GOOSKY E2 UH-1Y RC Helicopter Instruction Manual

1. Introduzione

Grazie per l'acquistoasing the GOOSKY E2 UH-1Y RC Helicopter. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new helicopter. Please read this manual thoroughly before operating the product to ensure proper function and to prevent damage or injury.

Linee guida di sicurezza

• Questo prodotto è consigliato per utenti dai 16 anni in su. Per gli utenti più piccoli si consiglia la supervisione di un adulto.
• Always operate the helicopter in an open, clear area, away from people, animals, buildings, and power lines.
• Non volare mai in prossimità di aeroporti o spazi aerei limitati.
• Prima di ogni volo, assicurarsi che tutte le batterie siano completamente cariche e correttamente installate.
• Do not operate the helicopter in strong winds or adverse weather conditions.
• Tenere dita, capelli e indumenti larghi lontani dalle parti rotanti.
• Spegnere sempre l'elicottero e il telecomando quando non vengono utilizzati.
• Refer to local regulations regarding RC aircraft operation.

2. Cosa c'è nella scatola

Si prega di verificare il contenuto del pacco in base all'elenco sottostante:

• Custodia per il trasporto (1)
• GOOSKY E2 UH-1Y RC Helicopter (1)
• Manuale di istruzioni (1)
• Dedicated Charger (1)
• 3S 11.1V 1600mAh Smart LIPO Battery (2)
• 2.4G A8 Rechargeable Remote Control (1)
• Extra Main Shaft (1)
• Tools (Several)
• Spare Screws (Several)

3. Impostazione

3.1 Ricarica della batteria

1. Connect the dedicated charger to a power outlet.
2. Connect the 3S 11.1V 1600mAh Smart LIPO Battery to the dedicated charger.
3. Allow approximately 90 minutes for a full charge. The charger's indicator light will signal when charging is complete.
4. Supervisionare sempre le batterie durante la carica e scollegarle una volta completamente cariche.

3.2 Preparazione del telecomando

1. Ensure the 2.4G A8 Rechargeable Remote Control is fully charged.
2. Familiarize yourself with the control sticks and switches. Refer to the remote control's specific manual for detailed layout and functions.

3.3 Controlli pre-volo

• Visually inspect the helicopter for any signs of damage, loose parts, or obstructions.
• Ensure the main rotor blades and tail rotor are securely attached and free to rotate.
• Confirm the flight battery is securely installed in the helicopter.
• Power on the remote control first, then the helicopter.
• Perform a range check to ensure proper communication between the remote control and the helicopter.

4. Istruzioni per l'uso

4.1 Controlli di volo di base

The GOOSKY E2 UH-1Y features 6-channel full control, allowing for precise maneuvers:

• Collective Pitch: Controls the lift and descent of the helicopter.
• Ciclico: Controlla il movimento in avanti, indietro e lateralmente.
• Imbardata: Controls the rotation of the helicopter around its vertical axis.
• Throttle: Controls the main rotor speed.

4.2 GPS Smart Satellite Positioning

The built-in GPS module provides real-time positioning and navigation, enhancing flight safety and control accuracy. In GPS mode, the helicopter automatically stabilizes itself, allowing it to hover at a fixed point and altitude. This feature simplifies operation, making it easier for beginners to learn.

4.3 Vision + TOF LiDAR System

The helicopter integrates a vision system for horizontal displacement data and a Time-of-Flight (TOF) LiDAR sensor for vertical altitude data. Together, these systems create a three-dimensional spatial coordinate system, enabling precise position and altitude hold, even in GPS-denied environments. This technology also supports intelligent return-to-home functions.

4.4 Intelligent Return-to-Home

The flight controller combines altitude and distance data to automatically plan a return route. When activated in GPS mode, the E2 UH-1Y will return to its takeoff point, land, and shut off its motors. Additionally, if the battery voltage drops too low during flight, an automatic return will be triggered to ensure a safe landing.

4.5 Flight Duration

With a fully charged 3S 11.1V 1600mAh Smart LIPO Battery, the helicopter can achieve a flight time of approximately 15 minutes.

5. Manutenzione

5.1 Pulizia

• After each flight, gently wipe the helicopter body with a soft, dry cloth to remove dust and debris.
• Avoid using chemical cleaners or solvents, as they may damage the plastic components or electronics.

5.2 Conservazione

• Conservare l'elicottero e il telecomando in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Rimuovere le batterie dal telecomando se si prevede di non utilizzarlo per lunghi periodi.
• Conservare le batterie LiPo a un volume di stoccaggiotage (in genere circa 3.8 V per cella) per prolungarne la durata.

5.3 Component Inspection and Replacement

• Regularly inspect rotor blades, landing gear, and other structural components for cracks or damage.
• If any part is damaged, replace it immediately using genuine GOOSKY spare parts. An extra main shaft and spare screws are included for common replacements.
• Assicurarsi che tutte le viti siano serrate correttamente, ma non eccessivamente.

6. Risoluzione Dei Problemi

If you encounter issues with your GOOSKY E2 UH-1Y RC Helicopter, please refer to the following common problems and solutions:

Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.

7. Specifiche

Detailed technical specifications for the GOOSKY E2 UH-1Y RC Helicopter:

8. Garanzia e supporto

For warranty information, technical support, or spare parts, please contact the manufacturer, GOOSKY, or your authorized seller (XMBRICDIYY). Please retain your proof of purchase for warranty claims.