Introduzione
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your WinZo Smart Toilet, model SM8008-2. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1: WinZo Smart Toilet SM8008-2
Funzioni di sicurezza
The WinZo Smart Toilet is equipped with several safety features to ensure user protection and product longevity.

Figura 2: Oltreview of Safety Functions
- 110V American Standard: Designed to meet standard electrical requirements.
- Volume alto/bassotage Protezione: Safeguards the unit from electrical fluctuations.
- Flame Retardant Seat: Enhances safety in case of electrical issues.
- IPX4 impermeabile: Fornisce protezione contro gli spruzzi d'acqua.
- Protezione dalla combustione a secco: Prevents damage from overheating when water levels are low.
Configurazione e installazione
Proper installation is crucial for the optimal performance of your smart toilet. It is recommended to have a qualified professional perform the installation.
Lista di controllo pre-installazione
- Ensure the ground is clean and dry.
- Verify the ground is horizontal using a level.
- Confirm the sewer pipe is unobstructed.
- Measure the rough-in distance (must be ≥12 inches).
- Ensure water pressure is over 0.14Mpa and flow rate is over 18L/min.
Fasi di installazione
- Prepare the Angle Valve: Wrap the raw material belt around the interface of the foot valve.
- Installare la valvola angolare: Securely install the angle valve to the water supply.
- Scaricare l'acqua residua: Open the angle valve briefly to drain any residual water.
- Reinstall Constant Flow Valve: Reinstallare la valvola a flusso costante nella valvola angolare.
- Flangia di installazione: Install expansion screws into the flange and mount the flange at the drain, ensuring it is centered.
- Posizione Toilette: Lift the upper half of the toilet. Align the flange and screws with the bottom of the toilet.
- Toilette sicura: Install the flat washer and nut to secure the toilet to the flange.
- Collegare il tubo di ingresso dell'acqua: Connect the braided tube to the angle valve and the toilet's water inlet. Pay attention not to bend the tube. Open the angle valve to the maximum and check for leaks.
- Accensione: Plug the toilet into a suitable power outlet.
Video 1: WinZo Smart Toilet Installation Guide. This video demonstrates the step-by-step process for installing the smart toilet, including preparing the water connection and securing the unit.
Istruzioni per l'uso
Your WinZo Smart Toilet offers a range of intelligent features for enhanced comfort and hygiene.
Funzioni automatiche
- Funzionamento del sensore del piede: The lid and seat automatically open when you approach the toilet and close/flush when you leave.
- Pre-umidificazione: The bowl is pre-moistened before use to prevent waste adhesion.
- Scarico automatico: Flushes automatically after use.

Figure 3: Auto-Sensing Features

Figure 4: Pre-Moistening Function
Bidet and Drying Functions
- Sedile riscaldato: The seat provides instant warmth with 4 adjustable temperature levels.
- Bidet ad acqua calda: Offers instant warm water for washing with adjustable temperature.
- Modalità di pulizia: Includes Female Cleaning, Hip Cleaning, and Mobile Cleaning.
- Asciugatura ad aria calda: After washing, a warm air dryer provides comfort.

Figure 5: Heated Seat Functionality

Figura 6: Modalità di pulizia multiple
Caratteristiche aggiuntive
- Luce notturna: A light-sensitive night light illuminates the bowl for nighttime use.
- Telecomando: All functions can be controlled via the included remote.

Figure 7: Soft Night Light Illumination
Video 2: WinZo Smart Toilet Features Overview. This video demonstrates various operational features including cleaning modes, heated seat, and automatic functions.
Manutenzione
Regular maintenance ensures the longevity and hygienic operation of your WinZo Smart Toilet.
Pulizia
- Dynamic Cleaning Module: The built-in dynamic cleaning module activates high-frequency short-wave closed irradiation for deep cleaning of the toilet bowl.
- Autopulizia degli ugelli: The bidet nozzles perform a self-cleaning cycle before and after each use.
- Ultraviolet Spray Bar Sterilization: Automatically turns on UV sterilization after closing the lid for a round scanning to prevent cross-infection.
- Individual Water Line Cleaning: Ensures hygiene by cleaning individual water lines.

Figure 8: Ultraviolet Spray Bar Sterilization

Figure 9: Individual Cleaning of Water Lines
Pulizia generale
Utilizzare un morbido, damp cloth and mild, non-abrasive cleaner for external surfaces. Avoid harsh chemicals that may damage the finish or electronic components.
Risoluzione dei problemi
Se riscontri problemi con il tuo WinZo Smart Toilet, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna alimentazione/Unità non reattiva | Cavo di alimentazione scollegato, interruttore automatico scattato. | Ensure power cord is securely plugged in. Check and reset circuit breaker if necessary. |
| No water for bidet/flush | Water supply valve closed, low water pressure. | Open the angle valve fully. Check household water pressure. |
| Il coperchio/sedile non si apre automaticamente | Foot sensor obstructed or dirty. | Clean the foot sensor area. Ensure no objects are blocking the sensor. |
| Il sedile riscaldato non funziona | Heated seat function turned off, temperature setting too low. | Activate heated seat function via remote. Adjust temperature setting. |
| Perdita d'acqua | Loose connections in water inlet pipe or angle valve. | Tighten all water connections. If leakage persists, contact customer support. |
Per problemi non elencati qui o se le procedure di risoluzione dei problemi non risolvono il problema, contattare l'assistenza clienti WinZo.
Specifiche
Detailed specifications for the WinZo Smart Toilet SM8008-2.
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | Modello SM8008-2 |
| Dimensioni del prodotto | 27"P x 15.41"L x 18.9"A |
| Materiale | Ceramic (Bowl), Plastic (Seat) |
| Peso dell'articolo | 98 libbre |
| Tipo di installazione | Montaggio a pavimento |
| Forma | Ovale |
| Conformità ADA | ADA Comfort Height (17'' floor-to-bowl) |
| Efficienza idrica | Less than 1.28 gallons per flush |
| Requisiti di pressione dell'acqua | Over 0.14Mpa |
| Flow Rate Requirement | Over 18L/min |
| Componenti inclusi | Servizi igienici intelligenti |

Figura 10: Dimensioni del prodotto

Figure 11: ADA Comfort Height
Garanzia e supporto
WinZo provides a manufacturer's warranty for this product. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official WinZo websito. Conserva la ricevuta d'acquisto come prova d'acquisto.
Informazioni sui contatti: Please refer to the contact details provided in your product packaging or on the official WinZo websito per il servizio clienti e l'assistenza.