Portata massima | 55 litri al minuto |
| Power Consumption (Level 1) | 46W |
| Power Consumption (Level 2) | 63W |
| Power Consumption (Level 3) | 93W |
| Materiale | Ghisa |
| Fonte di alimentazione | Cavo elettrico |
| Dimensioni del prodotto | Dimensioni: 18 x 20 x 21 cm |
| Componenti inclusi | Pump with seals |
9. Garanzia e supporto
This IBO product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's authorized service center. Keep your proof of purchase handy when contacting support.
Produttore: DAMBAT JASTRZĘBSKI S.K.A.