Manuale di istruzioni

Introduzione

This manual provides essential instructions for the installation, operation, and maintenance of the Fricpart-105171 Washer Water Drain Pump. This component is designed as a replacement part compatible with Kenmore washing machine model 796.40311900. Please read this manual thoroughly before attempting any installation or repair to ensure safe and correct usage.

Informazioni sulla sicurezza

• Always disconnect the washing machine from the power supply before attempting any service or installation.
• Prima di iniziare qualsiasi lavoro, chiudere l'alimentazione idrica della lavatrice.
• Durante l'installazione, indossare adeguati dispositivi di protezione individuale, come guanti e protezioni per gli occhi.
• Ensure all connections are secure and leak-free after installation to prevent water damage.
• In caso di dubbi su un passaggio, consultare un tecnico qualificato.

Contenuto della confezione

Il tuo pacco dovrebbe contenere i seguenti articoli:

• One (1) Fricpart-105171 Washer Water Drain Pump

This image displays the Fricpart-105171 washer water drain pump. It features a black housing with a visible white three-bladed impeller inside a grey circular chamber. Mounting holes are visible on the black flange.

Configurazione e installazione

1. Preparazione: Before beginning, ensure the washing machine is completely disconnected from its power source and the water supply is turned off.
2. Accesso alla pompa: Refer to your specific Kenmore 796.40311900 washing machine's service manual for instructions on how to safely access and remove the existing drain pump. This typically involves removing panels or tilting the machine.
3. Verifica compatibilità: Carefully compare the new Fricpart-105171 drain pump with the original part to confirm it is the correct replacement for your Kenmore 796.40311900 model. Appliance parts can appear similar, so verification is crucial.
4. Rimuovere la vecchia pompa: Disconnect any electrical wiring and hoses attached to the old drain pump. Be prepared for residual water to drain out. Remove the mounting screws or clips securing the old pump.
5. Installare la nuova pompa: Position the new Fricpart-105171 drain pump in place and secure it with the appropriate mounting hardware.
6. Collegare i tubi flessibili e il cablaggio: Reattach all hoses, ensuring they are clamped securely to prevent leaks. Reconnect the electrical wiring to the new pump. Double-check all connections.
7. Test per perdite: Before fully reassembling the washer, slowly turn on the water supply and check for any leaks around the newly installed pump and hose connections. Address any leaks immediately.
8. Ripristina alimentazione: Once satisfied that there are no leaks, restore power to the washing machine.
9. Operazione di prova: Run a short drain cycle or a complete wash cycle to confirm the new drain pump is functioning correctly.

Istruzioni per l'uso

The Fricpart-105171 Washer Water Drain Pump operates automatically as an integral part of your washing machine's cycle. It is designed to remove water from the wash tub during the drain and spin phases. No manual operation or intervention is required for the pump itself once correctly installed.

Manutenzione

To ensure the longevity and efficient operation of your drain pump, consider the following maintenance tips:

• Ispezione regolare: Periodically inspect the drain pump and its connecting hoses for any signs of wear, cracks, blockages, or leaks.
• Rimozione detriti: If your washing machine model includes a pump filter or coin trap, regularly clean it to prevent debris from obstructing the pump's impeller. Refer to your washer's user manual for filter location and cleaning instructions.
• Evitare il sovraccarico: Overloading the washing machine can put undue stress on the drain system, including the pump.

Risoluzione dei problemi

If you encounter issues with your washing machine's draining function, consider these common troubleshooting steps:

• La lavatrice non scarica:
  • Controllare che il tubo di scarico non sia piegato o ostruito.
  • Inspect the pump filter (if applicable) for debris.
  • Ensure the pump is receiving electrical power.
  • Verify the pump impeller is not obstructed by foreign objects.
• Unusual Noises During Drain Cycle:
  • Foreign objects may be caught in the pump. Disconnect power and inspect the pump chamber.
  • Ensure the pump is securely mounted and not vibrating against other components.
• Leaks Around the Pump:
  • Check all hose connections for tightness and proper sealing.
  • Ispezionare l'alloggiamento della pompa per verificare la presenza di crepe o danni.

If these steps do not resolve the issue, it may indicate a more complex problem requiring professional service.

Specifiche

Garanzia e supporto

Warranty information for this replacement part may be available from the seller or manufacturer. Please refer to your purchase documentation or contact the point of sale for specific details regarding warranty coverage.

For technical assistance, installation guidance, or further inquiries, please contact the seller or manufacturer directly using the contact information provided with your purchase.