KEMIMOTO 3-IN-1 Front Flip Windshield Instruction Manual

1. Prodotto finitoview

The KEMIMOTO 3-IN-1 Front Flip Windshield is designed to provide versatile protection and comfort for your Polaris General UTV. Constructed from durable polycarbonate, it offers three operational modes: fully open for maximum airflow, vented for fresh air circulation, and fully closed for complete weather protection.

Caratteristiche principali:

• Flexible 3-IN-1 Design: Functions as a vented front windshield, a full windshield, or fully open.
• Manico regolabile: Allows for easy transition between modes.
• Maggiore durata: Made from 1/5 inch thick, double-sided hardened PC material, offering superior resistance to shock, shattering, and corrosion. It is 250 times stronger than glass and 25 times stronger than acrylic.
• Visibilità chiara: Ensures good light transmission and helps soften UV radiation.
• Riduzione del rumore: Features a pre-installed rubber seal to minimize engine and road noise.
• Upgraded Clamps: Robusto metallo clamps replace plastic alternatives for improved reliability.
• Pre-Installed Rubber Strip: For convenience and a secure seal.

2. Compatibilità

This windshield is compatible with the following Polaris General models:

• Polaris General 1000 (2016-2026)
• Polaris General 4 1000 (2016-2026)
• Polaris General XP 1000 (2016-2026)
• Polaris General XP 4 1000 (2016-2026)

3. Cosa c'è nella scatola

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 1X Windshield
• 1 Set of Mounting Hardware

4. Istruzioni per l'installazione

Follow these steps for proper installation of your KEMIMOTO 3-IN-1 Front Flip Windshield. It is recommended to have a second person assist during certain steps.

1. Preparare il parabrezza: If a protective film is present, carefully remove it from both sides of the windshield.
2. Fissare le staffe: Secure the mounting brackets to the windshield using the provided hardware. Ensure all bolts are hand-tightened initially.
3. Posizione Parabrezza: Carefully place the windshield onto your UTV's frame, aligning the brackets with the designated mounting points.
4. Secure to UTV: Attach the windshield assembly to the UTV frame using the remaining mounting hardware. Adjust the position of the brackets as needed to achieve a proper fit.
5. Serraggio finale: Once the windshield is correctly positioned and aligned, securely tighten all bolts. Do not overtighten.

Videoguida all'installazione

Removing Windshield Film Video Guide

5. Istruzioni per l'uso

The 3-IN-1 design allows for flexible use depending on weather conditions and personal preference.

• Completamente aperto: For maximum airflow and an open-air experience, push the windshield completely forward and secure it in the open position.
• Vented Mode: To allow fresh air circulation while maintaining some protection, adjust the windshield to the vented position using the adjustable handle. This allows cool air to enter the UTV.
• Completamente chiuso: For complete protection against cold wind, rain, dust, and debris, pull the windshield back to the fully closed position.

Guida video operativa

6. Manutenzione

Proper maintenance will extend the life and clarity of your windshield.

• Pulizia regolare: Gently wipe the windshield surface with a soft, clean cloth and mild soap and water. Avoid abrasive cleaners or brushes that can scratch the polycarbonate material.
• Macchie ostinate: For more stubborn dirt or mud, soak the cleaning cloth briefly before wiping.
• Ispezionare le guarnizioni: Periodically check the rubber seals for any signs of wear or damage to ensure continued noise reduction and weather protection.

Cleaning Dust Video Guide

Cleaning Mud Video Guide

7. Risoluzione Dei Problemi

If you encounter issues with your flip-up windshield, refer to the following common solutions.

• Difficulty Flipping: Ensure all mounting hardware is correctly aligned and not overtightened. Check for any obstructions in the hinge mechanism.
• Gaps or Loose Fit: Verify that the rubber seals are properly seated and undamaged. Re-check the tightness of all mounting clamps e regolare se necessario.
• Rumore eccessivo: Inspect the rubber seal around the perimeter of the windshield for any gaps or damage. Ensure the windshield is fully closed and secured when in the closed position.

Guida video per la risoluzione dei problemi

8. Specifiche

9. Informazioni sulla garanzia

KEMIMOTO provides a manufacturer warranty for 12 months from the date of purchase. Please retain your proof of purchase for any warranty claims.

10. Assistenza clienti

For further assistance, technical support, or to inquire about replacement parts, please refer to the contact information provided with your purchase or visit the official KEMIMOTO websito.