Prodotto finitoview
The Bewinner LED Digital Alarm Clock (Model Bewinner0sfx29r7wg-14) is designed for convenience and functionality, featuring a clear LED display, adjustable brightness, dual alarms, and a 12/24-hour time format. This manual provides detailed instructions for setup, operation, and maintenance.

Figura 1: Oltreview of the Bewinner LED Digital Alarm Clock's key features.
Contenuto della confezione
- 1 x LED Alarm Clock
- 1 x cavo di alimentazione (cavo USB)
- 1 x Manuale di istruzioni

Figure 2: The alarm clock and its USB power cable.
Impostare
Accensione del dispositivo
The Bewinner LED Digital Alarm Clock is primarily outlet powered. A USB cable is included for power. An AC adapter is not included and must be supplied separately (5V 1A recommended).
- Connect the provided USB power cord to the DC 5V input port on the back of the alarm clock.
- Collegare l'altra estremità del cavo USB a un adattatore di alimentazione USB compatibile (non incluso) o a una porta USB alimentata.
- The clock will power on and display the time.
Battery Backup (Not for Primary Power)
The clock supports 3 x AAA batteries (not included) for memory backup. These batteries will retain time and alarm settings during a power outage but will not power the main display continuously. The display will only light up for 8 seconds when a button is pressed in battery mode.
- Aprire il vano batteria sul retro dell'orologio.
- Inserire 3 batterie AAA, assicurandosi della corretta polarità.
- Chiudere il vano batterie.

Figure 3: Power input and battery compartment.
Istruzioni per l'uso
Controlli finitiview
The clock features several buttons on the top and back for setting time, alarms, and brightness. Refer to the diagram below for button identification.

Figure 4: Control buttons on the alarm clock.
Impostazione dell'ora
- Premere e tenere premuto il tasto IMPOSTAZIONE DELL'ORA button on the back of the clock. The hour display will start flashing.
- Utilizzare il UP E GIÙ pulsanti per regolare l'ora.
- Premere IMPOSTAZIONE DELL'ORA di nuovo per passare alla regolazione dei minuti. Utilizzare UP E GIÙ per impostare i minuti.
- Premere IMPOSTAZIONE DELL'ORA una terza volta per confermare e uscire dalla modalità di impostazione dell'ora.
Formato 12/24 ore
To switch between 12-hour and 24-hour time display, press the UP button during normal time display. The display will show "AM" or "PM" in 12-hour mode.

Figure 5: Switching between 12-hour and 24-hour time display.
Setting Alarms (Dual Alarm Function)
The clock supports two independent alarms. You can set different alarm days.
- Premere e tenere premuto il tasto SET ALLARME pulsante. L'ora della sveglia lampeggerà.
- Utilizzo UP E GIÙ per impostare l'ora della sveglia desiderata.
- Premere SET ALLARME di nuovo per impostare i minuti della sveglia. Utilizzare UP E GIÙ.
- Premere SET ALLARME a third time to select alarm days (e.g., Mon-Sun, Mon-Sat, Mon-Fri, Single Day, Weekend). Use UP E GIÙ per scorrere le opzioni.
- Premere SET ALLARME per confermare e uscire.
- To set the second alarm, repeat the process.
Attivazione/disattivazione degli allarmi
To turn an alarm on or off, press the corresponding alarm toggle switch on the back of the clock.

Figure 6: Dual alarm settings and day options.
Funzione snooze
Quando suona un allarme, premere il tasto POSTICIPARE button (located on top) to activate a 5-minute snooze. The alarm will sound again after 5 minutes. To turn off the alarm completely, press any other button.
Regolazione della luminosità
The clock has 3 adjustable brightness levels (Low, Medium, Bright) and an option to turn off the display. Press the LEGGERO button (located on top) to cycle through the brightness settings.

Figure 7: Three levels of brightness adjustment.

Figure 8: Four levels of brightness adjustment including screen off.
Manutenzione
- Pulire la superficie dell'orologio con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Evitare di esporre l'orologio a temperature estreme, alla luce solare diretta o a elevata umidità.
- If using battery backup, replace AAA batteries annually or when the clock's memory function becomes unreliable.
- Ensure the USB power cable is not bent or damaged to maintain a stable power connection.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il display dell'orologio è spento. | No power or display brightness set to off. | Ensure USB power cable is securely connected to a working power source. Press the LEGGERO pulsante per regolare la luminosità. |
| L'allarme non suona. | L'allarme non è attivato o è impostato in modo errato. | Check if the alarm toggle switch is ON. Verify alarm time and day settings. |
| Ripristino dell'ora/delle impostazioni dopo lo spegnimentotage. | Nessuna batteria di riserva o batterie scariche. | Installare 3 nuove batterie AAA per il backup della memoria. |
| Il display è troppo scuro/luminoso. | Il livello di luminosità necessita di regolazione. | Premere il tasto LEGGERO pulsante per scorrere i livelli di luminosità. |
| Incorrect time format (12H/24H). | Time format needs to be changed. | Premere il tasto UP button during normal time display to switch formats. |
Specifiche
- Modello: Bewinner0sfx29r7wg-14
- Materiale: addominali
- Tipo di visualizzazione: GUIDATO
- Tipo di movimento: Elettronico
- Formato ora: 12/24 Hours selectable
- Livelli di luminosità: 3 levels (Low, Medium, Bright) + Off
- Funzione di allarme: Dual Alarms with selectable alarm days
- Tempo di posticipo: 5 minuti
- Alimentazione elettrica: 5V 1A (USB cable included, AC adapter not included)
- Battery Type (Backup): 3 batterie AAA (non incluse)
- Dimensioni: Circa 6.4 cm (2.5 pollici) x 3.5 cm (1.4 pollici) x 10 cm (3.9 pollici)
- Peso dell'articolo: 6.6 once (circa 187 g)

Figura 9: Dimensioni del prodotto.
Garanzia e supporto
Specific warranty information is not provided in the product details. For support or warranty inquiries, please refer to the seller's return policy or contact the manufacturer, Bewinner, directly through their official channels or the platform where the product was purchased.
Il prodotto è idoneo per una politica di reso/sostituzione di 30 giorni.