Introduzione
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SYLVOX Mobile TV Floor Stand. This heavy-duty rolling TV stand is designed for 65-75 inch flat or curved televisions, supporting a maximum load of 132 lbs (60 kg). It features lockable wheels for mobility and stability, universal VESA compatibility, and integrated cable management.
Per garantire un funzionamento sicuro e corretto, leggere attentamente il presente manuale prima dell'installazione e dell'uso.
Informazioni sulla sicurezza
- Capacità di peso: Do not exceed the maximum load capacity of 132 lbs (60 kg). Overloading can cause instability and potential injury.
- Dimensioni TV: This stand is designed for 65-75 inch TVs. Ensure your TV's size and weight are within the specified limits.
- Compatibilità VESA: Verify your TV's VESA mounting pattern is within the supported range (200x200mm to 1200x600mm).
- Montaggio: Assemble the stand on a soft, clean surface to prevent scratches. Ensure all screws are tightened securely before mounting the TV.
- Stabilità: Always engage the locking wheels when the stand is in a stationary position to prevent accidental movement.
- Movimento: When moving the stand, ensure the TV is securely attached and move slowly and carefully, especially over uneven surfaces.
- Bambini e animali domestici: Keep children and pets away from the stand during assembly and ensure the TV is securely mounted to prevent tipping.
Contenuto della confezione
Verificare che tutti i componenti siano presenti e integri. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.
- Main Frame Components (Base, Vertical Columns, Crossbars)
- Staffe di montaggio TV
- Lockable Caster Wheels (x4)
- Hardware Kit (various screws, washers, spacers for assembly and TV mounting)
- Cable Management Box/Clips
- Assembly Tools (e.g., Allen wrench, small spanner)
- Manuale di istruzioni
Installazione e assemblaggio
Follow these steps carefully for proper assembly. It is recommended to have two people for TV mounting.
Step 1: Assemble the Base and Vertical Columns
- Attach the caster wheels to the base legs. Ensure two of the wheels are lockable and positioned as per the diagram.
- Connect the vertical support columns to the base using the provided screws and tools.
- Secure any crossbars or shelves to the vertical columns as indicated in the assembly diagram.
Image: Initial assembly of the stand's base and vertical supports.
Passaggio 2: collegare le staffe di montaggio TV al televisore
- Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita.
- Identifica i fori di montaggio VESA sul retro del televisore.
- Seleziona dal kit di ferramenta le viti, le rondelle e i distanziali adatti allo schema VESA del tuo televisore.
- Attach the TV mounting brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
Image: Diagram showing VESA mounting hole patterns and bracket attachment.
Fase 3: Montare la TV sul supporto
- With assistance, carefully lift the TV and hook the attached mounting brackets onto the main frame of the stand.
- Assicurarsi che la TV sia centrata e in piano.
- Secure the TV to the stand using the safety screws or locking mechanisms on the brackets.
Videoguida all'installazione
Video: Official SYLVOX Rolling TV Stand Installation Guide. This video demonstrates the step-by-step assembly process for the TV stand.
Istruzioni per l'uso
Mobilità e stabilità
The stand is equipped with four heavy-duty caster wheels for easy movement. Two of these wheels are lockable to ensure stability when the stand is stationary.
- Spostare: Unlock the two lockable wheels by flipping their levers. Gently push the stand to your desired location.
- Per proteggere: Once in position, engage the locks on the two lockable wheels to prevent unintended movement.
Image: Close-up of lockable casters and illustration of stand mobility.
Gestione dei cavi
Utilize the integrated cable management features to keep your setup tidy and prevent cable tangles.
- Route TV and device cables through the designated cable clips or channels on the stand's frame.
- Use the compact storage box (if included) to house small streaming devices or remote controls, keeping them out of sight.
Immagine: Example of cables neatly routed through the stand's frame.
Manutenzione
- Pulizia: Pulisci il supporto con un panno morbido e asciutto. Per macchie ostinate, usa un panno leggermenteamp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners.
- Controllo hardware: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario.
- Ruote piroettanti: Keep the caster wheels free of debris (hair, dust, etc.) to ensure smooth rolling. Lubricate if needed.
- Condizioni ambientali: While the stand is robust, prolonged exposure to extreme weather conditions (e.g., heavy rain, direct sunlight for extended periods) may affect its finish and longevity. If used outdoors, consider covering it when not in use.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il supporto è instabile o traballa. | Screws are loose; TV is too heavy or not centered; uneven floor. | Check and tighten all assembly screws. Ensure TV weight is within limits and centered. Move to a level surface or use shims if necessary. |
| Le ruote girevoli non scorrono fluidamente. | Detriti intrappolati nelle ruote; le ruote sono bloccate. | Clear any debris from the wheels. Ensure lockable wheels are in the unlocked position. |
| La TV non è adatta alle staffe di montaggio. | Schema VESA errato; viti/distanziali utilizzati non corretti. | Verify your TV's VESA pattern matches the stand's compatibility (200x200mm to 1200x600mm). Use the correct screws and spacers from the hardware kit. |
| Parti mancanti o componenti danneggiati. | Errore di imballaggio o danni durante la spedizione. | Contact SYLVOX customer support immediately for assistance. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | SILVOX |
| Modello | B0FD3C5CFN |
| Tipo di montaggio | Montaggio a pavimento |
| Tipo di movimento | Rotate (implies swivel, not full rotation) |
| Materiale | Acciaio legato |
| Colore | Nero |
| Dispositivi compatibili | Televisione |
| Minimum Supported Screen Size | 60 pollici |
| Maximum Supported Screen Size | 120 pollici (Note: Product title specifies 65-75 inches, but specifications list up to 120 inches. User should verify VESA for larger TVs.) |
| Capacità di carico massima | 132 libbre (60 kg) |
| Compatibilità VESA | da 200x200mm a 1200x600mm |
| Produttore | Kontech |
Image: Technical drawing showing the dimensions of the TV stand.
Garanzia e supporto
Informazioni sulla garanzia
This SYLVOX TV Floor Stand comes with a Garanzia di 1 anno from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the specified weight capacity.
Per i reclami in garanzia, conservare la prova d'acquisto.
Assistenza clienti
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact the seller, FutureIntelligence, through your purchase platform. They can provide assistance and guidance.
For general inquiries about SYLVOX products, you may visit the official SYLVOX store on Amazon: SYLVOX Amazon Store
