Manuale di istruzioni per il pulitore a ultrasuoni FOHERE JX-031S da 6.5 ​​l

Importanti istruzioni di sicurezza

Please read and understand all safety instructions before operating the FOHERE JX-031S Ultrasonic Cleaner. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

• Sicurezza elettrica: Ensure the unit is properly grounded. Do not operate with wet hands or in wet environments. Disconnect power before cleaning or servicing.
• Gestione dei liquidi: Always ensure the water level is over 2/3 capacity of the tank before operation to prevent damage to the unit. Never operate the unit without liquid. Exercise caution with hot water and cleaning solutions to avoid scalding. Do not pour flammable liquids into the tank.
• Funzionamento generale: Keep out of reach of children. Do not disassemble or modify the unit. Use only as directed in this manual.

Prodotto finitoview

The FOHERE JX-031S is a 6.5L ultrasonic cleaner designed for effective cleaning of various items using high-frequency sound waves and heat.

Componenti e caratteristiche

• High-Power Transducers: Equipped with three 60W ultrasonic transducers (total 180W) for efficient cleaning.
• Serbatoio di grande capacità: 6.5L (1.7 Gallon) 304 stainless steel tank, suitable for various items.
• Sistema di riscaldamento: Integrated 200W heating system capable of heating water up to 176°F (80°C).
• 40kHz Frequency: Professional ultrasonic frequency for powerful cavitation without damaging delicate surfaces.
• Pannello di controllo digitale: LED display for precise control of time (1-30 minutes) and temperature (1°F increments).
• Caratteristiche utili: Detachable basket, built-in drain valve, and non-slip silicone feet.

Impostare

Disimballaggio

Carefully remove the ultrasonic cleaner from its packaging. Inspect the unit for any signs of damage. Retain packaging for future storage or transport.

Posizionamento

Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit and that the power cord can reach a grounded outlet without strain.

Riempimento iniziale

Open the lid and fill the stainless steel tank with water or an appropriate cleaning solution. Ensure the liquid level is above the 'MIN' mark and below the 'MAX' mark, ideally covering at least 2/3 of the tank capacity. Do not overfill.

Video di installazione e funzionamento

Operazione

Procedura di pulizia di base

1. Riempire il serbatoio: Ensure the tank is filled with water or an appropriate cleaning solution to the recommended level (over 2/3 capacity).
2. Posiziona gli elementi: Place the items to be cleaned into the stainless steel basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom of the tank.
3. Connetti alimentazione: Plug the unit into a grounded electrical outlet. Turn on the main power switch located at the back of the unit.
4. Imposta temperatura (facoltativo): Use the 'TEMP+' and 'TEMP-' buttons on the digital control panel to set the desired heating temperature. Press the 'ON/OFF' button under 'TEMP' to start heating.
5. Imposta ora: Use the 'TIME+' and 'TIME-' buttons to set the desired cleaning duration (1-30 minutes).
6. Inizia la pulizia: Press the 'ON/OFF' button under 'TIME' to start the ultrasonic cleaning process. The display will show the remaining time.
7. Fine: Once the cleaning cycle is complete, the unit will stop automatically. Carefully remove the basket with the cleaned items.

Recommended Settings for Various Items

The 40kHz ultrasonic frequency ensures thorough cleaning, reaching intricate parts and hard-to-reach areas effectively.

Manutenzione

Svuotamento del serbatoio

After cleaning, turn off the unit and unplug it from the power outlet. Place a suitable container under the drain valve located on the side of the unit. Open the drain valve to empty the tank. Close the valve once the tank is empty.

Pulizia dell'unità

Pulire l'esterno dell'unità con un panno morbido, damp cloth. For the interior tank, rinse with clean water and wipe dry. Do not use abrasive cleaners or immerse the entire unit in water.

Magazzinaggio

Conservare il pulitore a ultrasuoni in un luogo fresco e asciutto, lontano dalla luce solare diretta e dall'umidità. Assicurarsi che il serbatoio sia completamente asciutto prima di riporlo.

Risoluzione dei problemi

Specifiche

Dati tecnici

Garanzia e supporto

FOHERE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FOHERE websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.