Traxon XB.W3.8370110

Traxon Allegro XB36 Outdoor LED Wall Washer Flood Instruction Manual

Model: XB.W3.8370110

1. Introduzione

This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.

The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.

Traxon Allegro XB36 LED Wall Washer Flood Light, front-side view

Figura 1: Lato anteriore view of the Traxon Allegro XB36 LED Wall Washer Flood Light.

2. Informazioni sulla sicurezza

  • Rischio elettrico: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
  • Voltage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
  • Messa a terra: Assicurarsi che l'apparecchio sia correttamente collegato a terra per evitare scosse elettriche.
  • Uso esterno: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
  • Temperatura: Do not operate the fixture outside its specified ambient temperature range.
  • Gestione: Maneggiare l'apparecchio con cura. Evitare di farlo cadere o di sottoporlo a urti violenti.
  • Sorgente luminosa: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti e integri al momento del disimballaggio:

  • Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
  • Staffa di montaggio (pre-fissata o separata)
  • Manuale di istruzioni (questo documento)

Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.

4. Configurazione e installazione

4.1 Montaggio dell'apparecchiatura

  1. Seleziona Località: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
  2. Posizione della staffa: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
  3. Dispositivo sicuro: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.

4.2 Collegamento elettrico

The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.

Posteriore view of Traxon Allegro XB36 showing IN and OUT power ports

Figura 2: Posteriore view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.

  1. Disconnessione dell'alimentazione: Prima di effettuare qualsiasi collegamento elettrico, disattivare l'alimentazione principale tramite l'interruttore automatico.
  2. Collegare l'alimentazione in ingresso: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
  3. Collegamento a margherita (facoltativo): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
  4. Connessioni sicure: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.
Posteriore view of Traxon Allegro XB36 with power cables connected to IN and OUT ports

Figura 3: Posteriore view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.

Important: All wiring must comply with local electrical codes and regulations.

5. Istruzioni per l'uso

  1. Accensione: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
  2. dimming: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
  3. Angolo del fascio: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
  4. Regolazione: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.

6. Manutenzione

The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.

  • Pulizia: Pulire periodicamente la lente e l'alloggiamento con un panno morbido eamp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents.
  • Ispezione: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
  • Riparazioni: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.

7. Risoluzione Dei Problemi

Problema Possibile causa Soluzione
Fixture does not illuminate. No power supply; loose electrical connection; faulty fixture. Check circuit breaker and power source. Verify all electrical connections are secure. If problem persists, contact support.
L'emissione luminosa è incoerente o tremolante. Incompatible dimmer switch; loose connection; power fluctuations. Ensure a compatible phase-cut dimmer is used. Check electrical connections. Consult an electrician for power supply issues.
Infiltrazioni d'acqua all'interno dell'apparecchio. Improperly sealed cable glands or damaged housing. Immediately disconnect power. Inspect cable glands and housing for damage. Contact support for repair or replacement.

8. Specifiche

  • Modello: XB.W3.8370110
  • Marca: Traxon
  • Ingresso volumetage: 120 V CA
  • Cosatage: 44 watt
  • Flusso luminoso: 2631 lumen
  • Temperatura del colore (CCT): 3000K
  • Distribuzione della luce:
  • dimming: Phase Cut Dimmable
  • Grado di protezione IP: IP66 (classificazione per esterni)
  • Costruzione: Aluminum/Glass
  • Fine: Nero
  • Peso dell'articolo: 13.14 libbre (5.96 kg)
  • Dimensioni del prodotto: 9 x 5.3 x 11.3 pollici (22.86 x 13.46 x 28.7 cm)
  • Produttore: Osram

9. Informazioni sulla garanzia

Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.

10. Supporto

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.