Clore Automotive PL6850

Clore Automotive PL6850 12/24 Volt 120A Flashing Power Supply and Fleet Battery Charger Instruction Manual

Model: PL6850 | Brand: Clore Automotive

1. Introduzione

The Clore Automotive PL6850 is a versatile 12/24 Volt 120A unit designed for both stable power supply and multi-stage battery charging. It provides on-demand power for vehicle reprogramming and ADAS recalibration, ensuring stable system voltage. Additionally, it functions as a robust fleet service battery charger, capable of quickly and effectively charging various battery types.

2. Informazioni sulla sicurezza

  • Quando si lavora con le batterie, indossare sempre occhiali protettivi e indumenti protettivi.
  • Ensure adequate ventilation in the work area to prevent accumulation of explosive gases.
  • Connect the charger to the battery terminals correctly: positive (+) to positive, negative (-) to negative. Avoid reverse polarity.
  • Do not operate the charger if it is damaged or has been dropped.
  • Keep the charger away from moisture and flammable materials.
  • Refer to your vehicle's owner's manual for specific battery charging instructions.

3. Prodotto finitoview

The PL6850 features a robust design with intuitive controls and a clear display for monitoring charging status and voltage. It includes heavy-duty cables and clamps per connessioni sicure.

Clore Automotive PL6850 120A Flashing Power Supply and Battery Charger with cables and clamps

Figure 1: Clore Automotive PL6850 12/24 Volt 120A Flashing Power Supply and Fleet Battery Charger. The unit is black with a digital display and control buttons on the front panel. Heavy-duty red and black cables with clamps are coiled next to the unit.

4. Impostazione

  1. Disimballare l'unità: Remove the PL6850 and all accessories from the packaging.
  2. Ispezionare per danni: Check the unit, cables, and clampControllare eventuali segni di danneggiamento. Non utilizzare se danneggiato.
  3. Connect Power Clamps: Ensure the heavy-duty cables and clamps are securely connected to the unit. The unit's design allows for convenient storage of cables and clamps.
  4. Collegare alla presa di corrente: Plug the charger's power cord into a suitable 120V AC outlet.
  5. Collegamento alla batteria: Collegare il positivo rosso (+) clamp al terminale positivo della batteria e al polo negativo nero (-) clamp al terminale negativo della batteria. Assicurarsi che il collegamento sia saldo.

5. Modalità operative

5.1. Modalità di alimentazione

The Power Supply mode is designed to provide stable voltage to a vehicle's electrical system, crucial for module reprogramming and ADAS recalibration. It delivers 0-120A (12V) or 0-60A (24V) on demand, maintaining a steady system voltage of 14.1 Volts with minimal ripple (<100mV). This mode features Rapid Load Response (RLR) technology.

  • Selezionare

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.