ROROLL WS-6916 Digital Satellite Finder Meter User Manual

1. Introduzione

This user manual provides comprehensive instructions for the ROROLL WS-6916 Digital Satellite Finder Meter. It is designed to assist users in setting up, operating, and maintaining the device for optimal performance in satellite dish alignment. Please read this manual thoroughly before using the product.

2. Prodotto finitoview

The ROROLL WS-6916 is a portable digital satellite finder meter equipped with a 3.5-inch high-definition TFT LCD screen. It supports MPEG-2/H.265(8 bit) hardware decoding and offers various functions for efficient satellite signal acquisition and analysis.

2.1 Caratteristiche principali

• 3.5-inch high definition TFT LCD screen.
• MPEG-2/H.265(8 bit) hardware decoding.
• Signal strength, BER, MER, S/N, and power measurement.
• Signal lock indication with panel LED and sound.
• Supports DiSEqC 1.0/1.1, 1.2/USALS, and 22kHz tone.
• Auto, blind, manual, and NIT scan modes.
• Software upgrade and file transfer via USB.
• LNB short protection.
• Built-in 7.4V/3000mAh Li-ion battery for approximately 4 hours of operation.
• Altoparlante integrato.
• Supports both AV out and AV in.
• Automatic angle calculation for Azimuth (AZ) and Elevation (EL).

2.2 Disposizione del dispositivo

Familiarize yourself with the device's buttons and ports.

Figura 1: Davanti view of the WS-6916 Satellite Finder Meter. This image displays the 3.5-inch LCD screen with a menu interface, along with the numerical keypad, navigation buttons (MENU, EXIT, OK, arrow keys), and function buttons (F1, F2, F3, SCAN, AV-S, TTXT, SUBT, TV/R, AUDIO, INFO, MUTE).

Figura 2: Posteriore e laterale view of the WS-6916. This image highlights the LNB input, AV input/output ports, USB port, 12V DC power input, power switch, and integrated speaker.

3. Impostazione

3.1 Carica iniziale

Before first use, fully charge the device's built-in Li-ion battery. Connect the provided power adapter to the DC 12V/1.5A input port on the device and plug it into a power outlet. The 'CHARGE' indicator LED will illuminate during charging.

Figura 3: Illustration of the 7.4V 3000mAh Li-ion rechargeable battery and the DC power input port for charging.

3.2 Collegamento all'antenna parabolica

1. Ensure the satellite finder is powered off.
2. Connect the LNB cable from your satellite dish to the "SATELLITE INPUT" F-type connector on the device.
3. If connecting to a receiver, connect the receiver's LNB output to the "LOOP OUT" port (if available and required by your setup).
4. Accendere il dispositivo tramite l'interruttore di alimentazione.

4. Istruzioni per l'uso

4.1 Navigazione nel menu

Utilizzare il MENU pulsante per accedere al menu principale. Utilizzare i tasti freccia (UP, GIÙ, SINISTRA, GIUSTO) per navigare tra le opzioni e OK pulsante per confermare le selezioni. Il EXIT button returns to the previous screen or exits the menu.

4.2 Ricerca satellitare

1. Dal menu principale, seleziona "Trova satellite".
2. Choose the desired satellite from the list. If the satellite is not listed, you may need to add it or perform a blind scan.
3. Adjust the satellite dish's azimuth and elevation angles while observing the signal strength and quality indicators on the screen. The device provides real-time feedback on signal strength (dBm), Bit Error Rate (BER), Modulation Error Ratio (MER), and Signal-to-Noise ratio (S/N).
4. When a strong signal is detected, the "LOCK" LED on the panel will illuminate, and an audible tone will sound. Fine-tune the dish for maximum signal quality.

Figura 4: The WS-6916 in use, displaying signal parameters such as strength, BER, MER, and S/N, which are crucial for accurate satellite dish alignment.

4.3 Impostazioni DiSEqC

The device supports DiSEqC 1.0/1.1, 1.2/USALS. Access these settings through the "Satellite Installation" or "System Setting" menu to configure for multiple LNBs or motorized dishes.

4.4 AV Input/Output

The WS-6916 features both AV input and output capabilities. Use the provided AV cable to connect external devices. The AV output can display the meter's screen on a larger monitor, while the AV input allows viewing external video sources on the meter's screen.

Figura 5: Connection diagram illustrating the AV IN and AV OUT ports, and how to connect them to external video and audio devices.

4.5 Software Upgrade and File Trasferire

Connect the device to a computer via the USB port for software upgrades or to transfer multimedia files (WMA, MP3, MP4, AVI, JPG, JPEG, BMP, IMG) to and from the device. Ensure the correct firmware file is used for upgrades to prevent damage.

5. Manutenzione

5.1 Cura della batteria

• Per prolungare la durata della batteria, evitare di scaricarla completamente frequentemente.
• Caricare regolarmente il dispositivo, anche se non lo si utilizza per periodi prolungati (ad esempio, una volta ogni 3 mesi).
• Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta.

5.2 Pulizia

Pulisci il dispositivo con un panno morbido e asciutto. Non utilizzare detergenti liquidi o materiali abrasivi, poiché potrebbero danneggiare lo schermo o il display.asing.

5.3 Conservazione

When not in use, store the satellite finder in its protective pouch in a dry environment to prevent dust and moisture damage.

6. Risoluzione Dei Problemi

• Nessun segnale rilevato:
  • Check all cable connections between the LNB and the meter.
  • Assicurarsi che l'LNB sia alimentato (controllare la tensione di alimentazione dell'LNB)tage in settings).
  • Verify correct satellite parameters (frequency, symbol rate, polarization) are selected.
  • Confirm the satellite dish is aimed correctly.
• Il dispositivo non si accende:
  • Ensure the battery is charged. Connect to the power adapter.
  • Controllare la posizione dell'interruttore di alimentazione.
• Protezione cortocircuito LNB attivata:
  • Disconnect the LNB cable immediately.
  • Inspect the LNB cable and connector for any damage or short circuits.
  • Replace faulty cables or LNBs as necessary.
• Problemi di visualizzazione dello schermo:
  • Assicurarsi che il dispositivo sia adeguatamente carico.
  • If the screen is frozen, try restarting the device.

7. Specifiche

Detailed technical specifications for the ROROLL WS-6916 Digital Satellite Finder Meter.

Figura 6: Dimensional drawing of the WS-6916, showing its length, width, and thickness.

8. Garanzia e supporto

For warranty information and technical support, please refer to the documentation included with your purchase or contact ROROLL customer service. Keep your purchase receipt as proof of purchase.

Produttore: ROROLL

Numero modello: 1005004448071483

Data prima disponibilità: 16 aprile 2025