PHYSEN JKD-514COM-W 2-in-1 WLAN Smoke and CO Detector

1. Introduzione

Thank you for choosing the PHYSEN JKD-514COM-W 2-in-1 WLAN Smoke and Carbon Monoxide Detector. This device is designed to provide early warning of both smoke and carbon monoxide (CO) hazards in your home or office. It features a high-precision LCD digital display, a test button, and connects to your 2.4 GHz WiFi network for app notifications. Please read this manual thoroughly before installation and use to ensure proper operation and safety.

2. Informazioni importanti sulla sicurezza

• This detector is designed for indoor use only.
• Non verniciare il rilevatore. La vernice può ostruire le camere di rilevamento e impedire il corretto funzionamento dell'unità.
• Do not install in areas with high humidity, excessive dust, or insect infestation.
• Testare regolarmente il rilevatore come descritto nella sezione Manutenzione.
• Non ignorare mai un allarme. Indagare immediatamente sulla causa.
• Questo dispositivo non sostituisce la corretta ventilazione e manutenzione degli apparecchi a combustione.

3. Prodotto finitoview

The PHYSEN JKD-514COM-W detector combines photoelectric smoke sensing and electrochemical CO sensing in one compact unit. It provides continuous monitoring and alerts you to potential dangers.

Immagine 1: anteriore view of the PHYSEN JKD-514COM-W 2-in-1 WLAN Smoke and CO Detector, showing the LCD screen and test button.

Componenti chiave:

• Display digitale LCD: Shows battery level and CO concentration in PPM.
• Pulsante Test/Silenzio: Utilizzato per testare l'allarme e silenziare i falsi allarmi.
• Luci di stato a LED: Green for normal operation, Red for alarm status.
• Cicalino: Emits a loud 85 dB alarm sound.

4. Configurazione e installazione

4.1 Installazione della batteria

1. Remove the mounting bracket by twisting the detector counter-clockwise.
2. Aprire il coperchio del vano batterie.
3. Insert two 1.5V AA alkaline batteries, ensuring correct polarity (+ and -).
4. Close the battery compartment cover. The detector will emit a short beep and the green LED will flash, indicating it is powered on.

4.2 Scelta di una posizione di montaggio

For optimal protection, install detectors in all sleeping areas and on every level of your home. Consider the following:

• Rilevamento di fumo: Mount on the ceiling in the center of a room or at least 10 cm (4 inches) from a wall. Avoid corners.
• Rilevamento di CO: Install at breathing height, typically 1.5 meters (5 feet) from the floor.
• Avoid installing near windows, doors, or vents where drafts could affect readings.
• Keep away from cooking appliances, bathrooms, and areas with high humidity.

4.3 Montaggio del rilevatore

1. Utilizzando la staffa di montaggio come modello, segnare due fori sulla parete o sul soffitto.
2. Drill the holes and insert the provided wall plugs.
3. Screw the mounting bracket firmly into place.
4. Align the detector with the mounting bracket and twist clockwise until it locks securely.
5. Perform a test by pressing the Test/Silence button.

5. WLAN (Wi-Fi) Connection and App Setup

The detector connects to your 2.4 GHz WiFi network via the "Smart Life" or "Tuya" app for remote monitoring and notifications.

1. Scarica l'App: Cercare "Smart Life" or "Tuya Smart" in your smartphone's app store (iOS or Android) and install it.
2. Registrati/Accedi: Apri l'app e crea un account o accedi se ne hai già uno.
3. Aggiungi dispositivo: Tap the "+" icon or "Add Device" in the app. Select "Security & Video Surveillance" > "Smoke Detector (Wi-Fi)" or "CO Detector (Wi-Fi)".
4. Inserisci i dettagli Wi-Fi: Assicurati che il tuo telefono sia connesso a una rete Wi-Fi a 2.4 GHz. Inserisci la password Wi-Fi nell'app.
5. Modalità di accoppiamento: On the detector, press and hold the Test/Silence button for 5-10 seconds until the LED indicator flashes rapidly. Confirm this in the app.
6. Collegare: The app will search for and connect to the detector. Once connected, you can name the device (e.g., "Living Room Smoke/CO Detector") for easy identification of alarm sources.
7. Condividi dispositivo: You can share access to the detector with up to 12 family members or friends through the app, allowing them to receive alarm notifications.

6. Funzionamento

6.1 Funzionamento normale

During normal operation, the green LED indicator will flash approximately every 40 seconds, and the LCD will display the current battery level and CO concentration (if any) in PPM. A new measurement is carried out every 40 seconds.

6.2 Condizioni di allarme

• Allarme antincendio: The red LED will flash rapidly, and the buzzer will emit a loud, continuous alarm sound. The app will send an immediate notification.
• Allarme monossido di carbonio (CO): The red LED will flash rapidly, and the buzzer will emit a series of short beeps. The LCD will display the detected CO level. If the CO value exceeds 200 ppm, an alarm will be sent via the app.
• Avviso di batteria scarica: The detector will chirp periodically, and the LCD will show a low battery icon. Replace batteries immediately.
• Avviso di malfunzionamento: The detector constantly monitors itself. If a malfunction is detected, it will indicate an error, and the app will notify you.

6.3 Funzione di test

Press and hold the Test/Silence button for a few seconds. The detector will sound the alarm and flash the red LED, confirming that its electronic circuitry, horn, and battery are working. Release the button to stop the test.

6.4 Funzione silenzio

In case of a non-emergency alarm (e.g., cooking smoke), you can temporarily silence the alarm by pressing the Test/Silence button. The alarm will silence for a short period (typically 5-10 minutes) before re-evaluating the air quality. If the hazard persists, the alarm will reactivate.

7. Manutenzione

7.1 Test regolari

Test your detector weekly by pressing the Test/Silence button. If the alarm does not sound, replace the batteries or contact support.

7.2 Pulizia

Clean the detector at least once a month to remove dust and debris. Use a soft, damp cloth to wipe the exterior. Do not use cleaning sprays or solvents. You may also use a vacuum cleaner with a soft brush attachment to gently clean around the vents.

7.3 Sostituzione della batteria

When the low battery warning sounds (periodic chirp and low battery icon on LCD), replace both 1.5V AA alkaline batteries immediately. Refer to section 4.1 for battery installation steps.

7.4 Indicazione di fine vita

The detector has a sensor life of 10 years. After this period, the unit will indicate its end-of-life, and it should be replaced to ensure continued protection.

8. Risoluzione Dei Problemi

9. Specifiche

• Modello: JKD-514COM-W
• Tipo di sensore: Fotoelettrico (fumo), elettrochimico (CO)
• Fonte di energia: 2 batterie alcaline AA da 1.5 V
• Intensità dell'allarme: 85 dB a 3 metri
• Intervallo di rilevamento del CO: 0-999 PPM
• Temperatura di esercizio: da 0°C a 40°C (da 32°F a 104°F)
• Umidità di esercizio: 0% a 95% RH (senza condensa)
• Dimensioni: 10.5 x 10.5 x 3.85 cm (4.13 x 4.13 x 1.52 pollici)
• Peso: Circa 500 g (0.5 kg)
• Certificazioni: EN14604, EN50291
• Durata del sensore: 10 anni

10. Garanzia e supporto

The PHYSEN JKD-514COM-W detector is designed for a long service life, with a sensor life of 10 years. For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official PHYSEN website. Always ensure you have your model number (JKD-514COM-W) and purchase details ready when contacting support.