FUCCEOGJ FH4-4CRNB Digital Counter Meter User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of the FUCCEOGJ FH4-4CRNB Digital Counter Meter. Please read this manual thoroughly before using the device to ensure correct operation and to prevent damage.

2. Prodotto finitoview

The FUCCEOGJ FH4-4CRNB is a versatile 4-preset digital counter meter designed for industrial applications. It features a clear digital display, multiple preset capabilities, and relay output for control functions. The compact 48x48mm design allows for easy integration into control panels.

Figura 2.1: Davanti view of the FH4-4CRNB Digital Counter Meter. This image displays the digital display, control buttons (SET, R/CST, Up, Down), and indicator lights for PV (Process Value) and SV (Set Value), along with output status indicators.

3. Specifiche

4. Informazioni sulla sicurezza

• Always disconnect power before installation, wiring, or maintenance to prevent electric shock.
• Ensure wiring is performed by qualified personnel in accordance with local electrical codes.
• Do not operate the device in environments with excessive moisture, dust, corrosive gases, or high temperatures.
• Verificare che l'alimentazione vol.tage corrisponde alle specifiche del dispositivo (90-260 V CA/CC).
• Avoid strong vibrations or impacts to the device.

5. Installazione

1. Montaggio a pannello: Cut a panel opening of 45x45mm (standard 1/16 DIN size) for the meter.
2. Insert Meter: Insert the FH4-4CRNB meter into the panel opening from the front.
3. Sicuro: Use the provided mounting brackets to secure the meter firmly in place from the rear of the panel.
4. Cablaggio: Refer to the wiring diagram in Section 6 for proper electrical connections. Ensure all connections are secure.
5. Accensione: After verifying all connections, apply power to the device.

6. Schema elettrico

The following diagram illustrates the terminal connections for the FH4-4CRNB Digital Counter Meter. Pay close attention to the power input, relay output, and signal input terminals.

Figura 6.1: Lato view of the FH4-4CRNB Digital Counter Meter showing the wiring diagram. This diagram details connections for power (90-260V AC/DC), relay output (OUT1: NC, NO, COM), reset (RST), 24V auxiliary power, and signal inputs (INA, INB, GND).

Descrizioni dei terminali:

• 90-260V AC/DC: Terminali di ingresso alimentazione.
• OUT1 (NC, NO, COM): Relay output contacts. NC (Normally Closed), NO (Normally Open), COM (Common).
• prima: Reset input terminal.
• 24V: Auxiliary 24V DC power output (for sensors, etc.).
• INA, INB: Signal input terminals for counting.
• TERRA: Terminale di terra.

7. Funzionamento

7.1. Accensione

Upon applying power, the meter will perform a self-test and then display the current count (PV) and the set value (SV).

7.2. Impostazione dei preset

1. Premere il tasto IMPOSTATO pulsante per accedere alla modalità di impostazione dei parametri.
2. Utilizzare il Su (▲) E Giù (▼) buttons to navigate through parameters or adjust values.
3. Premere IMPOSTATO again to confirm a value and move to the next parameter.
4. The FH4-4CRNB supports up to 4 presets. Configure each preset value as required for your application.
5. To exit setting mode, press and hold the IMPOSTATO button, or the meter will automatically exit after a period of inactivity.

7.3. Funzione di conteggio

The meter counts pulses received at the INA/INB terminals. The current count is displayed as PV. When the PV reaches a set preset value, the corresponding relay output will activate.

7.4. Resetting the Counter

To reset the counter (PV) to zero, press the R/CST button on the front panel, or activate the external reset input (RST terminal).

8. Manutenzione

• Mantenere il misuratore pulito e privo di polvere. Per la pulizia, utilizzare un panno morbido e asciutto.
• Regularly inspect wiring connections for looseness or damage.
• Assicurarsi che l'ambiente operativo rimanga entro gli intervalli di temperatura e umidità specificati.
• No user-serviceable parts are inside. Do not attempt to open the casing.

9. Risoluzione Dei Problemi

9.1. Meter Does Not Power On

• Controllare l'alimentazione voltage to ensure it is within the 90-260V AC/DC range.
• Verify all power wiring connections are secure and correct according to the diagram.
• Check for blown fuses in the power circuit, if applicable.

9.2. Counter Not Counting

• Ensure the signal input (INA/INB) is correctly wired and receiving pulses.
• Verify the signal source is functioning correctly and providing appropriate signals.
• Check parameter settings to ensure the counting mode is correctly configured.

9.3. Relay Output Not Activating

• Confirm that the current count (PV) has reached or exceeded the set preset value (SV).
• Check the relay output wiring for correct connections (NC, NO, COM).
• Verify that the output mode parameters are correctly configured in the settings.

10. Garanzia e supporto

Specific warranty information for the FUCCEOGJ FH4-4CRNB Digital Counter Meter is typically provided at the point of purchase or within the product packaging. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your vendor or the manufacturer directly. Ensure you have your product model number (FH4-4CRNB) and purchase details available when seeking support.

11. Video ufficiali dei prodotti

Al momento non sono disponibili video ufficiali del venditore per questo modello.