Coolpie CR220 Dual-Bay M.2 NVMe SATA SSD Cloner User Manual

Introduzione

Thank you for choosing the Coolpie CR220 Dual-Bay M.2 NVMe SATA SSD Cloner. This device is designed for efficient and reliable data cloning and transfer between M.2 NVMe and SATA SSDs. It supports both offline cloning and high-speed data access when connected to a computer. Please read this manual carefully to ensure proper usage and optimal performance.

Contenuto della confezione

• Coolpie CR220 Dual-Bay M.2 NVMe SATA SSD Cloner
• Cavo da USB-C a USB-A
• Adattatore di alimentazione
• Manuale d'uso

Impostare

1. Installazione hardware

The Coolpie CR220 features a tool-free design for easy SSD installation. Simply insert your M.2 SSDs into the designated slots.

Insert M.2 SSDs into the designated slots on the docking station. The tool-free design allows for easy installation.

The Coolpie CR220 docking station with two M.2 SSDs installed, ready for operation.

2. Collegamento all'alimentazione e al computer

Connect the power adapter to the DC port on the docking station and plug it into a power outlet. If using the device with a computer, connect the USB-C to USB-A cable from the docking station's Type-C port to your computer's USB port.

Modalità operative

The Coolpie CR220 offers two primary operating modes: Offline Cloning (COPY) and Read & Write (JBOD), selected via a physical switch.

The device features a switch to select between 'COPY' mode for offline cloning and 'JBOD' mode for direct read/write access via computer.

1. Offline Cloning (COPY Mode)

This mode allows you to clone data from a source SSD to a target SSD without needing a computer connection. Ensure both SSDs are of the same protocol (NVMe to NVMe or SATA to SATA).

Detailed steps for offline cloning: Insert SSDs, set the switch to 'COPY', power on, and then long-press the clone button.

Passaggi per la clonazione offline:

1. Inserire il Origine SSD into slot A and the SSD di destinazione nello slot B.
2. Assicurarsi che la capacità dell'SSD di destinazione sia uguale o superiore alla capacità dell'SSD di origine.
3. Set the mode switch on the device to "COPY".
4. Premere il pulsante di accensione per accendere il dispositivo.
5. Long-press the "Clone" button (usually marked with a double-arrow icon) for 5 seconds until the LED indicators begin to flash, indicating the cloning process has started.
6. The LED indicators will show the cloning progress (25%, 50%, 75%, 100%).
7. Una volta che tutti i LED sono accesi, il processo di clonazione è completato.

For offline cloning, ensure the target SSD (B) has equal or greater capacity than the source SSD (A). Press and hold the clone button for 5 seconds to initiate the process.

2. Read & Write (JBOD Mode)

In JBOD mode, the docking station acts as an external drive enclosure, allowing your computer to read and write data to the inserted SSDs at high speeds.

Steps for read/write operations: Insert SSDs, set the switch to 'JBOD', power on, and access the drives from your computer.

Steps for Read & Write:

1. Insert the M.2 SSD(s) into the desired slot(s).
2. Connect the docking station to your computer using the provided USB-C to USB-A cable.
3. Set the mode switch on the device to "JBOD".
4. Premere il pulsante di accensione per accendere il dispositivo.
5. Your computer should recognize the inserted SSD(s) as external storage devices.

3. Compatibility and Performance

The Coolpie CR220 supports both M.2 NVMe (M Key) and M.2 SATA (B+M Key) SSDs in various standard sizes (2230, 2242, 2260, 2280, 22110). It is compatible with Windows, macOS, and Linux operating systems.

The docking station supports M.2 NVMe (M Key) and M.2 SATA (B+M Key) SSDs in sizes 2230, 2242, 2260, 2280, and 22110.

With a USB 3.2 Gen2x2 interface, the device achieves theoretical speeds up to 20Gbps for NVMe SSDs and 6Gbps for SATA SSDs, enabling rapid data transfers.

The device offers high-speed data transmission up to 20Gbps, suitable for demanding tasks like video editing.

Achieve high data transfer rates: up to 1735MB/s read and 1644MB/s write for NVMe, and 543MB/s read and 518MB/s write for SATA.

The docking station supports dual 8TB drives, for a total capacity of 16TB, accommodating large data migration projects.

The docking station supports a total capacity of 16TB, with two slots each accommodating up to 8TB SSDs.

The device is compatible with various operating systems including Windows, macOS, and Linux, and can be used with PCs, laptops, iPads, smartphones, and PS4.

Considerazioni importanti

Protocol Matching for Cloning

For successful offline cloning, the Coolpie CR220 requires that both the source and target SSDs use the same protocol. This means you must clone NVMe to NVMe, or SATA to SATA. The device cannot mix NVMe and SATA drives in the same cloning operation.

Ensure both source and target SSDs use the same protocol (NVMe to NVMe or SATA to SATA) for cloning. Mixing NVMe and SATA drives is not supported for cloning.

Specifiche

Risoluzione dei problemi

Problemi comuni e soluzioni:

• Cloning Fails or Data is Not Transferred:
  • Ensure both source and target SSDs are of the same protocol (NVMe to NVMe or SATA to SATA). Mixing protocols is not supported for cloning.
  • Verify that the target SSD's capacity is equal to or greater than the source SSD's capacity.
  • Check for any RAID settings in your computer's BIOS if you are experiencing issues with drive recognition or cloning, especially with certain PC brands. Temporarily disabling RAID might be necessary for cloning, then re-enable it after the process.
  • Ensure the clone button is pressed and held for the required 5 seconds to initiate the process.
• Dispositivo non riconosciuto dal computer:
  • Confirm the device is in "JBOD" mode when connected to a computer.
  • Assicurarsi che il cavo USB sia collegato saldamente sia alla docking station che al computer.
  • Prova una porta USB diversa sul tuo computer.
  • Verificare che l'adattatore di alimentazione sia collegato correttamente e che il dispositivo sia acceso.
• Velocità di trasferimento dati lente:
  • Ensure your computer's USB port supports USB 3.2 Gen2x2 for optimal speeds. Using a slower USB port will result in reduced performance.
  • Confirm you are using the provided high-speed USB cable.

Manutenzione

To ensure the longevity and proper functioning of your Coolpie CR220, follow these maintenance guidelines:

• Mantenere pulito il dispositivo pulendolo con un panno morbido e asciutto. Evitare l'uso di detergenti liquidi o solventi.
• Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Evitare di far cadere o sottoporre il dispositivo a forti impatti.
• Always safely eject the drives from your computer before disconnecting the docking station in JBOD mode.

Garanzia e supporto

Coolpie products are designed for reliability and performance. For any technical assistance, troubleshooting, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Coolpie website. Our expert technical team is available to assist you with any challenges or setup questions.