Introduzione
This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your OHLPRO Aluminum Tablet Wall Mount Holder. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold tablets and smartphones ranging from 5 to 13 inches, offering adjustable viewing angles and extension for various applications.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- 1 x 3-Section Aluminum Arm
- 1 x Tablet Clamp
- 1 chiave esagonale
- 8 x M5 Screws (4 long, 4 short)
- 4 x tubi di espansione
Figura 1: Contenuto della confezione
Configurazione e installazione
The OHLPRO Aluminum Tablet Wall Mount requires drilling for secure installation. Ensure you have appropriate drilling tools before proceeding.
1. Arm Assembly (Optional)
The 3-section aluminum arm can be disassembled and reassembled to customize its length and configuration. Use the provided hex key to remove or add arm sections as needed. Ensure all screws are tightened securely after reassembly.
Video 1: Free Assembly of OHLPRO Tablet Wall Mount. This video demonstrates how to disassemble and reassemble the arm sections of the mount using the hex key.
2. Montaggio a parete
- Select a suitable location on a sturdy wall for installation.
- Position the base plate of the mount against the wall and mark the drilling points.
- Drill pilot holes at the marked locations. Insert the expansion tubes if necessary for your wall type.
- Secure the base plate to the wall using the appropriate M5 screws.
3. Attaching the Tablet Clamp
- The tablet clamp attaches to the ball head at the end of the arm.
- Tighten the screw on the ball head using the hex key to secure the tablet clamp.
4. Adjusting Base Orientation (Optional)
If you need to change the orientation of the mount's base on the wall, remove the base screws, rotate the mount 90 degrees, and then re-secure the screws. This allows for horizontal or vertical extension from the wall.
Figure 2: Base Rotation and Joint Adjustment
Video 2: Installation and Use of OHLPRO Aluminum Tablet Wall Mount. This video demonstrates the full installation process and initial usage of the mount.
Istruzioni per l'uso
The OHLPRO Tablet Wall Mount offers extensive adjustability for optimal viewing.
1. Posizionamento del dispositivo
The tablet clamp is compatible with devices from 5 to 13 inches. The maximum clamp opening is 9.2 inches (23.5 cm). For tablets larger than 10.2 inches, mount the device on its shorter sides to ensure a secure fit. The 0.78-inch (20 mm) side clearance accommodates most protective cases.
Figure 3: Tablet Clamp Compatibilità
2. Adjusting Position and Angle
The mount features a 360° rotating head ball and multiple angle adjustments along its three-stage arm. You can extend, raise, lower, or fold the arm to achieve your desired viewing position. Use the included hex key to tighten the rotating screws at the joints for enhanced stability once the desired position is set.
Figure 4: Mount in Office Use
Figure 5: Mount in Kitchen Use
Figure 6: Sturdy Metal Arm
Manutenzione
To ensure the longevity and optimal performance of your OHLPRO Tablet Wall Mount, follow these maintenance guidelines:
- Pulizia: Wipe the mount regularly with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Serraggio delle viti: Periodically check all screws, especially those at the joints and the wall mounting points, to ensure they remain tight. Re-tighten with the hex key if any looseness is detected to maintain stability.
- Lubrificazione delle articolazioni: If the arm joints become stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts.
Risoluzione dei problemi
If you encounter issues with your OHLPRO Tablet Wall Mount, refer to the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Mount sags or does not hold position | Joint screws are loose. | Use the provided hex key to tighten all joint screws firmly. |
| Tablet does not fit securely in the clamp | Tablet size exceeds clamp capacity or is incorrectly oriented. | Ensure your device is between 5-13 inches. For devices over 10.2 inches, mount on the shorter sides. Check for case compatibility (max 0.78 inch thickness). |
| Mount feels unstable on the wall | Wall mounting screws are loose or wall material is insufficient. | Re-tighten wall mounting screws. Ensure the mount is installed on a sturdy surface using appropriate anchors (expansion tubes). |
Specifiche
- Marca: OHLPRO
- Nome modello: Aluminum iPad Wall Mount Holder
- Numero modello: Q05-P3
- Fattore di forma: Montaggio a parete
- Dispositivi compatibili: 5-13 inch tablets and smartphones (Max clamp opening: 9.2 inches / 23.5 cm)
- Tipo di montaggio: Drilling base installation
- Lunghezza regolabile: Yes (up to 23.6 inches / 60 cm)
- Caratteristiche speciali: 360° Rotation, Adjustable, Metal Arm, Retractable, Hand-Free, Stable Support
- Materiale: Aluminum Alloy, Acrylonitrile Butadiene Styrene
Garanzia e supporto
The OHLPRO Aluminum Tablet Wall Mount Holder comes with a Garanzia di 2 anno. If you have any questions, concerns, or require assistance with your product, please contact OHLPRO customer service. Our professional after-sales team is available to help resolve any issues with sincerity and expertise.