CARabc Wireless CarPlay and Android Auto Adapter Instruction Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARabc Wireless CarPlay and Android Auto Adapter. This device integrates smartphone functionalities into your vehicle's infotainment system, enhancing your driving experience with navigation, communication, and entertainment features.

2. Compatibilità

This adapter is compatible with Peugeot and Citroen vehicles equipped with SMEG/MRN systems manufactured between 2013 and 2016. Compatible models include, but are not limited to, Peugeot 208, 308, 508, 3008, 408, 5008, and Citroen C4, C5, C6, DS3, DS4, DS5. Importante: This wireless CarPlay adapter is only compatible with SMEG and MRN systems, not NAC systems. Please verify your vehicle's OEM system before ordering. If you are unsure, contact CARabc support for professional assistance.

Figure 2.1: Identifying SMEG/MRN vs. NAC systems. The adapter is compatible with SMEG/MRN (left) but not NAC (right).

3. Contenuto della confezione

The package typically includes the following components. Please note that accessories may vary slightly depending on the specific model received.

• CARabc Wireless CarPlay/Android Auto Adapter Module
• Cavo di alimentazione
• CAN Gateway Cable
• Antenna WiFi
• Cavo USB
• LVDS Cable
• Cavo ausiliario

Figure 3.1: Main components of the CARabc adapter kit.

4. Configurazione e installazione

Installation requires basic automotive electrical knowledge and tools. If you are not comfortable performing the installation yourself, it is recommended to seek professional assistance.

4.1 Strumenti necessari

• Cacciavite Torx T20
• Chiavi per rimozione radio
• Trim removal tool for the center console

4.2 Schema elettrico e collegamenti

Refer to the wiring diagram below for proper connection of the adapter module to your vehicle's system.

Figure 4.1: Detailed wiring connections for the adapter module. Ensure all connections are secure.

1. Connect the WiFi Antenna to the adapter module.
2. Collegare il cavo LVDS.
3. Connect the original car's main unit cable to the adapter's input.
4. Connect the adapter's output to the original car's main unit.
5. Connect the USB port for updates or external devices.
6. Connect the AUX cable for audio output.
7. Connect the power cable, ensuring correct polarity (Yellow: B+, Red: ACC, Black: GND).
8. Per la parte posteriore-view camera functionality, connect the REAR-CVBS input and the reversing detection wire to the reverse light cable or 360 panoramic detection line.
9. Per la parte anterioreview camera, connect the FRONT-CVBS input.

4.3 DIP Switch Settings (for specific configurations)

For vehicles without an original reverse camera, adjust DIP switch settings on the adapter module:

• Impostare il DIP switch 2 su ON.
• Set DIP switches 1, 3, and 4 to OFF.

After setting the DIP switches, access the module's settings, navigate to "Advanced Features," and enable the "Original Camera" option.

4.4 Note importanti sull'installazione

• Ensure all connectors are fully seated and locked.
• Verify that the provided wiring harness matches your vehicle's original connectors. Some Citroen C4 Cactus 2018 models with SMEG systems may require a specific PSA SMEG Y harness. Contact support if you encounter incompatible connectors.
• Proper cable routing is essential to prevent pinching or damage.

5. Istruzioni per l'uso

The CARabc adapter allows you to use Wireless CarPlay and Android Auto, along with screen mirroring, while retaining original vehicle controls.

Figure 5.1: CarPlay interface displayed on the vehicle's screen.

5.1 Switching to CarPlay/Android Auto Interface

To switch between the original vehicle system and the adapter's interface (CarPlay/Android Auto), perform a premere a lungo on the designated button, typically on the steering wheel or center console (refer to Figure 5.3, button ①).

CarPlay wireless 5.2 e Android Auto

• Connettività: Once installed, the adapter enables wireless connection to your iPhone (for CarPlay) or Android smartphone (for Android Auto).
• Caratteristiche: Access navigation maps, phone contacts, emails, notifications, and music directly on your car's display.
• Assistente vocale: Utilize intelligent voice assistants (Siri for CarPlay, Google Assistant for Android Auto) for hands-free control.

Figure 5.2: Comparison of Apple CarPlay and Android Auto interfaces.

5.3 Screen Mirroring (AirPlay/AutoLink)

The adapter supports screen mirroring for both iPhone (AirPlay) and Android smartphones (AutoLink). This allows you to cast or share content such as videos (Netflix, YouTube), maps, and other applications from your phone to your car's screen.

5.4 Original Vehicle Button Control

The adapter maintains compatibility with your vehicle's original buttons and steering wheel controls. This includes:

• Switching System (①): Long press to switch between the original system and the adapter's interface.
• Call Control (②): Short press to answer or hang up a phone call. Long press to activate voice control (without using the original car's Bluetooth).
• Volume Control (③): Short press to adjust volume up or down.

Figure 5.3: Steering wheel control functions.

6. Risoluzione Dei Problemi

In caso di problemi, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

• Nessuna uscita audio:
  • Ensure the AUX input is correctly selected on your car's original head unit.
  • If using the original car's Bluetooth for calls, ensure the adapter's settings are configured to use the original Bluetooth for audio.
  • Some users report needing to connect to the car's original Bluetooth first, then activate CarPlay/Android Auto for audio to function correctly.
• Original Reverse Camera Not Working:
  • Verify DIP switch settings (refer to Section 4.3).
  • In the adapter's settings, go to "Advanced Features" and ensure "Original Camera" option is enabled.
  • If the adapter is active, it might override the original video signal. You may need to switch back to the SMEG menu to use the original reverse camera, then return to the adapter's menu.
• Incompatible Wiring Harness:
  • If the provided Quadlock connector does not match your vehicle's original connector (e.g., different keying or pin layout), contact CARabc support immediately. You may require a specific PSA SMEG Y harness.
• Difficoltà con l'installazione/configurazione:
  • The setup process can be complex. Refer to the detailed instructions in Section 4.
  • If issues persist, contact CARabc technical support for online assistance.

7. Specifiche

8. Garanzia e supporto

CARabc offers a one-year global warranty and lifetime technical support for this product. Our dedicated team is available to assist you with any questions or issues you may encounter.

For reliable and prompt online technical support, please contact us via Amazon email. We are committed to your satisfaction and ready to help with the utmost priority.

Disponibilità di pezzi di ricambio UE: 1 anno