OBEST E1pro

OBEST E1pro Motorcycle Helmet Bluetooth Headset with 2K Camera User Manual

Model: E1pro

1. Introduzione

Thank you for choosing the OBEST E1pro Motorcycle Helmet Bluetooth Headset. This device integrates a 2K camera, Bluetooth communication system, and FM radio, designed to enhance your riding experience with safety and connectivity. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

2. Caratteristiche del prodotto

  • 2K Camera & 140° Wide Angle: Equipped with a 2K/30fps all-glass lens and 140° wide angle for clear video capture. Supports up to 256GB memory expansion (SD card not included).
  • Rotatable Host/Lens: Features a 360° rotatable base and 15° horizontally adjustable lens for flexible shooting angles.
  • 6-Person 800M Intercom: Supports real-time intercom for up to 6 riders within an 800-meter range using Bluetooth 5.1.
  • Cancellazione intelligente del rumore: Advanced noise reduction microphone with Active Noise Cancellation (ANC) for clear audio.
  • Multifunzionale: Supports music sharing, hands-free calls, volume control, GPS navigation, and FM radio.
  • Batteria a lunga durata: Built-in 2350 mAh lithium battery provides approximately 6 hours of video recording, 76 hours of intercom/phone use, and 118 hours of Bluetooth/FM radio.
  • Impermeabile: IP65 rated for water and sand resistance.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

  • Motorcycle Bluetooth Helmet Camera Headset (Host)
  • Ingranaggio clamps (x1)
  • Helmet clamps (x1)
  • Horn with velcro pads (x2)
  • Soft microphone stand (x1)
  • Headphone cotton cover (x2)
  • Thick horn gasket (x2)
  • Velcro pads for soft microphones (x2)
  • Microphone cover (x1)
  • 1 pair of headphones (hard microphone and soft microphone options)
Diagram showing all components included in the OBEST E1pro package and basic installation steps.
Figure 3.1: Package contents and installation overview.

4. Prodotto finitoview e controlli

Familiarize yourself with the device's buttons and indicators:

Diagram of the OBEST E1pro headset showing the location and function of each button and indicator.
Figure 4.1: OBEST E1pro control layout.
  • Recorder On/Off Key: Accende o spegne la fotocamera.
  • Headphone On/Off Key: Powers the Bluetooth headset on or off.
  • Tasto multifunzione: Used for various operations like pairing, answering calls, and music control.
  • One-touch Intercom Button: Avvia o termina la comunicazione interfonica.
  • Manopola del volume: Regola il volume audio.
  • Tasto modalità: Switches between different modes (e.g., FM radio, music).
  • Indicatore di lavoro: Displays device status (e.g., power, recording, pairing).

5. Installazione

Follow these steps to install the OBEST E1pro on your helmet:

  1. Montare la staffa: Choose between the gear clamp or adhesive helmet clamp. Securely attach the chosen clamp to the side of your helmet. Ensure the arrow on the bracket points upwards.
  2. Align and Fix: Align the fixed clamps and tighten the screws with the hexagonal wrench provided.
  3. Attach the Host: Snap the main unit (recorder) onto the mounted bracket from top to bottom until it clicks into place.
  4. Install Microphones and Speakers:
    • Attach the speakers inside the helmet, aligning them with your ears. Use the velcro pads for secure placement.
    • Connect the microphone. Choose between the hard microphone (for open-face helmets) or soft microphone (for full-face helmets) and position it near your mouth.
Image showing the OBEST E1pro headset mounted on a motorcycle helmet.
Figure 5.1: Headset mounted on a helmet.
Close-up image of the OBEST E1pro headset showing its design and attachment mechanism.
Figura 5.2: dettagliata view of the headset attachment.

6. Configurazione e associazione

6.1. Accensione/spegnimento

Press and hold the Headphone On/Off Key for 3 seconds to power on or off the headset. Press and hold the Recorder On/Off Key for 3 seconds to power on or off the camera.

6.2. Accoppiamento Bluetooth con il telefono

  1. Assicurati che le cuffie siano spente.
  2. Press and hold the Multi-function Key until the indicator light flashes red and blue alternately, indicating pairing mode.
  3. On your smartphone, enable Bluetooth and search for "OBEST E1pro".
  4. Select the device to pair. Once connected, the indicator light will turn blue.

6.3. Configurazione della fotocamera

The E1pro features a 2K/30fps camera with a 140° wide angle lens. Insert a Micro SD card (up to 256GB, not included) into the designated slot before recording. The camera supports loop recording, automatically overwriting the oldest files quando la carta è piena.

Image illustrating 2K video recording capabilities at 720P, 1080P, and 2K/30FPS, along with a diagram of the camera lens components.
Figure 6.1: 2K Video Recording and Lens Details.

The camera lens can be adjusted 15° horizontally, and the entire unit can rotate 360° on its base for optimal shooting angles.

Diagram showing the 140-degree wide-angle shooting capability and the 360-degree rotation of the mount, plus 15-degree horizontal lens adjustment.
Figure 6.2: Wide Angle Shooting and Adjustment.

6.4. Wi-Fi Direct Connection

For camera settings and video playback, connect your smartphone to the E1pro's Wi-Fi network. Refer to the dedicated app instructions for detailed steps.

7. Funzionamento

7.1. Comunicazione interfonica

The E1pro supports intercom communication for up to 6 riders within an 800-meter range.

  1. Ensure all participating E1pro units are powered on and within range.
  2. Press the One-touch Intercom Button on your device to initiate intercom pairing.
  3. Follow the pairing instructions for multiple units (refer to the full manual for detailed multi-unit pairing sequences).
  4. Once connected, press the One-touch Intercom Button to start or end a conversation.
Image depicting six motorcyclists riding together, with lines connecting them to illustrate the 6-rider group intercom feature over an 800-meter distance.
Figure 7.1: 6-Rider Group Intercom.

7.2. Riproduzione e condivisione di musica

After pairing with your phone, you can play music. Use the Multi-function Key to play/pause and the Volume Knob to adjust volume. The E1pro also supports music sharing with another paired device.

Image showing two motorcyclists wearing helmets, with musical notes floating between them, symbolizing the music sharing feature.
Figura 7.2: Funzione di condivisione della musica.

7.3. Telefonate

When a call comes in, the device will announce it. Press the Multi-function Key once to answer, or press and hold to reject. Press the Multi-function Key again to hang up.

7.4. Radio FM

Press the Mode Key to switch to FM radio mode. Use the Volume Knob to scan for stations or adjust volume.

Image of a helmet with an integrated headset, showing an FM radio interface overlay, indicating the FM radio function.
Figure 7.3: FM Radio Functionality.

7.5. Navigazione GPS

Once paired with your smartphone, GPS voice commands from your navigation app will be transmitted through the headset speakers.

7.6. Noise Cancellation (ANC)

The E1pro features Active Noise Cancellation (ANC) to reduce environmental noise for clearer communication and audio experience.

Diagram illustrating the effect of Active Noise Cancellation (ANC) on sound waves, showing noise reduction before and after activation.
Figura 7.4: Cancellazione attiva del rumore in azione.

8. Durata della batteria e ricarica

The device is equipped with a 2350 mAh rechargeable lithium battery. Charging is done via the included USB cable.

  • Video Recording: Approximately 6 hours
  • Intercom/Phone Calls: Approximately 76 hours
  • Bluetooth Music/FM Radio: Approximately 118 hours
Diagram showing the internal battery structure and estimated battery life for video recording, phone calls, and Bluetooth music.
Figure 8.1: Battery life estimates for various functions.

9. Specifiche

CaratteristicaSpecificazione
Nome del modelloE1pro
Tecnologia di connettivitàSenza fili (Bluetooth 5.1)
Risoluzione della fotocamera2K/30 fps
Grandangolo della fotocamera140°
InterfonoFino a 800 metri
Max Intercom Riders6 persone
Capacità della batteria2350 mAh
Tempo di registrazione videoCirca 6 ore
Intercom/Phone TimeCirca 76 ore
Bluetooth/FM Radio TimeCirca 118 ore
Controllo del rumoreActive Noise Cancellation (ANC)
Livello di resistenza all'acquaGrado di protezione IP65
MaterialePlastica
Peso dell'articolo13.6 once

10. Manutenzione

To ensure the longevity and optimal performance of your OBEST E1pro headset, follow these maintenance guidelines:

  • Pulizia: Utilizzare un morbido, damp panno per pulire l'esterno del dispositivo. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
  • Resistenza all'acqua: The device is IP65 rated, meaning it is protected against dust and low-pressure water jets. Do not submerge the device in water. Ensure all ports are securely closed before exposure to moisture.
  • Magazzinaggio: Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
  • Cura della batteria: In caso di conservazione a lungo termine, caricare la batteria a circa il 50% ogni tre mesi per evitare che si scarichi completamente.
Image showing the OBEST E1pro headset being splashed with water and covered in sand, illustrating its IP65 waterproof and sandproof rating.
Figure 10.1: IP65 Water and Sand Resistance.

11. Risoluzione Dei Problemi

If you encounter issues with your OBEST E1pro, refer to the following common troubleshooting steps:

  • Il dispositivo non si accende: Assicurati che la batteria sia carica. Collega il dispositivo a una fonte di alimentazione e riprova.
  • Impossibile associare il Bluetooth: Make sure the device is in pairing mode (flashing red and blue). Ensure your phone's Bluetooth is enabled and try restarting both devices.
  • Nessun audio/Qualità audio scarsa: Check volume levels on both the headset and your connected device. Ensure speakers are correctly positioned inside the helmet. Verify microphone connection.
  • Interfono non connesso: Ensure all units are within range and in intercom pairing mode. Follow the multi-unit pairing instructions carefully.
  • Camera Not Recording/Poor Video: Ensure a compatible Micro SD card is inserted and has sufficient free space. Check the camera lens for obstructions or dirt. Format the SD card if issues persist.
  • Problemi di connessione Wi-Fi: Ensure the camera's Wi-Fi is enabled. Try restarting the camera and your smartphone's Wi-Fi.

If problems persist, please contact OBEST customer support for further assistance.

12. Garanzia e supporto

For warranty information and customer support, please refer to the official OBEST websito o contattare il rivenditore. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.